[Ord. 154, 9/3/1985, § 600]
1. 
For the purpose of having a subdivision or land development considered and approved by the Planning Commission or Borough Council, the applicant shall file with the Borough Secretary the following items at the preliminary plan or minor subdivision final plan review stage in addition to the required number of plans:
A. 
A signed subdivision and land development application.
B. 
A list of all encumbrances appearing of record in the Office of the Recorder of Deeds or marked lis pendens (pending lawsuits) in the Office of the Prothonotary.
C. 
A statement setting forth in detail the character of the improvements the applicant proposes to make on the property to be developed.
D. 
A development schedule indicating the approximate date when construction can be expected to begin and be completed.
E. 
A copy of all restrictions, covenants, etc., if any, under which lots are to be sold.
F. 
Names and mailing addresses of all adjacent property owners.
[Ord. 154, 9/3/1985, § 601]
1. 
Although the amount of information submitted at this stage is the option of the applicant, well researched information can minimize expense at the final plan stage and simplify the final plan review. It is recommended that the sketch plan submission include the following data:
A. 
Site plan, showing:
(1) 
Tax parcel number.
(2) 
Name of subdivision or land development.
(3) 
Name and address of the owner/applicant.
(4) 
Name and address of the surveyor, professional engineer, architect or landscape architect responsible for the plan.
(5) 
Zoning requirements, including:
(a) 
Applicable district.
(b) 
Maximum density permitted and proposed density.
(c) 
Lot size and yard requirements.
(d) 
Required and proposed open space and impervious surface ratios.
(e) 
Any variances or special exceptions granted.
(6) 
Location map showing relation of site to adjoining properties and streets within 1,000 feet (Scale one inch equals 800 feet)
(7) 
North point.
(8) 
Written and graphic scales (including scale of location map).
(9) 
Total acreage of the site.
(10) 
Site boundaries.
(11) 
Boundaries of all adjoining properties (with names of landowners in the case of unplatted land).
(12) 
Streets on and adjacent to the site with future rights-of-way.
(13) 
Buildings (and their uses), driveways, wells, septic systems, sewer lines, storm drains, culverts, bridges, utility easements, and other significant man-made features within 100 feet of and within the site (this includes properties across roadways).
(14) 
Proposed general street layout.
(15) 
Proposed general lot layout.
(16) 
Types of buildings proposed.
(17) 
Number of units proposed.
(18) 
Open space areas.
(19) 
Recreation areas.
(20) 
Landowner's authorization for Planning Commission representatives to enter land.
B. 
Natural features map showing any significant features on or near the site.
C. 
A written statement indicating the method of administration and maintenance of open space pursuant to § 22-710.
[Ord. 154, 9/3/1985, § 602]
1. 
Drafting Standards.
A. 
The plan shall be drawn at a scale of not more than one inch equals 100 feet.
B. 
Dimensions shall be set in feet and decimal parts thereof, and bearings in degrees, minutes, and seconds.
C. 
Each sheet shall be numbered and shall show its relationship to the total number of sheets.
D. 
Where any revision is made, or when the plan is a revision of a previously approved plan, dotted lines shall be used to show features or locations to be abandoned and solid lines to show the currently proposed features. Notations of revisions shall be dated.
E. 
The boundary line of subdivision shall be shown as a solid heavy line.
F. 
Plans shall be on sheets 18 inches by 24 inches, 24 inches by 36 inches, or 36 inches by 48 inches, and all lettering shall be so drawn as to be legible if the plan should be reduced to half size.
2. 
The preliminary plan shall show or be accompanied by the following information:
A. 
Site plan, showing:
(1) 
Tax parcel numbers.
(2) 
Name of subdivision or land development.
(3) 
Name and address of owner/applicant.
(4) 
Name and address of the surveyor, professional engineer, architect or landscape architect responsible for the plan.
(5) 
Zoning requirements, including:
(a) 
Applicable district.
(b) 
Maximum density permitted.
(c) 
Lot size and yard requirements.
(d) 
Open space and impervious surface ratios.
(e) 
Any variances or special exceptions granted.
(6) 
Performance standards proposed:
(a) 
Density.
(b) 
Open space ratio.
