The Borough of Medford Lakes finds that reducing the amount
of solid waste and conservation of recyclable materials is an important
public concern and is necessary to implement the requirements of the
SWMA and the county plan. The recycling of certain materials from
the residential, commercial and institutional establishments in this
municipality will conserve existing landfill capacity, facilitate
the implementation and operation of other forms of resource recovery,
and conserve natural resources through reduced energy consumption,
reduced water and air pollution as well as reduce the demand on raw
material extraction.
This chapter is adopted pursuant to P.L. 1987, c. 102 (effective April 20, 1987), N.J.S.A. 40:48-2, N.J.S.A.
40:66-1 and N.J.S.A. 40:49-2.1, and any amendments adopted thereto.
As used in this chapter, the following definitions shall apply:
ACT or SWMA
The Solid Waste Management Act, N.J.S.A. 13:1E-1 et seq.,
as amended and supplemented.
ALUMINUM CAN
Empty food and beverage containers comprised of aluminum.
Excluded from this definition are aluminum aerosol cans, aluminum
foil and trays.
ANTIFREEZE
Liquid used in a cooling system that is mixed with water
and prevents the water from freezing. The solution serves as the engine
coolant.
BURLINGTON COUNTY REGIONAL PROGRAM
The program utilized for the collection of those recyclable
materials as designated by the Department of Solid Waste from residential
curbside and participating school collection programs.
CERTIFIED RECYCLING COORDINATOR
A person who shall have completed the requirements of a course
of instruction in various aspects of recycling program management,
as determined and administered by the Department of Environmental
Protection.
CLASS A RECYCLABLE MATERIAL
Source-separated, nonputrescible, metal, glass and plastic
bottles coded No. 1 and No. 2, and paper and corrugated and other
cardboard.
CLASS B RECYCLABLE MATERIAL
Source-separated, nonputrescible waste concrete, asphalt,
brick, block, asphalt-based roofing, scrap and wood waste; source-separated,
nonputrescible waste materials other than metal, glass, paper, plastic
containers, corrugated and other cardboard resulting from construction,
remodeling, repair and demolition operations on houses, commercial
buildings, pavements and other structures; source-separated whole
trees, tree trunks, tree parts, tree stumps, brush and leaves, provided
that they are not composted; source-separated scrap tires; and source-separated
petroleum contaminated soils.
CLASS C RECYCLABLE MATERIALS
Source-separated compostable or anaerobically digestible
material such as source-separated food waste, biodegradable plastic
and yard trimmings.
CLASS D RECYCLABLE MATERIAL
Used oil, antifreeze, latex paints, thermostats, fluorescent
lamps (light bulbs), oil-based finishes, batteries, mercury-containing
devices and consumer electronics.
COMMERCIAL ESTABLISHMENT
All commercial and industrial activities that operate for
profit and are involved in retail or manufacture of goods and services
provided for sale.
CO-MINGLED
A combining of source-separated recyclable materials for
the purpose of recycling.
CONSUMER ELECTRONICS
Computer equipment, including desktop and laptop computers
and related components, including, monitors, circuit boards, terminals,
and CPU's, and peripheral equipment, including keyboards, printers,
copiers and fax machines. It shall also include VCRs, CD players,
DVD players, and cellular phones. Consumer electronics shall not include
televisions, as defined herein, until such time as such devices are
banned at solid waste disposal facilities in accordance with the Electronics
Waste Recycling Act, P.L 2008, c.130 et seq., and any amendments thereto.
CONTAMINANT
Solid waste, food waste, or other material which adheres
to, or which is otherwise contained on or in, source-separated recyclable
materials.
CORRUGATED AND OTHER CARDBOARD
All corrugated cardboard normally used for packing, mailing,
shipping or containerizing goods, merchandise or other material, but
excluding plastic, foam, foil or wax-coated or soiled corrugated cardboard.
COUNTY
The Burlington County Board of Chosen Freeholders, and its
successors and assigns, acting through the Burlington County Division
of Solid Waste Management.
CURBSIDE DESIGNATED RECYCLABLES
Those designated recyclables that are placed for collection
within the parameters of the curbside collection program as outlined
herein.
CURBSIDE RECYCLING CONTAINER
A container(s) provided by the municipality or persons for
the temporary storage of recyclable materials within the residential
unit(s).
DESIGNATED RECYCLABLE MATERIALS
Those recyclable materials to be source-separated in this
municipality, including but not limited to aluminum cans, antifreeze,
consumer electronics, corrugated cardboard, fluorescent lights, glass
containers, lead acid batteries, leaves, metal appliances, paper,
plastic bottles (coded No. 1 and No. 2), rechargeable batteries, steel
(tin) cans, textiles, tires and used motor oil.
DISPOSITION or DISPOSITION OF DESIGNATED RECYCLABLE MATERIALS
The transportation, placement, reuse, sale, donation, transfer
or temporary storage for a period not exceeding six months, or for
a period of time as mandated by law, of designated recyclable materials
for all possible uses except for disposal as solid waste.
DSW
The Burlington County Department of Solid Waste, its successors
and assigns.
FIBER
All newspaper, fine paper, bond paper, junk mail, office
paper, magazines, paperback books, school paper, catalogs, computer
paper, telephone books, chipboard, corrugated and other cardboard
and similar cellulosic material whether shredded or whole, but excluding
wax paper, plastic or foil-coated paper, thermal fax paper, carbon
paper, blueprint paper, food-contaminated paper, soiled paper and
cardboard.
FLUORESCENT LIGHTS
A lighting system which works by creating electric arcs inside
a gas-rich tube to produce ultraviolet light, then converting this
to visible fluorescent light by its passage through a layer of phosphor
on the inside of the glass.
GENERATOR
Any person(s) who causes solid waste to be produced for any
purpose whatsoever.
GLASS
All clear (flint), green, and brown (amber) colored glass
containers. Glass shall not include crystal, ceramics, light bulbs,
plate, window, laminated, wired or mirrored glass.
INK JET CARTRIDGE
A replaceable unit that holds ink and the print nozzles for
inkjet printers.
INSTITUTIONAL ESTABLISHMENT
shall mean any entity, either public or private, either for
profit or nonprofit, who operates for educational, charitable, religious,
fraternal or other public purpose.
LEAD ACID BATTERY
Storage batteries with lead electrodes and that contain dilute
sulfuric acid as the electrolyte. These include starting batteries,
such as vehicle batteries, marine batteries, small sealed lead acids
and deep cell batteries used to power vehicles or marine accessories
such as trolling motors, winches or lights.
LEAVES
Vegetative material, typically generated in the autumn, which
falls from trees and is collected for removal from a property.
METAL APPLIANCES
Appliances composed predominantly of metal, including stoves,
washing machines, dryers and water heaters. Also included are all
Freon®-containing appliances, including air conditioners, freezers,
refrigerators and dehumidifiers.
MUNICIPALITY
The Borough of Medford Lakes located within the County of
Burlington, State of New Jersey.
MUNICIPAL RECYCLING DEPOT
A site owned and operated by a municipality for the receipt
and temporary storage of certain designated Class A recyclable materials
delivered by residents, small commercial and nonprofit establishments
for a period not exceeding two months, prior to their transport to
a recycling center or end market.
MUNICIPAL SOLID WASTE
Residential, commercial and institutional solid waste generated
within a community.
MUNICIPAL SOLID WASTE STREAM
Residential, commercial and institutional waste in the context
of the Statewide Solid Waste Management Plan Update, which constitutes
the waste stream, used to calculate the state-mandated fifty-percent
recycling rate. This waste stream includes waste types 10 and 23.
PAPER
All newspaper, fine paper, bond paper, junk mail, office
paper, magazines, paperback books, school paper, catalogs, computer
paper, telephone books and similar cellulosic material, whether shredded
or whole, but excluding tissue and towel paper, wax paper, plastic
or foil-coated paper, thermal fax paper, carbon paper, NCR paper,
blueprint paper, food-contaminated or soiled paper.
PERSON
Any individual, firm, partnership, corporation, association,
cooperative enterprise, trust, municipal authority, federal institution
or agency, state institution or agency, municipality, other governmental
agency or any other entity or any group of such persons which is recognized
by law as the subject of rights and duties.
PLASTIC BOTTLES
All bottles that are labeled as made from polyethylene terapthalate
(PET) and coded as No. 1 and high-density polyethylene terapthalate
(HDPE) and coded as No. 2. Specifically excluded are bottles that
formerly contained hazardous materials, including but not limited
to paint, solvents, motor oil and pesticides and herbicides.
PUTRESCIBLE WASTE
Organic material which is capable of, and prone to, a rapid
process of biological and biochemical decomposition under anaerobic
or aerobic conditions, resulting in the formation of malodorous byproducts.
