[Ord. No. 6430 §1, 6-14-2016]
For purposes of applying this Article, the following words, terms and phrases shall have the meanings ascribed to them in this Section, except where the context clearly indicates a different meaning:
ARBORIST, CERTIFIEDAn individual trained in the art and science of planting, caring for and maintaining individual trees and certified by the International Society of Arboriculture (ISA).
CALIPERThe diameter of a tree trunk measured at six (6) inches above the ground for trees up to four (4) inch caliper or twelve (12) inches above the ground for trees four (4) inch caliper to twelve (12) inch caliper. Typically used to describe the size of nursery stock or recently planted trees. For trees with multiple stems, the caliper of each stem shall be measured and the average of all measurements shall constitute the caliper of the tree. (See definition of "Diameter at Breast Height (DBH)" for measurement of larger trees over twelve (12) inch caliper).
CONDITION, EXISTING TREESA. GOOD CONDITIONThe tree shape and form is average to excellent. The tree has a good main trunk. The branches may be crowded with minor branch dieback. There are few or minor pests, good leaf color and size, no obvious root or structural problems.
B. FAIR CONDITIONThe tree needs pruning of live or dead branches due to habit, decline or lack of maintenance. The tree may have pest problems or minor trunk damage, poor branch angle and multi-trunks. There are no obvious structural or hazardous conditions.
C. POOR CONDITIONThe tree has many dead branches, splitting trunk and hazardous branches with more than half of the crown dead. The tree may be leaning, have structural problems and extensive damage from insects or disease.
D. DEAD/DYING CONDITIONThe tree has extensive branch dieback or trunk decay, storm damaged branches, heavy pest problems, or already dead and needing to be removed.
CONTRIBUTING TREEAny tree measuring three (3) caliper inches to nineteen (19) inches DBH that is in fair to good condition and is not an invasive species as defined by the Missouri Department of Conservation. (See definition of "Condition").
CONSTRUCTION DAMAGEInjury to a tree caused as a result of construction activities including but not limited to root damage caused by trenching, pulling of roots, changes in soil grade (relocation, removal or filling of soil), paving over roots or compaction of soil, and damage to tree trunks or branches. (See definition of "Impacted Tree").
CRITICAL ROOT ZONE (CRZ)A given distance from the trunk of a tree that includes the soil area below ground that contains the tree's root structure and the space above ground within the tree's canopy drip line or beyond. The CRZ is protected for the viability and stability of a tree to be retained on site in a healthy condition. (See definition of "Structural Root Zone (SRZ)"). The Critical Root Zone radius equals one and twenty-five hundredths (1.25) feet for every one (1) inch of tree diameter except in circumstances where the observed CRZ is significantly larger or smaller, in which case on-site conditions will take precedence.
DIAMETER AT BREAST HEIGHT (DBH)The diameter of a tree trunk at four and five tenths (4.5) feet above ground for trees over twelve (12) caliper inches. For species of trees whose normal growth pattern is characterized by multiple stems the diameter at breast height of each stem shall be measured and the average of all measurements shall constitute the diameter of the tree.
IMPACTED TREEA tree and its critical root zone (CRZ) that is in or adjacent to the development footprint and/or construction activities and whose growing conditions are or will be directly or indirectly changed as a result. (See definition of "Critical Root Zone (CRZ)" and "Tree Protection Zone (TPZ)").
LANDMARK TREEAny tree exceeding nineteen (19) inches DBH that is in fair to good condition and is not an invasive species as defined by the Missouri Department of Conservation. (See definition of "Condition").
LANDSCAPE ARCHITECTAn individual trained in design and construction of sites and landscapes and licensed as a professional landscape architect by the Missouri Division of Professional Registration.
LANDSCAPE PLANThe graphic depiction and written specifications indicating the planned arrangement of natural and constructed elements on the land (plantings, ground and water forms, circulation, walkways, irrigation, landscape lighting, etc.). All plants and trees are labeled on the landscape plan and keyed to complete tree and plant lists. Required elements of the Tree Protection Plan (TPP) can be included on the landscape plan or submitted as a separate plan. (See definition of "Tree Protection Plan.")
MAINTENANCEAny measure considered vital in accordance with standard horticultural practices to promote the general health of plant material.
NATIVE TREEAny tree species identified by Grow Native as a Missouri native plant.
PLANT LISTTabulation of all proposed plants by group (trees, shrubs, perennials, groundcovers and bulbs) and listed by common name, genus and species, installed size, spacing, and root stock type (bare root, pot or balled and burlapped).
PUBLIC RIGHT-OF-WAYThe area, the air space above the area, the area below and the area adjacent to any public street, highway, lane, path, alley, sidewalk, boulevard, drive, bridge, tunnel, parkway, waterway, public easement or sidewalk in which the City, County or State now or hereafter holds any property interest.
STREET TREESAny tree located within a public right-of-way along a street.
STRUCTURAL ROOT ZONE (SRZ)The circular zone radiating from the trunk of a tree that is required for the tree's stability in the ground. This zone contains the woody root growth and soil cohesion that is necessary to hold the tree upright but not the critical root zone (CRZ) required for the tree's long-term health and viability. (See definition of "Critical Root Zone (CRZ)" and "Tree Protection Zone (TPZ)"). The structural root zone will be determined by the tree's caliper or DBH. For reference and site planning purposes, the SRZ radius by tree size is indicated below:
| Caliper or DBH (inches) | SRZ Radius (feet) |
|---|
| 1 | 1 |
| 2-3 | 2 |
| 4-5 | 3 |
| 6-7 | 4 |
| 8-9 | 5 |
| 10-11 | 6 |
| 12-14 | 7 |
| 15-18 | 8 |
| 19-22 | 9 |
| 24-36 | 10 |
| 37-45 | 11 |
| 50-55 | 12 |
| 60-65 | 13 |
| 70+ | 14 |
TREEA woody deciduous or evergreen plant typically growing as a single stem or multi-stem in an upright or weeping form that will attain a mature height of at least fifteen (15) feet and at least three (3) caliper inches.
TREE CANOPYThe layer of leaves, branches and stems of a tree that cover the ground when viewed from above.
TREE PROTECTION PLAN (TPP)Drawings that graphically illustrate the existing trees on the project site, adjacent to the site and in the right-of-way. The TPP will include graphic depictions of the Tree Protection Zones (TPZ)/tree protection fence, Critical Root Zone (CRZ) and Structural Root Zones (SRZ), and specific measures to protect trees during construction or other site disruptions. Required elements of the TPP can be included on the landscape plan or submitted as a separate plan. (See definition of "Landscape Plan.")
TREE PROTECTION ZONE (TPZ)The zone around the tree that will be maintained as natural and original conditions over the course of the development. This zone must be no less than a five-foot radius from the trunk per caliper inch or DBH. The TPZ is to be illustrated on the landscape plan or the Tree Protection Plan (TPP).