The approving authority, when acting upon applications
for preliminary or minor subdivision approval or for preliminary or
minor site plan approval, shall have the power to grant such exceptions
from the requirements of subdivision approval or site plan approval,
as the case may be, as may be reasonable and within the general purpose
and intent of the provisions for subdivision/site plan review and
approval if the literal enforcement of one or more provisions of this
chapter is impracticable or will exact undue hardship because of peculiar
conditions pertaining to the land in question.
Site plan approval is required for all site
plans not defined herein as exempt.
The approving authority may waive required notices
and hearings for minor and exempt subdivisions and site plans, except
where a variance or conditional use is part of the application. Divisions
of land not considered a subdivision under the provisions of N.J.S.A.
40:55D-7 shall be exempt from compliance with the subdivision requirements
of this chapter.
The approving authority shall have the power
to act upon subdivisions, conditional uses or site plans simultaneously
without the developer making further application or the approving
authority holding further hearings. The longest time period for action
by the approving authority, whether it is for subdivision, conditional
use or site plan approval, shall apply. Whenever approval of a conditional
use is requested by the developer in conjunction with a site plan
or subdivision, notice of the hearing on the plat shall include reference
to the request for such conditional use.
In cases requiring site plan review and approval, applications for development shall be in accordance with the provisions of §
141-32 of this chapter and shall be accompanied by information and documentation specified in this section.
A. Preliminary site plan submission requirements. Site
plans submitted for conventional developments shall include materials
that clearly show conditions on the site at the time of the application,
the features of the site which are to be incorporated into the proposed
development and the appearance and function of the proposed development.
The various elements of the site plan shall be prepared by the professionals
as required in N.J.S.A. 13:40-7.1 licensed to practice in the State
of New Jersey according to the following instructions and including
the following information and data:
(1) Site plans shall be drawn to a scale of not less than
100 feet to the inch. All distances shall be in decimals of a foot,
and all bearings shall be given to the nearest tenth-second, and the
error of closure of the tract shall be one in 10,000 and certified
by a licensed land surveyor. Distances and bearings shall be on the
North American Datum of 1927 or North American Datum of 1983, as specified
by the Borough Engineer.
(2) Site plans shall be submitted on one of the following
standard sheet sizes: 15 inches by 21 inches or 24 inches by 36 inches.
If one sheet is not sufficient to contain the entire territory, one
composite map shall show the entire development with reference to
the sheets on which the various sections are shown.
(3) A key map showing the entire parcel to be developed
and its relation to the surrounding area, based on the Borough of
Collingswood Zoning Map.
(4) The title of the development, North arrow, scale,
name and address of the record owner as well as the applicant and
persons preparing the site development plan with their seal and signature
affixed to said plan.
(5) The name of the owners of record of all adjacent properties
and the block and lot numbers of such adjacent properties.
(6) All existing school, zoning and special district boundaries
located on or adjacent to the property involved. Such boundaries shall
be shown on the key map accompanying the detailed site plan.
(7) The boundaries of the property involved, building
or setback lines and lines of existing streets, lots, reservations,
easements and other areas dedicated to public use.
(8) The location of existing buildings and all other structures,
such as but not limited to signs, culverts, bridges (with spot elevations
of such structures), walls, fences, roadways and sidewalks.
(9) The size, height, location, arrangement and use of
all proposed areas, buildings, structures (including fences, roadways
and sidewalks) and special sites for individual uses, all including
proposed grades.
(10)
The location and design of any off-street parking
or loading areas, showing size and location of bays, aisleways, barriers,
pedestrian access, vehicular access and number of parking or loading
spaces.
(11)
All means of vehicle access and egress proposed
for the site, showing size and location of driveways and driveway
or curb openings to existing public streets. Shall include access
streets by name; acceleration and deceleration lanes; curbs; sight
triangles; traffic channelization; traffic signs; fire lanes; pedestrian
walks; bikeways; and sidewalks.
