The scale and sheet size of sketch plans shall be as required for preliminary plans in § 137-16A(1) and (4). The sketch plan shall show or be accompanied by the following data, legible in every detail and drawn to scale, but not necessarily containing precise dimensions:
A. 
Name and address of the developer (if applicable) and landowner.
B. 
Name of the individual and/or the firm that prepared the plan.
C. 
Location map with sufficient information to enable the Commission to locate the property.
D. 
North arrow.
E. 
Written and graphic scales.
F. 
Existing tract boundaries accurately labeled with the name(s) of adjacent landowner(s) and adjacent plan(s) of record.
G. 
Name of the municipality or municipalities in which the project is located, including the location of any municipal boundary line(s) if located within the vicinity of the tract.
H. 
Significant topographical and man-made features (e.g., bodies of water, quarries, floodplains, tree masses, structures).
I. 
Proposed street, parking, building and lot layout.
J. 
Proposed land use; if several land uses are proposed, the location of each land use shall be indicated.
K. 
Statement explaining the methods of water supply and sewage disposal to be used.
Preliminary plans shall be prepared by an engineer or a surveyor. The preliminary plan shall show, be accompanied by or be prepared in accordance with the following and shall provide sufficient design information to demonstrate conformance with the requirements of Article VIII of this chapter.
A. 
Drafting standards.
(1) 
The plan shall be clearly and legibly drawn at a scale of 10 feet, 20 feet, 30 feet, 40 feet, 50 feet, 60 feet, 80 feet or 100 feet to the inch.
(2) 
Dimensions shall be in feet and decimals; bearings shall be in degrees, minutes and seconds. Lot line descriptions shall read in a clockwise direction.
(3) 
The survey shall not have an error of closure greater than one foot in 10,000 feet.
(4) 
The sheet size shall be no smaller than 18 inches by 22 inches and no larger than 24 inches by 36 inches. If the plan is prepared in two or more sections, a key map showing the location of the sections shall be placed on each sheet. If more than one sheet is necessary, each sheet shall be the same size and numbered to show the relationship to the total number of sheets in the plan (e.g., Sheet 1 of 5).
(5) 
Plans shall be legible in every detail.
B. 
Location and identification.
(1) 
The proposed project name or identifying title.
(2) 
The municipality in which the project is to be located. (If the tract of land is located in the vicinity of a municipal boundary line, the location of the boundary shall be shown.)
(3) 
The name and address of the owner of the tract (or an authorized agent), the developer/subdivider and the firm that prepared the plans.
(4) 
The file or project number assigned by the firm that prepared the plan, the plan date and the date(s) of all plan revisions.
(5) 
A North arrow, a graphic scale and a written scale.
(6) 
The entire existing tract boundary with bearings and distances. (If a landowner is to retain a single lot with a lot area in excess of 10 acres, the boundary of that lot may be identified as a deed plotting and may be drawn at any legible scale; if the remaining lot has a lot area of 10 or less acres, it must be described to the accuracy requirements of this chapter.)
(7) 
The total acreage of the entire existing tract.
(8) 
The district and lot size and/or density requirements of the Municipal Zoning Ordinance.[1]
[1]
Editor's Note: See Ch. 150, Zoning.
(9) 
The location of existing lot line markers along the perimeter of the entire existing tract.
(10) 
A location map, drawn to a scale of a minimum of one inch equal to 2,000 feet, relating the subdivision to at least two intersections of road center lines. The approximate distance to the intersection of the center lines of the nearest improved street intersection shall be identified.
(11) 
A note indicating the types of sewer or water facilities to be provided.
C. 
Existing features.
(1) 
Existing contours at a minimum vertical interval of two feet for land with average natural slope of 4% or less and at a minimum vertical interval of five feet for more steeply sloping land. Contours shall be accompanied by the location of the bench mark and notation indicating the datum used. Contours plotted from the United States Geodetic Survey shall be accepted.