RECHARGEABLE BATTERIES
Batteries used in portable electronic devices composed of
nickel cadmium (Ni-Cd), nickel metal hydride (Ni-MH), lithium ion
(Li-ion) and small sealed lead (Pb).
RECYCLABLE MATERIALS
Materials that would otherwise become solid waste that can
be separated, collected and/or processed and returned to the economic
mainstream in the form of raw materials or products.
RECYCLING
Any process by which materials which would otherwise become
solid waste are collected, separated or processed and returned to
the economic mainstream in the form of raw materials or products.
RECYCLING CENTER
A facility designed and operated solely for receiving, storing,
processing or transferring source-separated recyclable material (Class
A, Class B, Class C and/or Class D recyclable materials).
RESIDENT
Any person residing within the municipality on a temporary
or permanent basis, but excluding persons residing in hotels or motels.
SCRAP METAL
Bits and pieces of metal parts (for example, bars, turnings,
rods, sheets, wire) or metal pieces that may be combined together
with bolts or soldering (for example, radiators, scrap automobiles,
railroad box cars) which, when worn or superfluous, can be recycled.
Included are all ferrous and nonferrous metals, including appliances
and appliances containing refrigerants.
SOLID WASTE
Garbage, refuse and other discarded materials, as defined
in N.J.S.A. 13:1E-1 et seq. and N.J.S.A. 48:13A-1, et seq.
SWMA
The New Jersey Solid Waste Management Act, as amended.
SOURCE-SEPARATED
Recyclable materials separated from the solid waste stream
at the point of generation.
STEEL CAN
Empty food, beverage and aerosol containers comprised of
tin, steel or a combination thereof, which formerly contained only
nonhazardous substances or such other substances as have been approved
for recycling by the Department of Solid Waste.
TELEVISION
A stand-alone display system containing a cathode ray tube
or any other type of display primarily intended to receive video programming
via broadcast, having a viewable area greater than four inches measured
diagonally, able to adhere to standard consumer video formats and
having the capability of selecting different broadcast channels and
support sound capability.
TEXTILES
Clean dry clothing or other fabric measuring at least one
foot by one foot in size. It shall not include material that is wet
or mildewed.
TIRES
Rubber wheels used on motorized transport or equipment whether
bias-ply, cross-ply or radial.
TONER CARTRIDGE
An exhausted replaceable cartridge containing toner powder
and sometimes the photosensitive drum on which a laser printer generates
the image to be printed.
TYPE 10 MUNICIPAL SOLID WASTE
Waste originating in the community, consisting of household
waste from private residences, commercial waste which originates in
wholesale, retail or service establishments such as restaurants, stores,
markets, theaters, hotels and warehouses, and institutional waste
material originated in schools, hospitals, research institutions and
public buildings.
TYPE 13 BULKY WASTE
Large items of waste material, such as appliances and furniture.
Discarded automobiles, boats, trucks and trailers and large vehicle
parts and tires are included under this category.
USED OIL
Any oil that has been refined from crude oil or any synthetic
oil that has been used and, as a result of such use, is contaminated
by physical or chemical impurities, or unused oil that is contaminated
by physical or chemical impurities through storage or handling and
is determined to be a solid waste by the generator.
USED OIL COLLECTION CENTER
The municipal recycling center that manages used oil and
accepts and/or aggregates and stores used oil collected from used
oil generators regulated under N.J.A.C. 7:26A-6.4 that bring used
oil to the collection center in shipments of no more than 55 gallons
pursuant to N.J.A.C. 7:26A-6.4(e). Used oil accumulation centers may
also accept used oil from household "do-it-yourselfer" used oil generators.
Notwithstanding the limitations to the Burlington County Regional
Program (BCRP) or the Municipal Recycling Depot, as outlined within
this chapter, every person is required to source-separate and recycle
each of the designated recyclable materials outlined within this chapter.
All recyclables placed for collection pursuant to the curbside program established within §
201-15 of this chapter shall be source-separated and prepared for collection in accordance with the following conditions:
A. Cardboard and paper shall be set out in carts provided by this municipality.
(1) Boxes shall be flattened as to fit into the cart.
(2) Where cardboard boxes are too large to be placed in the cart and
where there are too many boxes to fit within the cart, cardboard boxes
must be flattened and placed alongside the cart for collection.
(3) Carts shall be placed at the curb with the lid opening facing the
street.
(4) Carts shall be placed in such a manner so as to leave at least two
feet of clear space around each side of the cart.
(5) Carts shall be placed in such a manner so as to avoid interference
from overhead obstructions.