(12)
The location of all storm drainage pipes, structures
and watercourses, whether publicly or privately owned, with pipe sizes,
grades and direction of flow, whether existing or proposed, and also
whether above or below the ground surface. Final stormwater outfalls
in streams, swales, retention basins or other receiving bodies of
water shall be identified by coordinates based on the datum specified
above.
(13)
Existing and proposed topography with a contour
interval of one foot where slopes are 3% or less, two feet where slopes
are more than 3% but less than 15% and five feet where slopes are
greater than 15%, referenced to the National Geodetic Vertical Datum,
1929, and indicated by a dashed line. Where any regrading is proposed,
finished grade contours should be shown in solid lines.
(14)
The location of existing high points, depressions,
ponds, marshes, wooded areas and other significant existing natural
features.
(15)
An environmental impact statement.
(16)
A certified survey prepared by a land surveyor
licensed in the State of New Jersey shall accompany site plans and
shall show the boundaries of the parcel and the limits of all proposed
streets and other property to be dedicated to public use or to common
open space. In the case of new commercial, industrial or public buildings,
the site plan shall be accompanied by preliminary architectural floor
plans and elevations, with the name, address, professional number
and seal of the architect involved. In apartment, townhouse, or other
residential projects, the number of dwelling units, by type, shall
be shown.
(17)
All proposed street profiles and cross sections
shall be shown, indicating width of roadway, location and width of
sidewalks and location and size of utility lines according to standards
and specifications of the Borough. Such features are to be shown on
a separate map when necessary.
(18)
The location of all proposed utilities, including
but not limited to electrical, natural gas, telephone, cable, solid
waste disposal, sewer and water lines, valves, hydrants and other
appurtenances in conformance with applicable standards of the appropriate
Borough, county and state agencies.
(19)
The proposed positioning, direction, illumination, wattage and periods of operation of all proposed outdoor lighting to be used anywhere on the site or in connection with any proposed building or structure, including signs, thereon. Standards are outlined in §
141-71 of this chapter.
(20)
The location of all proposed signs, their size,
nature of construction, height and orientation, including all identification
signs, traffic and directional signs and freestanding and facade signs,
together with the nature and time control of sign lighting.
(21)
Proposed screening and landscaping, to include existing vegetation, buffer areas, screening devices or structures, seeded or sodded areas, ground covers, retaining walls and fencing as outlined in §§
141-54 and
141-69.
(22)
A copy of any covenants or deed restrictions
that are intended to cover all or any part of the tract.
(23)
An internal surface drainage plan designed to
produce no greater volume of surface runoff from the site subsequent
to development than that existing prior to development.
(24)
A written description of the proposed use(s)
of nonresidential buildings, including the number of employees; the
proposed number of shifts to be worked and the maximum number of employees
on each shift; expected truck and tractor-trailer traffic.
(25)
A listing of other required permits from agencies
having jurisdiction and the status of each permit required.
(26)
Such other information or data as may be required
by the Planning Board, as set forth in its rules of procedure, in
order to determine that the proposed development is in accord with
the Borough Master Plan and all applicable ordinances of the Borough.
B. Final submission requirements. Site plans shall be submitted for final approval in accordance with the provisions of §
141-32 of this chapter and shall contain or be accompanied by the following:
(1) Information and data contained in the submission for
preliminary approval. Final site plans shall be drawn to a scale of
not less than 50 feet to the inch.
(2) Any site plan revisions, additional data or revised
documentation required by the Planning Board in its resolution granting
preliminary approval.
(3) Offer of dedication of streets or other public ways
and deed for any public open space resulting from preliminary development
approval.
(4) Performance guaranties, approved by the Borough Solicitor
as to form and the Borough Engineer as to amount, sufficient to ensure
the satisfactory completion of improvements and facilities as required
by the resolution of the Planning Board granting preliminary approval.
The developer's engineer shall submit a detailed engineer's estimate
to review and approval by the Borough Engineer.
(5) A statement from the Borough Engineer that adequate
construction plans for all streets, drainage and other facilities
covered by the Borough's standards are adequate and comply with Borough's
standards.
(6) All approvals from other agencies having jurisdiction.