(2) 
The names of all immediately adjacent landowners and the names and plan book record numbers of all previously recorded plans for adjacent projects.
(3) 
The following items when located within 200 feet of the subject tract:
(a) 
The location and name of existing rights-of-way and cartways for streets, access drives, driveways and service streets.
(b) 
The location of the following features and any related rights-of-way: sanitary sewer mains, water supply mains, fire hydrants, buildings and stormwater management facilities.
(c) 
The location of existing rights-of-way for electric, gas and oil transmission lines and railroads.
(d) 
The size, capacity and condition of the existing storm waste management system and any other facility that may be used to convey storm flows from the subject tract.
(4) 
The following items when located within the subject tract:
(a) 
The location, name and dimensions of existing rights-of-way and cartways for streets, access drives, driveways and service streets.
(b) 
The location and size of the following features and related rights-of-way: sanitary sewer mains, water supply mains, fire hydrants, buildings and stormwater management facilities.
(c) 
The location of existing rights-of-way for electric, gas and oil transmission lines and railroads.
(d) 
The size, capacity and condition of the existing stormwater management system and any other facility that may be used to convey storm flows.
(5) 
The following items when located within 200 feet of the subject tact or upon the site proposed for development: significant environmental or topographic features, including but not limited to floodplains, wetlands, quarry sites, solid waste disposal areas, historic features, cemetery or burial sites, archaeologic sites, highly erosive soils or wooded areas. Additionally, the preliminary plan shall indicate any proposed disturbance, encroachment or alteration to such features when located upon the site proposed for development.
D. 
Plan information.
(1) 
The layout of streets, alleys and sidewalks, including cartway and right-of-way widths.
(2) 
The layout of lots, with approximate dimensions.
(3) 
Block and lot numbers in consecutive order (e.g., Block A, Lots 1 through 10; Block B, Lots 11 through 22).
(4) 
In the case of land developments, the location and configuration of proposed buildings, parking compounds, streets, access drives, driveways and all other significant planned facilities.
(5) 
Total number of lots, units of occupancy, density and proposed land use (if a multiple land use is proposed, an indication of the location of each land use).
(6) 
Easements.
(7) 
Building setback lines, with distances from the street center line or street right-of-way line, whichever requirement is applicable under the Municipal Zoning Ordinance.[2]
[2]
Editor's Note: See Ch. 150, Zoning.
(8) 
Identification of buildings and historic features proposed to be demolished.
(9) 
Typical street cross section for each proposed street and typical cross section for any existing street which will be improved as part of the application. Each cross section shall include the entire right-of-way width.
(10) 
Street center line profile for each proposed street shown on the preliminary plan.
(11) 
The preliminary design of the proposed sanitary sewer mains and water supply mains. The information shall include the approximate size, material and vertical and horizontal location, when applicable.
(12) 
The following stormwater management data designed in accordance with § 137-31 of this chapter. The information may be provided on a sheet with other data or on separate sheets. In the case of any dispute in the methodology used in the design of any stormwater management plan and/or in the presentation of such information, the Commission shall make the final determination.
(a) 
All calculations, assumptions, criteria and references used in the design of the stormwater management facilities, the establishment of existing facilities capacities and the pre- and post-development discharges.
(b) 
All plans and profiles of the proposed stormwater management facilities, including the horizontal and vertical location, size and type of material.
(c) 
For all basins, a plotting or tabulation of the storage volumes and discharge curves with corresponding water surface elevations, inflow hydrography and outflow hydrography.
(d) 
The guidelines for lot grading within the subdivisions. This information shall identify the direction of stormwater runoff flow within each lot and the areas where stormwater runoff flows will be concentrated. This information shall be shown by flow arrows or topographical data (see Appendix 28[3] for examples).
[3]
Editor's Note: All Appendix material is on file in the borough offices.