(6) Carts shall be maintained in a neat and sanitary condition so as
to deter vermin and odors.
(7) Carts are the property of the municipality and may not be used for
any other purpose or to contain any other material.
B. Glass containers, aluminum cans, steel cans and plastic bottles:
(1) Remove all caps and lids and dispose of as solid waste.
(2) Glass containers, aluminum cans, steel cans and plastic bottles shall
be rinsed free of contaminants.
(3) Glass containers, aluminum cans, steel cans and plastic bottles shall
be placed in a recycling container provided by the municipality.
(4) Plastic and/or paper garbage bags shall not be utilized as containers
for glass containers, aluminum cans, steel cans and plastic bottles.
C. Municipally provided recycling carts/containers may not be used for
any other purpose whatsoever.
D. Removal of recycling carts/containers provided by the municipality
by any person is prohibited.
E. Recyclables shall not be placed for collection earlier than the evening
of the day preceding a scheduled collection day. Recyclables must
be placed at the roadside by 6:00 a.m. on the scheduled collection
day.
F. All other terms and phrases shall be as defined in the SWMA and regulations
promulgated thereunder and the county plan, unless content clearly
requires a different meaning.
All persons generating municipal solid waste within this municipality
through the operation of a commercial or institutional establishment
shall source-separate and arrange for collection of all designated
recyclables within 30 days of the effective date of this chapter.
A. Designated recyclable materials for the mandatory commercial and
institutional source-separation program shall consist of the following
materials:
|
Aluminum cans
|
|
Antifreeze
|
|
Consumer electronics
|
|
Corrugated cardboard
|
|
Fluorescent lights
|
|
Glass containers
|
|
Lead acid batteries
|
|
Leaves
|
|
Metal appliances
|
|
Paper
|
|
Plastic bottles (coded 1 and 2)
|
|
Rechargeable batteries
|
|
Steel (tin) cans
|
|
Textiles
|
|
Tires
|
|
Used motor oil
|
|
Ink jet cartridge
|
|
Toner cartridge
|
|
Other recyclable materials as designated by the municipality
|
B. The owner or manager of each and every commercial and institutional source shall be required to report recycling tonnages as described in §
201-20.
C. The arrangement for collection of designated recyclables for disposition
hereunder shall be the responsibility of the individual(s) responsible
for the provision of solid waste or recycling services, including
the provision or maintenance of litter receptacles located on the
property of any commercial or institutional establishment generating
designated recyclables.
Pursuant to N.J.A.C. 7:26A-10.3, all commercial and institutional
property owners or their agents shall report the tonnage of designated
recyclable materials collected for recycling from their business or
premises, as follows:
A. The management individual(s) responsible for the provision of recycling
services, as herein defined, at all residential, commercial, institutional
and industrial properties that contract for recycling services with
a private company shall submit to the Municipal Recycling Coordinator,
by the first day of February of each year, documentation verifying
the previous year's total recycling (expressed by weight) for
each material recycled.
B. Documentation shall take the form of a letter or report issued by
the recycling service provider or end market to the generator of the
recycled material. The generator must maintain weight slips or paid
invoices and make such records available for inspection by this municipality,
county or state for a period not to exceed five years.
C. Any solid waste or recycling service provider shall submit to the
Municipal Recycling Coordinator, by the First Day of February of each
year, documentation verifying the previous year's total recycling
(expressed by weight) for each material recycled as prescribed by
the DSW.
D. At a minimum, all reporting shall detail the municipality of origin,
the name and location of the market or recycling center and the amount
of each source-separated recyclable material, expressed in gallons,
tons or cubic yards, brought to each manufacturer or recycling center
from the municipality of origin. Those persons specifying this information
in cubic yards shall also indicate the conversion ratio utilized for
calculating the materials from cubic yards to tons.
In addition to any other remedy provided in this chapter, the municipality may institute a suit in equity where unlawful conduct or public nuisance exists, as defined in this chapter, for an injunction to restrain a violation of this chapter or the county plan. In addition to an injunction, the court may impose penalties as authorized by §
201-25 hereof. The penalties and remedies prescribed by this chapter shall be deemed concurrent. The existence, exercise or any remedy shall not prevent the municipality or the county from exercising any other remedy provided by this chapter or otherwise provided by law or equity.
The terms and provisions of this chapter are to be liberally
construed so as best to achieve and to effectuate the goals and purposes
hereof. This chapter shall be construed in pari materi with the SWMA
and the county plan.