Table 9-1
Area and Design Requirements
| |||
---|---|---|---|
Permitted Uses
| |||
Area/Design Features
|
All Permitted Uses (unless specifically listed in Article XVI)
| ||
Lot area per unit - minimum
|
Shall be based on size of the buildings, required setbacks, coverage, parking, loading/unloading, and other applicable standards including Chapters 360, relating to stormwater management, and 370, relating to subdivision and land development
|
N/A
| |
Minimum lot width at front lot line — interior lot
|
N/A
| ||
Minimum lot width at front lot line - corner lot
|
N/A
| ||
Setback - front minimum
|
20 feet
|
Not permitted to be located between the principal building and
the public street.
| |
Setback - side minimum
|
10 feet*, except 0 feet at the shared lot line of lawfully attached
buildings or uses constructed with a shared common party wall and
provided the notarized, written consent of the owner of abutting lot
and building
|
10 feet
| |
Setback - rear minimum
|
20 feet
|
3 feet, except that detached garages adjacent to and having
access to an alley shall be set back 5 feet from the right-of way
or 15 feet from the center line of the alley, whichever is greater
| |
Impervious lot coverage - maximum
|
85%
|
Included as part of total maximum impervious coverage
| |
Vegetative coverage - minimum
|
10%
|
Included as part of total minimum vegetative coverage
| |
Building height - maximum
|
40 feet
|
Not higher than the principal structure.
|
NOTES:
| ||
---|---|---|
*
|
Thirty feet when abutting property in the residential districts
or existing residential use in the mixed use districts.
|