[Amended 2-4-1985]
[Amended 5-15-1995; 4-29-1996 by Ord. No. 96-10; 5-16-2016 by Ord. No. 16-06;[1] 11-16-2020 by Ord. No. 20-23; 1-26-2026 by Ord. No. 26-01]
The following uses shall be permitted in I-1 Industrial Districts:
A. 
Permitted principal uses.
(1) 
Light manufacturing, processing, producing or fabricating operations which meet the performance standards for the zone, provided that all operations and activities, except parking, are conducted within enclosed buildings and that there is no outside storage of material, equipment or refuse.
(2) 
Experimental, research or testing laboratories, provided that no operation shall be conducted or equipment used which would create hazardous, noxious or offensive operations beyond the boundaries of the property involved.
(3) 
Administrative and general offices where no manufacturing is performed.
(4) 
Federal, state, county and municipal buildings and grounds.
(5) 
Warehouses and distribution centers.[2]
(6) 
Billboards, subject to the provisions of Article XXV, § 205-105I.
(7) 
Indoor recreation facilities.
(8) 
Medical offices, dental offices, and clinics.
(9) 
Adult day-care facilities.
(10) 
Pet day care and boarding facilities.
B. 
Required accessory uses.
(1) 
Off-street parking, subject to the provisions of Article XXIV of this chapter.
(2) 
Off-street loading, subject to the provisions of Article XXIV of this chapter.
C. 
Permitted accessory uses.
(1) 
Signs, subject to the provisions of Article XXV of this chapter.
(2) 
Fences, subject to the provisions of § 205-93 of this chapter.
(3) 
Other customary accessory uses and buildings which are clearly incidental to the principal use and building.
(4) 
Billboards, subject to the provisions of Article XXV, § 205-105I.
D. 
Conditional uses (subject to the provisions of Article XXIX of this chapter).
(1) 
Public utilities.
(2) 
Animal shelters, pounds, kennels.
[1]
Editor’s Note: This ordinance provided that it would take effect 7-1-2016.
Developments standards shall be as follows:
A. 
Minimum front yard setback: 100 feet from U.S. Route 1 and U.S. Route 130, and 60 feet from all other streets.
B. 
Where a proposed nonresidential development abuts a residential zone or a lot developed for residential uses, an additional thirty-foot buffer strip, designed in accordance with the requirements of Article XXVI, shall be added to any required rear or side yard which abuts said residential use.
C. 
Accessory buildings: same as specified in § 205-70.3C for planned office park development in the G-O Zone.
D. 
Other provisions: same as specified in § 205-70.3D for planned office park development in the G-O Zone.
E. 
Loading/unloading and truck idling restrictions: same as specified in § 205-68G for the C-2 General Commercial District.
[Added 7-6-1993]
Planned industrial park development may be permitted in the I-1 Zone, provided that the site to be developed shall contain a minimum of 10 acres.
A. 
Area, yard and building requirements shall be as follows:
(1) 
Minimum lot size: one acre.
(2) 
Minimum lot width: 200 feet.
(3) 
Minimum lot depth: 200 feet.
(4) 
Minimum side and rear yard setbacks. Minimum rear and side yard setbacks may be reduced proportionately to the individual reductions in lot area.
B. 
Other provisions. All other requirements for industrial development shall conform to those established under the I-1 District and other applicable requirements of this chapter.