The provisions for this district shall apply to all floodplains for which regional flood data, as defined in §
143-34, is not available or where regional flood data is available but floodways have not been delineated. As adequate regional flood data becomes available and floodways are delineated for portions of this district; such portions shall be designated in the Flood-Fringe District or Floodway District, as appropriate.
Once it is determined according to §
143-19 that a proposed use is located within a floodway, the provisions of Article
III shall apply. Once determined that the proposed use is located within the flood-fringe, the provisions of Article
IV shall apply. All provisions of the remainder of this chapter apply to either district.
Upon receiving an application for development
within the General Floodplain District, the Zoning Administrator shall:
A. Require the applicant to submit, at the time of application,
two copies of an aerial photograph, or a plan which accurately locates
the proposed development with respect to the General Floodplain District
limits, channel of stream, existing floodplain developments, together
with all pertinent information such as the nature of the proposal,
legal description of the property, fill limits and elevations, building
floor elevations and floodproofing measures.
B. Require the applicant to furnish any of the following
additional information as is deemed necessary by the Department for
evaluation of the effects of the proposal upon flood height and flood
flows, the regional flood elevation and, where applicable, to determine
the boundaries of the floodway:
(1) A typical valley cross section showing the channel
of the stream, the floodplain adjoining each side of the channel,
the cross-sectional area to be occupied by the proposed development,
and all historic high water information.
(2) Plan (surface view) showing elevations or contours
of the ground; pertinent structure, fill or storage elevations; size,
location and spatial arrangement of all proposed and existing structures
on the site; location and elevations of streets, water supply, and
sanitary facilities; soil types and other pertinent information.
(3) Profile showing the slope of the bottom of the channel
or flow line of the stream.
(4) Specifications for building construction and materials,
floodproofing, filling, dredging, channel improvement, storage of
materials, water supply and sanitary facilities.
C. Transmit one copy of the information described in Subsections
A and
B to the Department regional office, along with a written request for technical assistance to establish regional flood elevations and, where applicable, floodway data. Where the provisions of §
143-24B(3) apply, the applicant shall provide all required information and computations, to delineate floodway boundaries and the effects of the project on flood elevations.