A. 
The sketch plan initially submitted to the Zoning Board of Appeals shall be based on Tax Map information or some other similarly accurate base map of a scale (preferably not less than 200 feet to the inch) to enable the entire tract to be shown on one sheet.
B. 
The sketch plan shall show the following information:
(1) 
The location of that portion which is to be subdivided in relation to the entire tract and the distance to the nearest existing street intersection.
(2) 
All roads, structures, wooded areas, streams, utilities and other physical features within the portion to be subdivided and within 100 feet thereof. If topographic conditions are significant, contours shall also be indicated at intervals of not more than 10 feet.
(3) 
The name of the owner and all adjoining property owners as disclosed by the most recent municipal tax records.
(4) 
The Tax Map sheet, block and lot numbers, if any.
(5) 
The proposed pattern of lots (including lot width and depth), street layout, recreation areas, systems of drainage, sewerage and water supply (see §§ 118-22 and 118-23 below) within the subdivided area.
(6) 
All existing restrictions on the use of land, including easements, covenants or zoning lines.
A. 
In the case of minor subdivision only, the subdivision plat application shall include the following information:
(1) 
A copy of such covenants or deed restrictions as are intended to cover all or part of the tract.
(2) 
An actual field survey of the boundary lines of the tract, giving complete descriptive data by bearings and distances, made and certified to by a licensed land surveyor. The corners of the tract shall also be located on the ground and marked by monuments, as approved by the Board of Trustees, and shall be referenced and shown on the plat.
(3) 
All on-site sanitation and water supply facilities shall be designed to meet the minimum specifications of the State Department of Health, and a note to this effect shall be stated on the plat and signed by a licensed engineer.
(4) 
The proposed subdivision name and the name of the Village and county in which it is located.
(5) 
The date, the North point, the map scale and the name and address of the record owner and subdivider.
B. 
The plat to be filed with the County Clerk shall be printed or drawn on linen or equivalent material or be clearly drawn in India ink upon tracing cloth. The size of the sheet shall conform to requirements of the County Clerk.
The following documents shall be submitted for conditional approval:
A. 
Five copies of the preliminary plat, prepared at a scale of not more than 100 feet to the inch but preferably not less than 50 feet to the inch, showing:
(1) 
The proposed subdivision name, the name of the Village and the county in which it is located, the date, the true North point, the scale and the name and address of the record owner, subdivider and engineer or surveyor, including license number and seal.
(2) 
The names of all subdivisions immediately adjacent and the names of the owners of record of all adjacent unsubdivided property.
(3) 
The zoning district, including exact boundary lines of the district if more than one district, and any proposed changes in the zoning district lines and/or the zoning text applicable to the area to be subdivided.
(4) 
All parcels of land proposed to be dedicated to public use and the conditions of such dedication.
(5) 
The location of existing property lines, easements, buildings, watercourses, marshes, rock outcrops, wooded areas, single trees with a diameter of eight inches or more as measured three feet above the base of the trunk and other significant existing features for the proposed subdivision and adjacent property.
(6) 
The location of existing sewers, water mains, culverts and drains on and adjacent to the property, with pipe sizes, grades and directions of flow.
(7) 
Contours with intervals of five feet or less, as required by the Board, including elevations on existing roads, and an approximate grading plan if natural contours are to be changed more than two feet.
(8) 
The width and location of any streets or public ways or places shown on the Official Map or the Master Plan within the area to be subdivided and the width, location, grades and streets profiles of all streets or public ways proposed by the developer.
(9) 
The approximate location and size of all proposed waterlines, valves, hydrants and sewer lines connected to existing lines or alternate means of water supply or sewage disposal and treatment, as provided in the Public Health Law.
(10) 
A storm drainage plan indicating the approximate location and size of proposed lines or channels.
(11) 
The proposed lot lines.
B. 
A stormwater pollution prevention plan (SWPPP) consistent with the requirements of the NYS SPDES General Permit for Construction Activities GP-01-02 and Chapter 114, Stormwater Management, shall be required for preliminary subdivision plat approval. The SWPPP shall meet the performance and design criteria and standards in Chapter 114. The approved preliminary subdivision plat shall be consistent with the provisions of Chapter 114.
