A. 
Number of copies. At least seven copies of the sketch plat shall be delivered to the Planning Board.
B. 
Details required.
(1) 
The sketch shall be at a convenient scale of no more than 100 feet to the inch, shall be submitted on uniform size sheets not larger than thirty-six by forty-eight (36 x 48) inches and shall contain the date of preparation, approximate true North point, title "Sketch Plat" and a graphic scale. Where more than one sheet is required, a scaled map showing the entire subdivision on one sheet shall be prepared.
(2) 
The name and address of the owner or owners of the land to be subdivided, the name and address of the subdivider, if other than the owner, the name of the land surveyor or licensed professional engineer, if any, who proposed the sketch plat, the proposed name of the subdivision, the Town of Marlborough and Ulster County.
(3) 
A map of the location of the tract with respect to surrounding properties and major roads, such map to be at a scale of 2,000 feet to the inch. It shall identify all property in the vicinity of the subdivision held by the subdivider.
(4) 
All existing restrictions on the use of land, if any, including easements, covenants, zoning lines or street lines.
(5) 
Significant natural features, such as but not limited to watercourses, wetlands, steep slopes, rock outcroppings and unusual flora and fauna.
A. 
Number of copies. At least seven copies shall be delivered to the Planning Board.
B. 
Details required. The preliminary plat shall show or be accompanied by the following information, except where requirements have been waived through sketch plat review:
(1) 
All data required as in § 134-21B, except that drawings shall be clearly labeled "Preliminary Plat."
(2) 
The location, bearings and distances of the tract's boundaries, prepared by a licensed surveyor, including seal and number.
(3) 
Contours shall be indicated at intervals of two feet for slopes in excess of 10%.
(4) 
The names of all adjoining property owners of record and the names of adjacent developments.
(5) 
The location and dimensions of all public properties, street lines, easements, zoning boundaries or restrictions on the property.
(6) 
Location of existing and proposed sewers and water drains, including pipe size and type, grades, direction of flow and ownership. Calculations shall be provided when, in the opinion of the Town Engineer, these are necessary for review.
(7) 
The location, width and approximate grade of all proposed streets, with the approximate elevations shown at the beginning and end of each street, at street intersection and at all points where there is a decided change in slope or direction.
(8) 
The area of all land included in the subdivision and the approximate location, dimensions and area of all proposed or existing lots and land to be set aside for recreation and public purposes.
(9) 
Proposed provision of water supply, fire protection, sanitary waste disposal, stormwater drainage, wooded areas and easements.
(10) 
The location of all existing structures, such as buildings and stone walls, and all pertinent natural features that influence the design of the subdivision, such as watercourses and swamps.
(11) 
The location, dimensions and status of all covenants, deed restrictions or easements proposed by the applicants.
(12) 
Certification by subdivider's engineer that all improvements comply with requirements of the agencies having jurisdiction and will adequately meet the needs of the subdivisions.
(13) 
A completed environmental assessment form to allow the Planning Board to comply with the provisions of the State Environmental Quality Review Act under Article 8 of the Environmental Conservation Law and its implementing regulations as set forth in Chapter 89 of the Code of the Town of Marlborough.
(14) 
Where applicable due to proximity to or location in an agricultural district, an agricultural data statement.
A. 
General specifications. All subdivision plats shall be clearly drawn on linen with black, waterproof ink or, if originally drawn on paper using pencil, be reproduced by the applicant on a transparent, stable material suitable for reproduction, such as Mylar or Cronaflex. Such plat shall be at a convenient scale of no more than 100 feet to the inch and shall be submitted on uniform sheets not larger than thirty-six by forty-eight (36 x 48) inches. Where more than one sheet is required, a scaled map showing the entire subdivision on one sheet shall be submitted.
B. 
Copies required. The subdivider shall submit to the Planning Board two transparencies and three prints of the final subdivision plat. One transparency, which will be filed with the County Clerk, shall be as required in Subsection A above; the other, for the records of the Planning Board, may be a sepia copy.
C. 
Details required.
(1) 
Subdivision with four lots or fewer. For those subdivisions with four lots or fewer and meeting the other criteria in § 134-8B which permit the waiving of certain requirements of information:
(a) 
Name of subdivision, address and signature of the owner and subdivider, seal and number of the licensed professional engineer or land surveyor who prepared the plat and the names Town of Marlborough and Ulster County.