(13) 
A statement on the plan indicating that all zoning approvals and all zoning variances have been obtained from the municipality, if applicable.
(14) 
A statement on the plan indicating any waivers granted by the Commission.
(15) 
Proposed street names.
(16) 
The current Tax Map parcel numbers for the tract to be developed.
E. 
Certificates, notifications and reports.
(1) 
Where the preliminary plan covers only a part of the entire landholding, a sketch of the future street system of the unsubmitted part shall be furnished. The street system of the submitted part will be considered in light of adjustments and connections with future streets in the part not submitted.
(2) 
Where the land included in the subject application has an electric transmission line, water transmission line, telecommunications line, a gas pipeline or a petroleum or petroleum products transmission line located within the tract, the application shall be accompanied by a letter from the owner or lessee of such right-of-way stating any conditions of the use of the land and the minimum building setback and/or right-of-way lines. This requirement may also be satisfied by submitting a copy of the recorded agreement.
(3) 
Certificate, signature and seal of the surveyor to the effect that the survey is correct and certificate, signature and seal of the surveyor, engineer or landscape architect that prepared the plan that all other information shown on the plan is accurate. (See Appendix 14.[4])
[4]
Editor's Note: All Appendix material is on file in the borough offices.
(4) 
(Optional) Certificate for approval by the Planning Commission. (See Appendix 17.[5])
[5]
Editor's Note: All Appendix material is on file in the borough offices.
(5) 
In the case of a preliminary plan calling for the phased installation of improvements, a schedule shall be filed delineating all proposed sections as well as deadlines within which applications for final plan approval of each section are intended to be filed. Each section in any residential subdivision or land development, except for the last section, shall contain a minimum of 25% of the total number of dwelling units as depicted on the preliminary plan unless the Commission specifically approves a lesser percentage for one or more of the sections.
(6) 
Where the subdivision or land development involves a site meeting any of the following criteria, a statement from the Cumberland or Franklin County Conservation District that an acceptable Erosion and Sedimentation Control Plan has been submitted to that agency:
(a) 
Sites where earth disturbance greater than five acres will occur.
(b) 
Sites where piping of stormwater or the alteration of natural or man-made watercourses occurs.
(c) 
Sites with slopes greater than 10%.
(d) 
Sites that contain or border a stream or body of water.
(e) 
Sites that offer the potential for sedimentation to nearby bodies of water.
(7) 
Where the subdivision or land development proposal will generate 100 or more additional trips to or from the site during the development's anticipated peak hour, a traffic impact study as required by this chapter shall be submitted with the preliminary plan.
(8) 
Where the land included in the subject application has an agricultural, woodland or other natural resource easement located within the tract, the application shall be accompanied by a letter from the party holding the easement stating any conditions on the use of the land. This requirement may be satisfied by submitting a copy of the recorded agreement.
(9) 
Where the developer intends to construct the improvements required by this chapter after unconditional preliminary plan approval, the applicant shall submit the appropriate executed Memorandum of Understanding (see Appendix No. 34[6]).
[6]
Editor's Note: All Appendix material is on file in the borough offices.
F. 
Filing fee. The preliminary plan shall be accompanied by a filing fee in the form of a check or money order drawn to the Borough of Shippensburg Treasurer. (See fee schedule available at the Commission's office). A separate filing fee must be submitted for each application. If one check is issued for multiple plans, a detailed breakdown of the individual fee assessments must accompany the payment. In addition to the required filing fees, the Commission and/or borough shall require the applicant to deposit with the borough an amount equal to the estimated costs for engineering, legal and administrative review of the plan.
Final plans shall be prepared by an engineer or a surveyor. The final plan shall show, be accompanied by or be prepared in accordance with the following and shall provide sufficient design information to demonstrate conformance with the requirements of Article VIII of this chapter.
A. 
Drafting standards. The same standards shall be required for a final plan as specified for a preliminary plan in § 137-16A of this chapter.
