The following is a list of acceptable manufacturers:
A. Restrained joint pipe:
(1) Push-on joint pipe:
(a)
American Pipe, Flex-Ring, or Lok-Ring.
(2) Rigid restrained mechanical joint pipe:
(a)
American Pipe, Flex-Ring, or Lok-Ring.
(3) Mechanical joint restraint system:
(a)
EBAA, Iron Inc., Megalug.
B. Gravity sewer line:
[Added 10-22-2015 by Res.
No. 15-10-003]
(1) PVC SDR 35 pipe:
(a)
JM Eagle (J-M Manufacturing Company, Inc.).
(b)
Charlotte Pipe and Foundry Company.
(c)
North American Pipe Corporation.
C. Low-pressure force main:
[Added 10-22-2015 by Res.
No. 15-10-003]
(1) High-density polyethylene (HDPE):
(a)
JM Eagle (J-M Manufacturing Company Inc.).
(b)
Georg Fischer Central Plastics.
E. Cross for inside drop manhole:
G. Mechanical joint couplings:
[Amended 10-22-2015 by Res. No. 15-10-003]
H. Utility warning tape:
[Amended 10-22-2015 by Res. No. 15-10-003]
(1) Reef Industries; Terra Tape Sentry Line Detectable.
I. Preformed butyl rubber sealing compound:
(2) Henry Sealant Division; Rub-R-Nek.
(3) Press-Seal Gasket Corp.; EX-Stik.
J. Grout, nonshrink, nonmetallic:
[Amended 10-22-2015 by Res. No. 15-10-003]
(2) Master Builders; Masterflow 713.
(3) U.S. Grout Corp.; Five Star.
L. Manhole frame and cover hold down bolts and inserts:
M. Manhole steps:
[Amended 10-22-2015 by Res. No. 15-10-003]
(1) Aluminum:
(a)
Neenah Foundry R-1982W Extruded.
N. Manhole insert:
(1) Parson Environmental Products, Inc.
O. Waterproofing coatings for concrete structures and manhole exteriors:
[Amended 10-22-2015 by Res. No. 15-10-003]
(1) Sherwin Williams Hi-Mil Sher-Tar Epoxy, 20 mils minimum thickness.
(2) Cooper Black No. 760 top Service Black, 20 mils minimum thickness.
P. Corrosion-resistant coating for manhole interior:
(1) Spray Wall from Sprayroq, Inc.
Q. Pipe opening seals for manholes:
[Amended 10-22-2015 by Res. No. 15-10-003]
(1) Press-Seal Gasket Corp: PSX Series.
(2) A-LOK Products: A LOK Manhole Pipe Seal.
S. Expandable sleeve and boot seals:
T. Thermoplastic manhole liner:
(1) A-Lok Products, Inc.; Dura Plate 100.
(2) Ameron Protective Linings; T-Lock PVC Liner.
U. Manhole protection post coating:
[Amended 10-22-2015 by Res. No. 15-10-003]
(1) Sherwin Williams DuraPlate 235 multipurpose epoxy.
V. Sewage air release valve:
(1) GA Industries, Inc. Figure 929-F.
(2) Val-Matic Valve & Manufacturing Corp.; Model 48
BWA.
W. Sewage air and vacuum valve:
(1) GA Industries, Inc. Figure 939-F.
(2) Val-Matic Valve & Manufacturing Corp.; Model 300
Series.
X. Sewage combination air valve:
(1) GA Industries, Inc. Figure 942-F.
(2) Val-Matic Valve & Manufacturing Corp.; Model 48
or 49/300 Series.
Y. Casing spacers and end seals:
(1) Advance Products and Systems, Inc.
Z. Individual grinder pumping stations:
[Amended 12-15-2011 by Res. No. 11-12-001]
AA. Service line check valve:
[Amended 10-22-2015 by Res. No. 15-10-003]
(1)
Clean Check, Inc.: Rectorseal Extendable backwater valves.
BB. Saddles (cast iron) for sewer laterals and service
lines:
CC. Saddles (PVC) for sewer laterals and service lines:
[Amended 10-22-2015 by Res. No. 15-10-003]
(1)
JM Eagle: J-M Manufacturing Company Inc.
DD. Flexible pipe couplings for sewer laterals and service
lines:
EE. Exterior grease interceptors:
[Added 10-22-2015 by Res.
No. 15-10-003]
FF. Tracer wire and accessories:
[Added 10-22-2015 by Res.
No. 15-10-003]
(1)
Copperhead Industries, LLC.