(b) 
An insert map of the location of the tract with respect to surrounding properties, roads and schools, at a scale of 2,000 feet to the inch.
(c) 
Date of preparation, graphic scale, approximate true North point, bearings and distances of tract's boundaries.
(d) 
The names of all adjoining property owners of record shall be indicated on the plat.
(e) 
The location and dimensions of all public properties, streets, easements, building lines or restrictions on the tract.
(f) 
The location of existing and proposed sewers, water mains, culverts and storm drains, including pipe size and type, grades, direction of flow and ownership.
(2) 
Subdivisions with more than four lots:
(a) 
Name of subdivision, name, address and signature of the owner and subdivider, seal and number of the licensed professional engineer or land surveyor who prepared the plat and the names Town of Marlborough and Ulster County.
(b) 
A map of the location of the tract with respect to surrounding properties, roads and schools, at a scale of 2,000 feet to the inch.
(c) 
Date of preparation, graphic scale, approximate true North point, bearings and distances of the tract's boundaries.
(d) 
The names of all adjoining property owners of record shall be indicated on the plat. Stamped envelopes, addressed to each of the owners of record of property abutting or across the street from the tract, shall be submitted to the Planning Board.
(e) 
The location and dimensions of all public properties, streets, easements, buildings lines or restrictions on the tract.
(f) 
The location of existing and proposed sewers, water mains, culverts and storm drains, including pipe size and type, grades, direction of flow and ownership.
(g) 
The location, width, grade and names of all proposed streets, with elevations shown at the beginning and end of each street, at street intersections and at all points where there is a decided change in slope or direction shown on the plat.
(h) 
Statement from subdivider's engineer, giving estimated cost of construction of roads and other improvements to meet the requirements of this chapter.
(i) 
Radii of all curves and lengths of arcs.
(j) 
Profiles showing existing and proposed elevations along the center lines of all streets. Where a proposed street intersects an existing street or streets, the elevation along the center line of the existing street or streets within 100 feet of the intersection shall be shown.
(k) 
Plans and profiles showing the location and a typical cross section of street pavements, including curbs and gutters, sidewalks, manholes and catch basins; the location, size and invert elevation of existing and proposed sanitary sewers, stormwater drains and fire hydrants; and the exact location and size of all water, gas or other underground utilities or structures.
(l) 
The area of the land included in the subdivision and the location, dimensions and area (in square feet) of all existing or proposed lots and land to be set aside for recreation or public purposes. All lots shall be numbered for identification.
(m) 
The location of all existing water bodies, swamps or streams that will be retained or relocated or intended to be developed. Existing buildings to be retained or removed shall be so identified.
(n) 
Sufficient data, acceptable to the Town Engineer, to readily determine the location, bearings and length of all lines and to reproduce such lines on the grounds.
(o) 
The location of existing and proposed monuments and markers.
(p) 
Offers of cession, in a form satisfactory to the Town Board, of all land offered or to be offered for dedication for streets, highways, easements, parks or other public facilities.
(q) 
Proposed covenants, deed restrictions and easements proposed by the applicant.
(r) 
The following notations shall be shown on the plat:
[1] 
Explanation of drainage easements as follows:
"The drainage easements (or the drainage discharge points) shown hereon establish the perpetual right to discharge stormwater runoff from the highway and from the surrounding area onto and over the affected premises by means of pipes, culverts or ditches, or a combination thereof, together with the right of the holder of fee title to the highway or his authorized representatives to enter said premises for purposes of making such installations and doing such maintenance work as said holder of fee title may deem necessary to adequately drain the highway and surrounding area."
[2] 
Explanation of sight easements as follows:
"The sight easements shown hereon establish the perpetual right of the holder of fee title of the highway or his authorized representatives to clear, regrade and maintain the area within these easements at such elevation that there is a clear line of sight anywhere across the area between an observer's eye at an elevation of 3.5 feet above the road surface at the newest edge of the road and an object one foot above the nearest edge of pavement on the intersecting road."
[3] 
Explanation of reservations as follows:
"Reserved for highway purposes (or recreation purposes or other approved purpose)."
[4] 
Endorsement of owner as follows:
"I hereby grant my approval to this plat and consent to the filing of it in the office of the County Clerk."
Owner
Date