(c) 
Impervious surface ratio.
(d) 
Dwelling unit mix.
(e) 
Size of units (in bedrooms).
(7) 
Location map showing relation of site to adjoining properties and streets within 1,000 feet (Scale one inch equals 800 feet).
(8) 
North point.
(9) 
Written and graphic scales (including scale of location map).
(10) 
Total acreage of the site.
(11) 
A complete outline survey of the property to be subdivided or developed, showing all courses, distances, tie-ins to all adjacent intersections and areas.
(12) 
Location of all existing monuments.
(13) 
Boundaries of all adjoining properties (with names of landowners in the case of unplatted land).
(14) 
Streets on and adjacent to the site with future rights-of-way.
(15) 
Buildings (and their uses), driveways, sewer lines, storm drains, culverts, bridges, utility easements, and other significant man-made features within 100 feet of and within the site (this includes properties across roadways). If significant features exist further than 100 feet, the Planning Commission may require their inclusion.
(16) 
The proposed layout:
(a) 
The layout of streets, including widths of cartways and rights-of-way.
(b) 
The layout and approximate dimensions, areas, and uses of lots, building setback lines, and rear and side yard lines.
(c) 
The arrangement and use of buildings and parking areas in nonresidential developments and performance subdivisions with all necessary dimensions and number of parking spaces; elevations and perspective sketches of proposed buildings are encouraged.
(d) 
Open space areas.
(e) 
Recreational facilities.
(f) 
Rights-of-way and/or easements for all drainage, utilities, or other purposes. All underground utility lines shall be shown on the plan pursuant to the Underground Utility Line Protection Law, 73 P.S. § 176 et seq. The type of line, the utility company owning the line, the size of the line, and the width of any right-of-way or easement shall be shown.
(g) 
Sidewalks and pedestrian paths.
(h) 
Street lights.
(i) 
Fire hydrants.
(j) 
Monuments.
(k) 
If applicable, minimum isolation distances pursuant to 25 Pa. Code, Chapter 73, "Standards for Onlot Sewage Treatment Facilities."
(l) 
Gross and net lot areas.
3. 
Soil map, showing:
A. 
Soils types within the site, based on maps contained in the Soil Survey of Bucks and Philadelphia Counties, Pennsylvania, U.S. Department of Agriculture, Soil Conservation Service, 1975. A table shall indicate each soil's limitations for community development.
B. 
Contour lines measured at vertical intervals of two feet. Such slopes shall be determined by on-site survey, not interpretation of U.S.G.S. maps.
C. 
Floodplain soil areas.
D. 
Slope areas.
(1) 
Eight to 15%.
(2) 
Fifteen to 25%.
(3) 
Twenty-five percent or over.
4. 
Vegetation map, showing:
A. 
Large trees over six inches caliper standing alone.
B. 
Other significant vegetation.
5. 
Water resources map, showing:
A. 
Streams.
B. 
Swales.
C. 
Lakes and Ponds.
6. 
Encroachment map which illustrates:
A. 
All natural features.
B. 
A preliminary regrading plan which illustrates all disturbance of the identified natural feature areas.
C. 
The amount of each natural feature disturbed shall be indicated and illustrated on the encroachment map.
7. 
Sedimentation and erosion control plan pursuant to the Clean Streams Law, P.L. 1977 and in accordance with standards and specifications found in the "Erosion and Sediment Control Handbook" available through the Bucks County Conservation District.
8. 
Sewer and water plan, showing:
A. 
Public sanitary sewer facilities.
B. 
Public water supply facilities.
9. 
Landscaping and grading plan, showing:
A. 
Existing and proposed grades for the entire site.
B. 
Existing vegetation to be removed.
C. 
Existing vegetation to be preserved.
D. 
Proposed planting schedule, indicating the locations, species, and sizes of plantings.
E. 
Location of all proposed catch basins, retention basins, and drainage inlets.
10. 
Tentative typical cross-sections and center-line profiles for each proposed street shown on the Site plan.
11. 
Management information including a written statement indicating the method of administration and maintenance of open space.
12. 
Community Impact Analyses.
13. 
Planning modules for land development as required by Chapter 71 of the Pennsylvania Sewage Facilities Act.