B. 
Location and identification. The same standards shall be required for a final plan as specified for a preliminary plan in § 137-16B of this chapter.
C. 
Existing features.
(1) 
Contour lines representing the topography of the site, if a preliminary plan was not required or the contours identified with the preliminary plan were altered. Such contours shall show elevations at a minimum vertical interval of two feet for land with average natural slope of 4% or less and at a minimum vertical interval of five feet for more steeply sloping land. Contour information shall be accompanied by the location of the bench mark and a notation indicating the datum used. Contours plotted from the United States Geodetic Survey will be accepted. This information may be provided on separate sheets and is not subject to recording with the final plan.
(2) 
The names of all immediately adjacent landowners and the names and plan book record numbers of all previously recorded plans for adjacent projects.
(3) 
Significant environmental and topographic features, including but not limited to floodplains, wetlands, quarry sites, solid waste disposal areas, historic features, cemetery or burial sites, archaeological sites, areas with highly erosive soils and woodlands. Additionally, the final plan shall indicate any proposed disturbance, encroachment or alteration to such features when located upon the site proposed for development.
(4) 
The following items when located within 200 feet of the subject tract:
(a) 
The approximate location and name of existing rights-of-way and cartways for streets, access drives and service streets.
(b) 
The approximate location of the following features and any related rights-of-way: sanitary sewer mains, water supply mains, fire hydrants and stormwater management facilities which affect the stormwater runoff on the subject tract.
(c) 
The size, capacity and condition of the existing stormwater management system and any other facility that may be used to convey storm flows from the subject tract.
(5) 
The following items when located within the subject tract:
(a) 
The location and size of the following features and related rights-of-way: on-lot sewage disposal systems, on-lot water supplies, sanitary sewer mains, water supply mains, fire hydrants, buildings and stormwater management facilities. This information may be provided on separate sheets and need not be recorded with the final plan.
(b) 
The location of existing rights-of-way for electric, telecommunications, gas and oil transmission lines and railroads.
(c) 
The size, capacity and condition of the existing stormwater management system and any other facility that may be used to convey storm flows.
D. 
Plan information:
(1) 
Complete description of the center line and the right-of-way line for all new streets. This description shall include distances and bearings with curve segments comprised of radius, tangent, arc and chord.
(2) 
Lot lines, with accurate bearings and distances and lot areas for all parcels. Curve segments shall be comprised of arc, chord, bearing and distance. Along existing street rights-of-way, the description may utilize the existing deed lines or road center lines; along all proposed street rights-of-way, the description shall be prepared to the right-of-way lines.
(3) 
Block and lot numbers in consecutive order (e.g., Block A, Lots 1 through 10; Block B, Lots 11 through 22).
(4) 
The location and configuration of proposed buildings, parking compounds, streets, access drives, driveways, landscaping and all other significant facilities.
(5) 
Total number of lots, units of occupancy, density and proposed land use (if a multiple land use is proposed, an indication of the location of each land use).
(6) 
Easements.
(7) 
Building setback lines, with distances from the street center line or street right-of-way line, whichever requirement is applicable under the Municipal Zoning Ordinance.[1]
[1]
Editor's Note: See Ch. 150, Zoning.
(8) 
Identification of buildings and historic features proposed to be demolished.
(9) 
Typical street cross section for each proposed street and a typical cross section for any existing street which will be improved as part of the application. Each cross section shall include the entire right-of-way width.
(10) 
Final vertical and horizontal alignment for each proposed street, sanitary sewer and water distribution main. All street profiles shall show at least the existing (natural) profile, along the center line, proposed grade at the center line and the length of all proposed vertical curves for streets. All water distribution and sanitary sewer systems shall provide manhole locations and size and type of material including fire hydrants, valves and pressure reducing valves. Easements for water, sewer and utilities shall be provided in such manner that perpendicular crossing of streets intended for dedication shall be avoided when possible. This information, except utility easements, may be provided on separate sheets and is not subject to recording with the final plan, except in the case of easements.
