For the purpose of this chapter, the Town is hereby divided
into the following zones:
R-30A
|
High Density Residential A
|
R-30B
|
High Density Residential B
|
R-30C
|
High Density Residential C
|
R-40
|
Low Density Residential
|
OC
|
Open Space and Conservation
|
AG
|
Agriculture
|
CB-R
|
Commercial/Residential
|
CB
|
Commercial
|
I-1
|
Industrial
|
I-2
|
Highway Industrial
|
I-3
|
Industrial/Commerce
|
PD
|
Planned Development
|
The zones are shown, defined and bounded on the Zoning Map accompanying
this chapter entitled "Zoning Map," dated April 25, 2013. The Zoning
Map is hereby made a part of this chapter and shall be on file in
the office of the Town Clerk.
Where uncertainty exists with respect to the boundaries of the
various zones, as shown on the Zoning Map, the following rules shall
apply:
A. Where the designation on the Zoning Map indicates a boundary approximately
upon a road, the center line of the road shall be construed to be
the boundary.
B. Where the designation on the Zoning Map indicates a boundary approximately
upon a lot line, such lot line shall be construed to be the boundary.
C. Distances shown on the Zoning Map are perpendicular distances from
road center lines measured to the zone boundary. In all cases where
distances are given, zone boundaries are parallel to the road center
line.
D. In other cases the zone boundary shall be determined by the use of
the scale on the Zoning Map.
Where a zone boundary divides a lot of record at the time such
boundary is adopted, the zone requirements of the least restrictive
portion of such lot shall extend 30 feet into the more restrictive
portion of the lot, provided that the lot has frontage on a road in
the less restricted zone.
In the event that a metes-and-bounds description has been filed
for a zone change or a variance as required by this chapter, such
metes-and-bounds description may be used in lieu of other provisions
of this article.