Sketch design plan: The sketch design plan should be on a topographical survey map, may be a freehand drawing on a print of such a map and shall show the following information:
A. 
Existing and proposed street, highways and rights-of-way on and adjacent to the tract.
B. 
Existing topography.
C. 
Lot lines and subdivision boundary.
D. 
All public reservations such as for schools, parks, etc.
E. 
The sketch design plan shall be drawn at a scale of one inch equals 50 feet.
F. 
Number of acres in tract, acres in public use, average lot size, approximate number of lots, anticipated type of development.
G. 
Sketch vicinity map showing the relation of the subdivision to surrounding area and community.
H. 
Name and address of subdivider, name of municipality, title, scale, North arrow and date.
A. 
The preliminary plans shall show and be accompanied by the following information:
(1) 
Sheet size of 24 inches by 36 inches.
(2) 
Scale of one inch equals 50 feet for parcels of land up to 15 acres. Scale of one inch equals 100 feet for parcels of land in excess of 15 acres. Scale selected shall be indicated on the plan.
(3) 
Proposed subdivision name or identifying title.
(4) 
North point and date.
(5) 
All municipalities in which the subdivision is located.
(6) 
Name and address of the owner of the property or of his authorized agent or the subdivider.
(7) 
Name and seal of the registered engineer or registered surveyor responsible for the plan.
(8) 
Tract boundaries, with bearings and distances.
(9) 
Contours at vertical intervals of five feet or, in the case of relatively level tracts, at such lesser intervals as may be necessary for satisfactory study and planning of the tract.
(10) 
Datum to which contour elevations refer shall be United States Coast and Geodetic Survey datum.
(11) 
The location of existing streets in and adjacent to the tract (including names, right-of-way widths and cartway widths), highways, alleys and platted rights-of-way, buildings, water mains, fire hydrants, sewers, drain pipes, power and fuel transmission lines, culverts, easements, bridges, watercourses, railroad facilities, parks, playgrounds and other significant man-made features on the site and those on adjacent land.
(12) 
Names of all adjacent subdivisions and the names of the property owners of adjacent undivided tracts, the zoning classification, if any, of the land to be subdivided and of all the adjacent properties.
(13) 
All existing watercourses, tree masses, rock outcrops, springs, swampy areas and other significant natural features.
(14) 
All existing property lines, easements and rights-of-way and the purpose for which the easements or rights-of-way have been established.
(15) 
Location and width of all proposed streets, alleys, rights-of-way and easements, street names and approximate grade, proposed lot lines with approximate dimensions, proposed minimum building setback line for each street, playgrounds, public buildings, public areas and parcels of land proposed to be dedicated or reserved for public use.
(16) 
Clear sight triangles as required in § 158-42 of this chapter.
(17) 
The location of the soil absorption tests when such tests are required.
(18) 
Number of acres in the tract, acres in public use, number of lots, type of anticipated use, lineal feet in streets, minimum lot size.
(19) 
A location map, at a scale of 1,200 feet to the inch, showing the proposed development and adjoining areas.
B. 
Supporting data:
(1) 
Feasibility report on sewer and water facilities for the tract is required, as follows:
(a) 
The subdivider shall submit a feasibility report in duplicate concerning the availability and/or adaptability of water and sewer facilities in or near a proposed subdivision. Said report shall be prepared by a registered professional engineer and be submitted in conjunction with the preliminary plan for review and recommendations by the local office of the Pennsylvania Department of Environmental Protection.
(b) 
The feasibility report shall consist of an examination of possible connection to an existing sewerage system and water supply system. The study shall include the distance from the nearest public sewer and the capacity of the existing system to accommodate the proposed load.
(c) 
If connection to an existing sewerage system is not deemed feasible, the possibility of constructing a separate sewerage system and treatment works shall be investigated. This study shall include the location of treatment facilities, receiving stream, type and degree of treatment and design capacity.
(d) 
If either of the above methods of sewerage disposal are found to be feasible, formal application shall be made to the Commonwealth of Pennsylvania, Department of Environmental Protection and a permit obtained from the Sanitary Water Board prior to the construction of sewers or treatment facilities.
(e) 
The Planning Commission will approve on-lot individual subsurface sewage disposal systems only when the feasibility report indicates:
[1] 
Justification of the project necessitates consideration of this method.
[2] 
The soil absorption is satisfactory for this type of system.
[3] 
Such systems will not endanger groundwater supplies below the level of the absorption system.