[Amended 8-5-1997 by Ord. No. 681, approved 8-5-1997]
(11) 
Source of title to the land included within the subject application, as shown by the books of the Cumberland or Franklin County Recorder of Deeds.
(12) 
Final street names.
(13) 
Location and material of all permanent monuments and lot line markers, including a note that all monuments and lot line markers are set or indicating when they will be set.
(14) 
A grading plan.
(a) 
The grading plan shall include finished land contours and grades, directions of water movement, type of soils, location of water bars or silt fences and ground floor elevations. This information may be provided on separate sheets and is not subject to recording with the final plan.
(b) 
The first floor elevation of the proposed structure, which shall be not less than 18 inches above the final elevation of the street, and the finished elevation of the lots shall be shown on the preliminary and final plans.
[Added 8-5-1997 by Ord. No. 681, approved 8-5-1997]
(15) 
Identification of any waivers granted by the Commission.
(16) 
Identification of any lands to be dedicated or reserved for public, semipublic or community use.
(17) 
The following stormwater management data for all plans designed in accordance with § 137-31 of this chapter. This information may be provided on a sheet with other data or on separate sheets and need not necessarily be recorded with the final plan. In the case of any dispute in the methodology used in the design of any stormwater management plan and/or in the presentation of such information, the Commission shall make the final determination on design criteria, methodology and form of presentation.
(a) 
All calculations, assumptions, criteria and references used in the design of the stormwater management facilities, the establishment of existing facilities capacities and the pre- and post-development peak discharges.
(b) 
All plans and profiles of the proposed stormwater management facilities, including the horizontal and vertical location, size and type of material. This information shall be to a detail required for the construction of the facilities.
(c) 
For all basins, a plotting or tabulation of the storage volumes and discharge curves with corresponding water surface elevations, inflow hydrography and outflow hydrography.
(d) 
For all basins which hold two acre feet or more of water and have an embankment that is six feet or more in height, soil structure and characteristics shall be provided. Plans and data shall be prepared by a registered professional engineer. These submissions shall provide design solutions for frost-heave potential, spring-swell potential, soil bearing strength, water infiltration, soil settling characteristics, fill and backfilling procedures and soil treatment techniques as required to protect the improvements for adjacent structures.
(e) 
All erosion and sedimentation control measures, temporary as well as permanent, including the staging of the earthmoving activities, in sufficient detail to clearly indicate their function.
(f) 
The guidelines for lot grading with subdivisions. This information shall identify the direction of stormwater runoff flow within each lot and the areas where stormwater runoff flows will be concentrated. This information shall be provided by flow arrows or topographic data (see Appendix 28[2] for examples). In areas where the Commission feels additional lot grading information is needed to assure proper function of the stormwater management facilities, specific grading information will be required as part of the final plan submittal.
[2]
Editor's Note: All Appendix material is on file in the borough offices.
(18) 
The location of driveways from the proposed street onto the lots created by the subdivision or land development.
[Added 8-5-1997 by Ord. No. 681, approved 8-5-1997]
(19) 
All utilities which are designed to cross a street or highway shall be installed in such a manner as to permit repairs and maintenance without the necessity of digging in the street or highway.
[Added 8-5-1997 by Ord. No. 681, approved 8-5-1997]
E. 
Certificates, notifications and reports.
(1) 
When applicable, notification from the Department of Environmental Resources that either approval of the Sewer Facility Plan Revision (Plan Revision Module for Land Development) or Supplement has been granted or that such approval is not required; if the final plan is conditionally approved pursuant to § 137-33, notification that the plan is subject to a pending Sewage Facilities Plan Revision Module and that approval shall be obtained prior to the sale of any lots or the commencement of construction.
