[Ord. No. 19-2020, 6-8-2020]
The Village's mixed-use zoning districts are listed in Table
90-120-1. When this zoning chapter refers to "mixed-use" zoning districts
or "MX" zoning districts, it is referring to these districts.
|
Table 90-120-1
Mixed-Use (MX) Districts
| |
|---|---|
|
Symbol
|
District Name
|
|
MX-1
|
Transitional Mixed-Use
|
|
MX-2
|
Neighborhood Mixed-Use
|
|
MX-3
|
Corridor Mixed-Use
|
|
MX-4
|
Village Mixed-Use
|
[Ord. No. 19-2020, 6-8-2020]
(a)
General. Mixed-use zoning districts are primarily intended to
create, maintain and promote walkable mixed-use development patterns.
(b)
MX-1. The MX-1 District is intended to accommodate commercial
and mixed-use buildings in transition areas at the edges of established
residential neighborhoods.
(c)
M-X2. The MX-2 District is primarily intended to accommodate
small, neighborhood-scale mixed use-buildings.
(d)
MX-3. The MX-3 District is primarily intended to accommodate
mixed-use buildings in mixed-use corridors and nodes.
(e)
MX-4. The MX-4 District is primarily intended to accommodate
mixed-use buildings in a walkable village center context.
[Ord. No. 19-2020, 6-8-2020]
Uses are allowed in MX Districts in accordance with the use
regulations of Division 90-310.
[Ord. No. 19-2020, 6-8-2020]
Buildings in MX Districts are subject to compliance with the
lot and building regulations of Table 90-120-2.
|
Table 90-120-2
MX District Lot and Building Regulations
| |||||
|---|---|---|---|---|---|
|
Regulation
|
MX-1
|
MX-2
|
MX-3
|
MX-4
| |
|
(a)
|
Lot
| ||||
 |
Minimum lot area (square feet)
|
4,000
|
4,000
|
4,000
|
2,500
|
|
Minimum lot area per dwelling unit (square feet)
|
2,000
|
No minimum; all other regulations apply.
| |||
 |
Minimum lot width (feet)
|
40
|
40
|
40
|
25
|
|
Maximum building coverage (% of lot)
|
55
|
65
|
75
|
90
| |
|
(b)
|
Principal Building Siting
| ||||
 |
Primary street build-to zone (minimum/maximum; feet)
|
25/35
|
10/20
|
15/25
|
5/10
|
 |
Building frontage within primary street build-to zone (minimum)
|
NA
|
60%
|
60%
|
80%
|
 |
Side street build-to zone (minimum/maximum; feet)
|
25/35
|
10/20
|
15/25
|
5/10
|
 |
Building frontage within side street build-to zone (minimum)
|
NA
|
40%
|
40%
|
40%
|
 |
Driveway side setback (minimum; feet)
|
5
|
5
|
5
|
5
|
 |
Nondriveway side setback (minimum; feet)
|
0 or 5
|
0 or 5
|
0 or 5
|
0 or 5
|
 |
Rear setback (minimum; feet)
|
25
|
25
|
25
|
25
|
|
(c)
|
Principal Building Design
| ||||
|
|
Primary street building width (maximum; feet)
|
50
|
80
|
NA
|
100
|
 |
Ground-story transparency (minimum)
|
NA
|
50%
|
50%
|
65%
|
 |
Upper-story transparency (minimum)
|
NA
|
20%
|
20%
|
20%
|
 |
Primary street-facing entrance
|
Required in all MX Districts
| |||
|
Ground-story floor to ceiling height (minimum; feet)
|
NA
|
12
|
12
|
14
| |
|
(d)
|
Principal Building Size
| ||||
|
Maximum ground floor area (square feet)
|
1,000
|
2,000
|
No maximum
|
No maximum
| |
|
(e)
|
Parking Siting
| ||||
|
Allowed location
|
Not permitted in front yard
| ||||
 |
Primary street setback (minimum; feet)
|
25
|
25
|
25
|
25
|
|
Side street setback (minimum; feet)
|
10
|
10
|
10
|
10
| |
|
Side (minimum; feet)
|
5
|
5
|
5
|
5
| |
|
Rear (minimum; feet)
|
5
|
5
|
5
|
5
| |
|
(f)
|
Accessory Building Siting
| ||||
|
Allowed location
|
Allowed in rear yard only
| ||||
|
Minimum side and rear setbacks (feet)
|
5
|
5
|
5
|
5
| |
|
Minimum building separation (feet)
|
10
|
10
|
10
|
10
| |
|
(g)
|
Maximum Building Height
| ||||
|
Principal building (feet)
|
35
|
35
|
48
|
60
| |
|
Accessory building (feet)
|
20
|
20
|
20
|
20
| |
|
(h)
|
Minimum Building Height
| ||||
|
Principal building (stories)
|
None
|
None
|
2
|
2
| |
|
Accessory building (feet)
|
None
|
None
|
None
|
None
| |
|
Figure 90-120-1
MX District Lot and Building Regulations
(See Table 90-120-2)
 |
[Ord. No. 19-2020, 6-8-2020]
Buildings and uses in MX Districts are subject to all other
applicable regulations of this zoning chapter, including the following:
