[Ord. No. 19-2020, 6-8-2020]
The Village's mixed-use zoning districts are listed in Table 90-120-1. When this zoning chapter refers to "mixed-use" zoning districts or "MX" zoning districts, it is referring to these districts.
Table 90-120-1
Mixed-Use (MX) Districts
Symbol
District Name
MX-1
Transitional Mixed-Use
MX-2
Neighborhood Mixed-Use
MX-3
Corridor Mixed-Use
MX-4
Village Mixed-Use
[Ord. No. 19-2020, 6-8-2020]
(a) 
General. Mixed-use zoning districts are primarily intended to create, maintain and promote walkable mixed-use development patterns.
(b) 
MX-1. The MX-1 District is intended to accommodate commercial and mixed-use buildings in transition areas at the edges of established residential neighborhoods.
(c) 
M-X2. The MX-2 District is primarily intended to accommodate small, neighborhood-scale mixed use-buildings.
(d) 
MX-3. The MX-3 District is primarily intended to accommodate mixed-use buildings in mixed-use corridors and nodes.
(e) 
MX-4. The MX-4 District is primarily intended to accommodate mixed-use buildings in a walkable village center context.
[Ord. No. 19-2020, 6-8-2020]
Uses are allowed in MX Districts in accordance with the use regulations of Division 90-310.
[Ord. No. 19-2020, 6-8-2020]
Buildings in MX Districts are subject to compliance with the lot and building regulations of Table 90-120-2.
Table 90-120-2
MX District Lot and Building Regulations
Regulation
MX-1
MX-2
MX-3
MX-4
(a)
Lot
Minimum lot area (square feet)
4,000
4,000
4,000
2,500
Minimum lot area per dwelling unit (square feet)
2,000
No minimum; all other regulations apply.
Minimum lot width (feet)
40
40
40
25
Maximum building coverage (% of lot)
55
65
75
90
(b)
Principal Building Siting
Primary street build-to zone (minimum/maximum; feet)
25/35
10/20
15/25
5/10
Building frontage within primary street build-to zone (minimum)
NA
60%
60%
80%
Side street build-to zone (minimum/maximum; feet)
25/35
10/20
15/25
5/10
Building frontage within side street build-to zone (minimum)
NA
40%
40%
40%
Driveway side setback (minimum; feet)
5
5
5
5
Nondriveway side setback (minimum; feet)
0 or 5
0 or 5
0 or 5
0 or 5
Rear setback (minimum; feet)
25
25
25
25
(c)
Principal Building Design
Primary street building width (maximum; feet)
50
80
NA
100
Ground-story transparency (minimum)
NA
50%
50%
65%
Upper-story transparency (minimum)
NA
20%
20%
20%
Primary street-facing entrance
Required in all MX Districts
Ground-story floor to ceiling height (minimum; feet)
NA
12
12
14
(d)
Principal Building Size
Maximum ground floor area (square feet)
1,000
2,000
No maximum
No maximum
(e)
Parking Siting
Allowed location
Not permitted in front yard
Primary street setback (minimum; feet)
25
25
25
25
Side street setback (minimum; feet)
10
10
10
10
Side (minimum; feet)
5
5
5
5
Rear (minimum; feet)
5
5
5
5
(f)
Accessory Building Siting
Allowed location
Allowed in rear yard only
Minimum side and rear setbacks (feet)
5
5
5
5
Minimum building separation (feet)
10
10
10
10
(g)
Maximum Building Height
Principal building (feet)
35
35
48
60
Accessory building (feet)
20
20
20
20
(h)
Minimum Building Height
Principal building (stories)
None
None
2
2
Accessory building (feet)
None
None
None
None
Figure 90-120-1
MX District Lot and Building Regulations
(See Table 90-120-2)
[Ord. No. 19-2020, 6-8-2020]
Buildings and uses in MX Districts are subject to all other applicable regulations of this zoning chapter, including the following:
(a) 
Accessory uses and structures. See Division 90-330.
(b) 
Parking. See Division 90-420.
(c) 
Landscape and screening. See Division 90-430.
(d) 
Signs. See Division 90-440.
(e) 
Sewer and water service. See Division 90-410.