(2) 
Where the land included in the subject application has an electric transmission line, a water transmission main, a gas pipeline, a telecommunication line or a petroleum or petroleum product transmission line located within the tract, the application shall be accompanied by a letter from the owner or lessee of such right-of-way stating any conditions on the use of the land and the minimum building setback and/or right-of-way lines. This requirement may also be satisfied by submitting a copy of the recorded agreement.
(3) 
Notice from the Postmaster of the postal district in which the tract is located stating that the proposed street names are acceptable.
(4) 
Certificate, signature and seal of the surveyor to the effect that the survey is correct and certificate, signature and seal of the surveyor, engineer or landscape architect that prepared the plan that all other information shown on the plat is accurate. (See Appendix 14.[3])
[3]
Editor's Note: All Appendix material is on file in the borough offices.
(5) 
Certificate for approval by the Planning Commission and Council of the Borough of Shippensburg. (See Appendix 19.[4])
[Added 8-5-1997 by Ord. No. 681, approved 8-5-1997]
[4]
Editor's Note: All Appendix material is on file in the borough offices.
(6) 
A statement, duly acknowledged before an officer authorized to take acknowledgment of deeds and signed by the landowner, to the effect that the subdivision or land development shown on the plan is the act and the deed of the owner, that all those signing are all the owners of the property shown on the survey and plan and that they desire the same to be recorded as such. (See Appendix 16.[5]) This statement must be dated following the last change or revision to said plan.
[5]
Editor's Note: All Appendix material is on file in the borough offices.
(7) 
A certificate of dedication of streets and other public property. (See Appendix 16.[6])
[6]
Editor's Note: All Appendix material is on file in the borough offices.
(8) 
Certificate of notification to be signed by municipal officials. (See Appendix 22.[7])
[7]
Editor's Note: All Appendix material is on file in the borough offices.
(9) 
A certificate to accommodate the Cumberland or Franklin County Recorder of Deeds information. (See Appendix 23.[8])
[8]
Editor's Note: All Appendix material is on file in the borough offices.
(10) 
A note to be placed on the plan indicating any area that is not to be offered for dedication, if applicable.
(11) 
An appropriately executed Memorandum of Understanding which sets forth the responsibilities of all parties regarding the installation and inspection of the required improvements. (See Appendix No. 34.[9])
[9]
Editor's Note: All Appendix material is on file in the borough offices.
(12) 
Such written notices of approval as required by this chapter, including written notices approving the water supply systems, sanitary sewage systems and stormwater runoff to adjacent properties. (See § 137-33 for specific requirements.)
(13) 
The submission of a controlling agreement in accordance with § 137-26T when an application proposes to establish a street which is not offered for dedication to public use.
(14) 
In the case of a plan which requires access to a highway under the jurisdiction of the Pennsylvania Department of Transportation, the inclusion of the following plan note:
"A Highway Occupancy Permit is required pursuant to Section 420 of the Act of June 1, 1945 (P.L. 1242, No. 428), known as the "State Highway Law," before driveway access to a state highway is permitted. Access to the state highway shall only be as authorized by a Highway Occupancy Permit, and the Planning Commission's approval of this plan in no way implies that such permit can be acquired."
(15) 
For all stormwater management facilities that affect an existing watercourse or have an upland drainage area greater than 1/2 square mile, notification from the Department of Environmental Resources of approval or that no approval is required.
(16) 
Where the subdivision involves a site meeting any of the following criteria, a statement from the Cumberland or Franklin County Conservation District that an acceptable Erosion and Sedimentation Control Plan has been submitted to that agency:
(a) 
Sites where earth disturbance greater than five acres will occur.
(b) 
Sites where piping of stormwater or the alteration of natural or man-made watercourses occurs.
(c) 
Sites with slopes greater than 10%.
(d) 
Sites that contain or border a stream or body of water.
(e) 
Sites that offer the potential for sedimentation to nearby bodies of water.
