For the purposes of this article, the following words and phrases shall have the meanings respectively ascribed to them by this section:
Refuse which is capable of burning or being incinerated in whole or in part; excludes hazardous wastes as defined in this section and includes, but is not limited to, the following:
Paper and paper products, including tar paper and roofing material.
Cloth and clothing.
Wood and wood products.
Brush, shrubbery, lawn clippings and sod.
Street sweepings.
Rubber and rubber products, including automotive tires.
Plastic and plastic products.
Leather and leather products.
Drums, cans or other containers which have substantially been emptied of their contents.
Garbage, including all animal and vegetable waste, except the waste products of slaughterhouses, packing plants and fowl-processing plants.
A debris waste management processing or disposal site, including any and all contiguous land, structures and other appurtenances, and improvements thereon used for debris waste disposal and associated activities.
[Added 9-7-1988]
Inert solid waste such as brick or block, wood chips, tree stumps or brush.
[Added 9-7-1988]
A refuse disposal facility other than a sanitary landfill or incinerator; includes any parcel of land where refuse is accepted for deposit or permitted to be deposited without earth cover.
Those materials which, because of their inherent nature or quantities, require special handling during disposal to avoid creating environmental damage or hazards to public health or safety. "Hazardous waste" includes, but is not limited to, the following:
Petroleum.
Paints.
Plastics.
Explosives.
Acids.
Caustics.
Chemicals.
Poisons.
Drugs.
Radioactive materials.
Asbestos fibers.
Imported wool fibers.
Pathogenic wastes from hospitals, sanitoriums, nursing homes, clinics and veterinary hospitals.
Waste from slaughterhouses, poultry processing plants and the like.
Solvents.
A refuse disposal facility which uses a furnace or similar device to reduce the volume of refuse by burning, as part of the disposal process.
Inorganic refuse in a liquid or semiliquid state; excludes hazardous wastes as defined in this section and includes, but is not limited to, the following:
Sludge from automobile wash racks and steam cleaning products.
Mud and water from laundries.
Ceramic, pottery and glass wastes.
Sludge derived from the softening of water by the lime-soda process.
Paint sludge recovered from water circulated in paint spray booths.
Water containing lampblack and mud from floor washing.
Refuse which is incapable of burning or being incinerated; excludes hazardous wastes as defined in this section and includes, but is not limited to, the following:
Any site or operation used for the disposal of refuse from two or more residences or from any commercial or industrial operation, including sanitary landfills, incinerators, dumps and transfer stations.
A refuse disposal facility which uses a method of disposing of refuse on land without creating nuisances or hazards to public health or safety by utilizing the principles of engineering to confine the refuse to the smallest practical area, to reduce it to the smallest practical volume and to cover it with a layer of earth at the conclusion of each day's operation or at such more frequent intervals as may be necessary.
Garbage, refuse and other discarded solid materials, including solid waste materials resulting from industrial, commercial and agricultural operations and from community activities but not including solid or dissolved material in domestic sewage or other significant pollutants in water resources, such as silt, dissolved or suspended solids in industrial waste water effluents, dissolved materials in irrigation return flows or other common water pollutants.
An intermediate solid waste disposal facility in which solid waste collected from any source is temporarily deposited to await transportation to the final disposal site or facility.