[Added 11-5-2007 by L.L. No. 4-2007[1]]
[1]
Editor's Note: This local law also redesignated former Subsections B and C as Subsections C and D.
C. 
If the application covers only a part of the subdivider's entire holding, a map of the entire tract, drawn at a scale of not less than 400 feet to the inch, showing an outline of the platted area with its proposed streets and an indication of the probable future street system with its grades and drainage in the remaining portion of the tract and the probable future drainage layout of the entire tract shall be submitted. The part of the subdivider's entire holdings submitted shall be considered in the light of the entire holdings.
D. 
A copy of such covenants or deed restrictions as are intended to cover all or part of the tract.
The following documents shall be submitted for plat approval:
A. 
The final plat. The plat to be filed with the County Clerk shall be printed upon linen or equivalent or be clearly drawn in India ink upon tracing cloth. The size of the sheets shall conform to Village standards. The plat shall be drawn at a scale of no more than 100 feet to the inch and oriented with the North point at the top of the map. When more than one sheet is required, a key map or an additional index sheet of the same size shall be filed, showing to scale the entire subdivision with lot and block numbers clearly legible. The plat shall show:
(1) 
The proposed subdivision name or identifying title and the name of the Village and county in which the subdivision is located, the name and address of the record owner and subdivider and the name, license number and seal of the licensed land surveyor.
(2) 
Street lines, pedestrianways, lots, reservations, easements and areas to be dedicated to public use.
(3) 
Sufficient data acceptable to the Village Engineer to determine readily the location, bearing and length of every street line, lot line and boundary line and to reproduce such lines upon the ground. Where applicable, these should be referenced to monuments included in the State System of Plane Coordinates and in any event should be tied to reference points previously established by a public authority.
(4) 
The length and bearing of all straight lines, radii, length of curves and central angles of all curves and tangent bearings for each street. All dimensions and angles of the lines of each lot shall also be given. All dimensions shall be shown in feet and inches. The plat shall show the boundaries of the property, the location, the graphic scale and the true North point.
(5) 
By proper designation thereon, all public open spaces for which deeds are included and those spaces title to which is reserved by the developer. For any of the latter, there shall be submitted with the subdivision plat copies of agreements or other documents showing the manner in which such areas are to be used and maintained and the provisions made therefor.
(6) 
All offers of cession and covenants governing the maintenance of unceded open space shall bear the certificate of approval of the Village Attorney as to their legal sufficiency.
(7) 
Lots and blocks within a subdivision shall be numbered and lettered in alphabetical order to accordance with the prevailing Village practice.
(8) 
Permanent reference monuments shall be shown and shall be constructed in accordance with specifications of the Board of Trustees. When referenced to the State System of Plane Coordinates, they shall also conform to the requirements of the State Department of Transportation. They shall be placed as required by the Board of Trustees and their location noted and referenced upon the plat.
(9) 
All lot corner markers shall be at least 3/4 inch (if metal) in diameter and at least 24 inches in length and permanently located in the ground to existing grade in a manner satisfactory to the Board of Trustees.
(10) 
Monuments of a type approved by the Board of Trustees shall be set at all corners and angle points of the boundaries of the original tract to be subdivided and at all street intersections, angle points in street lines, points of curve and such intermediate points as shall be required by the Village Engineer.
B. 
Construction drawings include plans, profiles and typical cross sections, as required, showing the proposed location, size and type of streets, sidewalks, streetlighting standards, street trees, curbs, water mains, sanitary sewers and storm drains, pavements and subbase, manholes, catch basins and other facilities. As-built drawings shall also be filed with the Board of Trustees and Zoning Board of Appeals if the construction has deviated significantly from the plans approved by the Boards.
C. 
A stormwater pollution prevention plan (SWPPP) consistent with the requirements of the NYS SPDES General Permit for Construction Activities GP-01-02 and Chapter 114, Stormwater Management, shall be required for preliminary subdivision plat approval. The SWPPP shall meet the performance and design criteria and standards in Chapter 114. The approved preliminary subdivision plat shall be consistent with the provisions of Chapter 114.
[Added 11-5-2007 by L.L. No. 4-2007]