The purpose of these specifications is to establish the minimum acceptable
standards for sewers in streets in the Town of Warwick, County of Orange and
State of New York.
Complete technical specifications for the construction of sewers shall
accompany the plans. The specifications accompanying construction drawings
shall include, but not be limited to, all construction information not shown
on the drawings which is necessary to inform the builder in detail of the
design requirements for the quality of materials, workmanship and fabrication
of the project. It shall also include: allowable infiltration; construction
materials; special filter materials, such as stone, sand, gravel or slag;
miscellaneous appurtenances; instructions for testing materials and equipment
as necessary to meet design standards; and performance tests for the completed
works and component units.
Any deviation from approved plans or specifications affecting capacity,
flow or point of discharge shall be approved, in writing, before such changes
are made. Plans or specifications so revised should, therefore, be submitted
well in advance of any construction work which will be affected by such changes,
to permit sufficient time for review and approval. As-built plans clearly
showing such alterations shall be submitted to the Town Engineer at the completion
of the work.