[4] 
The systems will not be installed in creviced rocks or limestone formations.
(f) 
The soil absorption tests called for above shall be performed in accordance with the regulations of the Pennsylvania Sewage Facilities Act and shall be certified by a sanitarian of the Pennsylvania Department of Environmental Protection.
(2) 
Detailed drawings required:
(a) 
Streets. Typical cross-section and center-line profiles for each proposed street showing existing and proposed grades.
(b) 
Bridges and culverts. Preliminary engineering designs of any new bridges or culverts proposed in the tract.
(c) 
Stormwater drainage. A drawing of all present and proposed grades and facilities for stormwater drainage.
(3) 
In the event that the plans propose the enlargement of utility or other services extending from another municipality, a statement or certificate indicating that the proposal has been reviewed by the municipality or municipal authority concerned and is considered to be reasonable.
(4) 
Where the preliminary plan covers only a part of the subdivider's entire holding, a sketch shall be submitted of the prospective street layout for the remainder.
(5) 
A draft of deed restrictions and/or protective covenants for the subdivision.
(6) 
Offers of dedication and reservation.
(7) 
Letter from postmaster of area where subdivision is located, stating that the proposed subdivision street names do not duplicate names now in use.
A. 
Final plan. The following materials shall be submitted for approval of a final plan. Final plans shall conform in all important details with preliminary plans as previously approved, and any conditions specified in the approval of preliminary plans shall be incorporated in the final plans.
(1) 
Drawn on same sheet size and at same scale as the preliminary plan.
(2) 
The final plan site map shall be drawn on tracing cloth or be transparent reproduction with black line on cloth or stable plastic base film. If the final plan site map is drawn in two or more sections, they must be numbered consecutively and accompanied by a key map showing the location of the several sections.
(3) 
For all street rights-of-way and property lines within the subdivision, the following must be shown: accurate dimensions, bearings or deflection angles of all straight lines, error of closure may not exceed one foot in 10,000 for slopes of less than 10% or two feet in 10,000 for slopes of 10% and over and radii, arcs and central angles of all curves.
(4) 
For other rights-of-way and easements, the location, bearings, dimensions and purpose.
(5) 
Survey data shall include: primary control points or descriptions and ties to such control points to which all dimensions, angles, bearings and similar data on the map are referred.
(6) 
Number to identify each lot and/or site.
(7) 
Purpose for which sites other than residential lots are dedicated or reserved.
(8) 
Building setback lines on all lots and other sites.
(9) 
Names of record owners of adjoining unplatted land.
(10) 
Reference to recorded subdivision plans of adjoining subdivided land by record name, date and number.
(11) 
Notarized certification of title showing that applicant is the owner of the land, that the subdivision shown is his act and deed and that it will be recorded as shown.
(12) 
Certification by licensed surveyor or licensed engineer certifying to accuracy of survey and subdivision.
(13) 
The location of all proposed monuments and street signs and the location and methods of streetlighting facilities.
(14) 
A location map corrected and updated from the preliminary plan.
(15) 
Source of title.
(16) 
Provisions for review by the Jefferson Borough Planning Commission.
(17) 
Provisions for approval by the Jefferson Borough Council.
(18) 
Provisions for review by the York County Planning Commission.
B. 
Supporting data:
(1) 
Corrected and updated from the preliminary plan; all detailed drawings and specifications for improvements shall be submitted.
(2) 
Two copies of a center-line profile and cross-section maps or diagrams of streets showing proposed grades, curbs, sanitary and stormwater sewers, waterlines and any other underground utilities at a minimum scale of 40 feet horizontal and four feet vertical.
(3) 
Certificates required:
(a) 
From a registered professional engineer employed by the Borough Council: certification that the subdivider has installed all improvements to the specifications of these requirements and has complied with any conditions attached to the approval of the preliminary plan by the Planning Commission and/or the Borough Council or that the subdivider has posted bond or certified check in an amount sufficient to assure completion of all required improvements.
(b) 
From state agencies: certification that the method of sewage disposal and water supply have been approved by the Pennsylvania Department of Environmental Protection or the Borough Engineer.
(c) 
Other certificates as may be required:
[1] 
An agreement that the subdivider will install underground utilities before paving streets and constructing sidewalks.
[2] 
Protective covenants or private deed restrictions.
[3] 
Satisfactory arrangements made to guarantee construction of all improvements not completed.
[4] 
Filing fees and any other fee that may be required.