[Ord. 154, 9/3/1985, § 603; as amended by Ord. 256, 5/24/2004]
1. 
Drafting Standards. See preliminary plan requirements under § 22-603, Subsection 1.
2. 
The final plan shall show or be accompanied by the following information:
A. 
Site plan, in accordance with the requirements of § 22-603, Subsection 2B, and the following:
(1) 
Where the final plan covers only a part of the applicant's entire holding, a sketch plan shall be submitted of the prospective street layout for the remainder of the site.
(2) 
Public sewage collection, treatment and disposal service. The proposed system(s) must receive approval of the planning modules for land development from the Bucks County Health Department and the Pennsylvania Department of Environmental Protection. The applicant shall provide written certification from the servicing sewer authority that capacity will be available for the proposed subdivision or land development.
B. 
Soil map, in accordance with the requirements of § 22-603, Subsection 3.
C. 
Vegetation map, in accordance with the requirements of § 22-603, Subsection 4.
D. 
Water resources map, in accordance with the requirements of § 22-603, Subsection 5.
E. 
Encroachment map, in accordance with the requirements of § 22-603, Subsection 6.
F. 
Sedimentation and erosion control plan, in accordance with the requirements of § 22-603, Subsection 7.
G. 
Sewer and water plan, in accordance with the requirements of § 22-603, Subsection 8.
H. 
Landscaping and grading plan, in accordance with the requirements of § 22-603, Subsection 9.
I. 
Improvement Construction Plan (drainage and construction):
(1) 
The improvement construction plan shall be at any of the following scales:
Horizontal
Vertical
20'/inch
2'/inch
50'/inch
5'/inch
100'/inch
10'/inch
(2) 
Horizontal Plan (streets). The horizontal plan shall show details of the horizontal layout including:
(a) 
Center line with bearings, distances, curve data and stations corresponding to the profile.
(b) 
Right-of-way and curb lines with radii at intersections.
(c) 
Beginning and end (physical location) of proposed construction.
(d) 
Tie-ins by courses and distances to intersection of all public roads, with their names and widths.
(e) 
Location of all proposed monuments with reference to them.
(f) 
Property lines and ownership of abutting properties.
(g) 
Location and size of all drainage structure, sidewalks, public utilities, lighting standards, and street name signs.
(3) 
Horizontal Plan (storm drains and sanitary sewers).
(a) 
Location and size of line with stations corresponding to the profile.
(b) 
Location of manholes or inlets with grade between and elevation of flow lane and top of each manhole or inlet.
(c) 
Property lines and ownership, with details of easements where required.
(d) 
Beginning and end (physical location) of proposed construction.
(e) 
Location of laterals.
(f) 
Location of all other drainage facilities and public utilities in the vicinity of storm and/or sanitary sewer lines.
(g) 
Hydraulic design data for culverts and/or bridge structures.
(4) 
Profile (streets).
(a) 
Profile of existing ground surface along center line of street.
(b) 
Proposed center line grade with percent on tangents and elevations at fifty-foot intervals, grade intersection and either end of curb radii.
(c) 
Vertical curve data including length, elevations and minimum sight distance as required by Part 7.
(5) 
Cross-Section (streets).
(a) 
Right-of-way width and location and width of paving.
(b) 
Type, thickness, and crown of paving.
(c) 
Type and size of curb.
(d) 
Grading of sidewalk area.
(e) 
Location, width, type and thickness of sidewalks.
(f) 
Typical location of sewers and utilities with sizes.
(6) 
Profile (storm drains and sanitary sewers).
(a) 
Profile of existing ground surface with elevations at top of manholes or inlets.
(b) 
Profile of storm drain or sewer showing type and size of pipe, grade, cradle, manhole, and inlet locations, and elevation along flow line at 50 foot intervals.
(7) 
Management Information. A formal contract establishing the method of open space administration and maintenance.
(8) 
Acknowledgments.
(a) 
All offers of dedication and covenants governing the reservation and maintenance of undedicated open space, bearing certificate of approval of the Borough Solicitor.
(b) 
Such private deed restrictions, including building setback lines, as maybe imposed upon the property as a condition of sale, together with a statement of any restrictions previously imposed which may affect the title to the land being subdivided.