(17) 
Where the land included in the subject application has an agricultural woodland or other natural resource easement located within the tract, the application shall be accompanied by a letter from the party holding the easement stating any conditions on the use of the land. This requirement may be satisfied by submitting a copy of the recorded agreement.
F. 
Filing fee. The final plan shall be accompanied by a filing fee in the form of a check or money order drawn to the Borough of Shippensburg Treasurer. (See fee schedule available at the Commission's office). A separate filing fee must be submitted for each application. If one check is issued for multiple plans, a detailed breakdown of the individual fee assessments must accompany the payment. In addition to the required filing fees, the Commission and/or borough shall require the applicant to deposit with the borough an amount equal to the estimated costs for engineering, legal and administrative review of the plan.
Lot add-on plans shall be prepared by a registered surveyor and shall be subject to the following requirements:
A. 
Drafting standards.
(1) 
The plan shall be clearly and legibly drawn on eighteen-by-twenty-four-inch sheets.
(2) 
Dimensions shall be in degrees, minutes and seconds, with an error of closure no greater than one foot in 10,000 feet.
B. 
Plan information. The following information shall be provided on the sheet to be recorded:
(1) 
Project name.
(2) 
Name of the municipality in which the project is located.
(3) 
Name and address of the owner of the tract and all adjacent landowners affected by the proposed conveyance.
(4) 
Name and address of the firm that prepared the plan and the file or project number assigned by the firm.
(5) 
A North arrow, graphic scale, written scale, plan date and the date(s) of all plan revisions.
(6) 
A location map, at a scale not less than one inch equal to 2,000 feet, with sufficient information to locate the specific property involved. All existing roads in the vicinity of the site shall be identified.
(7) 
The total number of lots, total acreage, density of development, present zoning classification and minimum lot area requirements.
(8) 
The location, size and dimensions of existing right-of-way easements and utilities on or adjacent to both the conveying and receiving tracts.
(9) 
The names of all immediately adjacent landowners and the names and plan book record numbers of all previously recorded plans for projects adjacent to either the conveying or receiving tract.
(10) 
Source of title to the tract being subdivided.
(11) 
An accurate description of the parcel to be conveyed. If the remainder of the conveying tract has a lot area of 10 acres or less, it must also be described to the accuracy requirements of this chapter. If the remaining acreage is in excess of 10 acres, its boundary and the boundary of the receiving tract shall be described by deed plottings drawn at a legible scale.
(12) 
Location and material of all permanent monuments and lot line markers, including a note indicating when they will be set.
(13) 
Lot numbers.
(14) 
Identification of any waivers granted by the Commission.
C. 
Certificates.
(1) 
Certificate signature and seal of the surveyor to the effect that the survey is correct. (See Appendix 14.[1])
[1]
Editor's Note: All Appendix material is on file in the borough offices.
(2) 
Certificate for approval by this Commission. (See Appendix 20.[2])
[2]
Editor's Note: All Appendix material is on file in the borough offices.
(3) 
A statement, duly acknowledged before an officer authorized to take acknowledgment of deeds and signed by the landowner, to the effect that the subdivision as shown on the plan is the act and deed of the owner, that all those signing are all the owners of the property shown on the survey and plan and that they desire the same to be recorded as such. (See Appendix 16.[3])
[3]
Editor's Note: All Appendix material is on file in the borough offices.
(4) 
A statement, duly acknowledged before an officer authorized to take acknowledgment of deeds and signed by the owner of the receiving tract, to the effect that the conveyance as shown on the plan is in accordance with the intent of the landowner, that all those signing are all of the owners of the property shown on the plan and that they desire the same to be recorded as such. (See Appendix 16.[4])
[4]
Editor's Note: All Appendix material is on file in the borough offices.
(5) 
A certificate to accommodate the Cumberland or Franklin County Recorder of Deeds information. (See Appendix 23.[5])
[5]
Editor's Note: All Appendix material is on file in the borough offices.