(c) 
Agreement for any street not offered for dedication.
(d) 
A written agreement, pursuant to § 22-403.
[Ord. 154, 9/3/1985, § 604]
1. 
Drafting Standards.
A. 
The plan shall be drawn at a scale of not more than one inch equals 100 feet.
B. 
Dimensions shall be in feet and decimal parts thereof, and bearings in degrees, minutes and seconds.
C. 
The boundary line of the subdivision shall be shown as a solid heavy line.
D. 
Plans shall be on sheets 18 inches by 24 inches, 24 inches by 36 inches, or 36 inches by 48 inches, and all lettering shall be so drawn as to be legible if the plans should be reduced to half size.
2. 
The minor subdivision plan shall show or be accompanied by the following information:
A. 
Site plan, showing:
(1) 
Tax parcel number.
(2) 
Name of subdivision.
(3) 
Name and address of the owner/applicant.
(4) 
Name and address of the surveyor, professional engineer, architect or landscape architect, responsible for the plan.
(5) 
Zoning requirements, including:
(a) 
Applicable district.
(b) 
Maximum density permitted and proposed density.
(c) 
Lot size and yard requirements.
(d) 
Required and proposed open space and impervious surface ratios.
(e) 
Any variances or special exceptions granted.
(6) 
Location map showing relation of site to adjoining properties and streets within 1,000 feet (Scale one inch equals 800 feet).
(7) 
North point.
(8) 
Written and graphic scales (including scale of location map).
(9) 
Total acreage of the site.
(10) 
Site boundaries.
(11) 
Boundaries of all adjoining properties (with names of landowners in the case of, unplatted land).
(12) 
Streets on and adjacent to the site with future rights-of-way.
(13) 
Buildings (and their uses), driveways, sewer lines, storm drains, culverts, bridges, utility easements, and other significant man-made features within 100 feet of and within the site (this includes properties across roadways).
(14) 
Proposed general lot layout.
(15) 
Open space areas.
B. 
Natural Features Map. The Planning Commission may require the submission of a natural features map if the site contains significant natural features and a sketch plan containing this information was not submitted.
C. 
Planning modules for land development as required by Chapter 71 of the Pennsylvania Sewage Facilities Act.
D. 
Acknowledgments:
(1) 
All offers of dedication and covenants governing the reservation and maintenance of undedicated open space, bearing certificate of approval of the Borough Solicitor.
(2) 
Such private deed restrictions, including building setback lines, as may be imposed upon the property as a condition to sale, together with a previously imposed which may affect the title to the land being subdivided.
[Ord. 154, 9/3/1985, § 605]
1. 
The record plan shall be a clear and legible blue or black line print on white opaque linen and one paper print, and shall be an exact copy of the approved final plan on a sheet of the size required for final plans.
2. 
The following information shall appear on the record plan, in addition to the information required in §§ 22-604 and 22-605 for the final plan.
A. 
Seals.
(1) 
The impressed seal of the licensed professional land surveyor who prepared the plan in accordance with the Commonwealth of Pennsylvania Act 367 or the seal of a professional engineer, architect or landscape architect.
(2) 
The impressed corporation seal, if the applicant is a corporation.
(3) 
The impressed seal of a notary public or other qualified officer, acknowledging owner's statement of intent.
B. 
Acknowledgments:
(1) 
A statement to the effect that the applicant is the owner of the land proposed to be subdivided and that the subdivision shown on the final plan is made with his or their free consent and that it is desired to record the same.
(2) 
An acknowledgment of said statement before an officer authorized to take acknowledgments.
C. 
The following signatures shall be placed directly on the plan in black ink:
(1) 
The signatures of the owner or owners of the land; if the owner of the land is a corporation, the signatures of the president and secretary of the corporation shall appear.
(2) 
The signature of the notary public or other qualified officer, acknowledging the owner's statement of intent.
(3) 
The signature of the licensed surveyor, professional engineer, architect or landscape architect who prepared the plan.
(4) 
The signatures of the Chairman and Secretary of the Planning Commission.
(5) 
The signature of the Borough Engineer.
(6) 
The signatures of the Chairman and Secretary of the Borough Council.