Table 550-132A(1): Permanent Sign Group1
|
Sign Area and Height Maximums for Zoning Districts
| |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sign Categories and Sign Types
|
Sign Permit Needed
|
Number of Signs Allowed
|
Sign Area Formula
(each side)
|
Sign Location Requirements
|
Sign Lighting Allowed
|
ER, CR, SR, TR
|
MR, SNR, RH, NO, NB
|
PO, PB, GB, CB, PI, GI, HI
| ||||||||
A. Freestanding Sign Category:*
| ||||||||||||||||
1. Monument sign
|
Sign Permit required for each new sign.
|
Limit of 1 freestanding sign for every 330 feet of street frontage
or 1 sign per each site entrance, regardless of the number of tenants
|
Maximum of 1 square foot of sign area for every foot of the
site's street frontage - up to the District maximum
|
Minimum sign setback from each property line shall be greater
than or equal to the sign height
|
Standard2
|
2 square feet maximum area per sign
5 feet maximum height per sign
|
50 square feet maximum area per sign
6 feet maximum height per sign
|
100 square feet maximum area per sign
15 feet maximum height per sign
| ||||||||
2. Dual post sign
|
50 square feet maximum area per sign
6 feet maximum height per sign
|
100 square feet maximum area per sign
6 feet maximum height per sign
| ||||||||||||||
3. Pylon sign
|
Limit of 1 pylon sign for each site, regardless of the number
of tenants
|
Not allowed
|
See § 550-132C
| |||||||||||||
B. On-Building Sign Category:* All on-building signs on the
same building facade shall be the same type of sign (1-5), below.
| ||||||||||||||||
1. Wall sign
|
Sign permit required for each new sign
|
Limit of 1 on-building sign for each tenant, on each building
facade that faces (roughly parallel to) a public street
|
Maximum of 1 square foot of sign area for every foot of building's
facade length - up to the District maximum
|
No part of any sign shall extend higher than the building parapet
or eave and minimum overhang clearance required
|
Standard2
|
2 square feet maximum area per sign
|
100 square feet maximum area per sign
|
200 square feet maximum area per sign
| ||||||||
2. Awning sign
|
Ambient only
|
50 square feet maximum area per sign
|
100 square feet maximum area per sign
| |||||||||||||
3. Canopy sign
|
Ambient and internal
| |||||||||||||||
4. Marquee sign
|
100 square feet maximum area per sign
|
200 square feet maximum area per sign
| ||||||||||||||
5. Projecting sign
|
Not allowed
| |||||||||||||||
C. Pedestrian Sign Category:* All pedestrian signs on the same
building facade shall be the same type of sign (1-2), below.
| ||||||||||||||||
1. Blade sign
|
Sign permit required for each new sign
|
Limit of 1 pedestrian sign for each tenant.
|
None needed. Use maximum area limit
|
On-building. Must be located in front of a customer entrance.
|
Ambient only
|
Not allowed
|
14 square feet maximum area per sign
|
16 square feet maximum area per sign
| ||||||||
2. Suspended sign
| ||||||||||||||||
D. Permanent Changeable Sign Category:*
| ||||||||||||||||
1. Wall-mounted changeable sign
|
Sign permit required for each new sign
|
Limit of 1 permanent wall-mounted changeable sign for each tenant
|
None needed. Use max area limit
|
On-building. Maximum 4 inches from wall
|
Ambient only
|
Not allowed
|
8 feet maximum area per sign
| |||||||||
2. Freestanding changeable sign
|
Limit of 1 permanent freestanding changeable sign for each tenant
unless used in conjunction with a drive through
Drive through use limit of 1 permanent freestanding changeable
sign per drive through lane
|
Freestanding. Within 10 feet of public entrance
When used in conjunction with a drive-through per C.U.P.
|
Standard2
|
15 square feet maximum area per sign
8 feet maximum height per sign
| ||||||||||||
3. Drive-through sign
|
Limit of 1 drive-through sign per drive-through lane
|
Per C.U.P.
|
Not allowed
|
40 square feet maximum area per sign
8 feet maximum height per sign
|
*
|
Refer to § 550-131A for definition and rules for each sign category (lettered) and each sign type (numbered).
|
1
|
Available to land uses identified in Article IV of this chapter as agricultural, institutional, commercial, storage or disposal, transportation, and industrial.
|
2
|
"Standard" means the following forms of sign lighting: ambient,
backlit, internal character or cabinet, and gooseneck.
|
Table 550-132A(2): Temporary Sign Group1
|
Sign Area and Height Maximums for Zoning Districts
| ||||||||
---|---|---|---|---|---|---|---|---|---|
Sign Categories and Sign Types
|
Sign Permit Needed
|
Number of Signs Allowed
|
Sign Area Formula
(each side)
|
Sign Location Require-ments
|
Sign Lighting Allowed
|
ER, CR, SR, TR
|
MR, SNR, RH, NO, NB
|
PO, PB, GB, CB, PI, GI, HI
| |
A. Temporary Board & Banner Sign Category:* Temporary board,
banner, or feather sign maybe displayed permanently, but typically
are not.
| |||||||||
1. Board sign
|
Sign permit not required
|
Any combination of sign type, not to exceed 2 signs per site,
or 1 sign per each site entrance, or Limit 1 sign type per each tenant
|
None needed. Use maximum area limit
|
On-building or free-standing. Minimum sign setback from each
property line shall be greater or equal to the sign height.
|
Ambient only
|
32 square feet maximum area per sign 6 feet maximum height per
sign
|
40 square feet maximum area per sign
6 feet maximum height per sign
| ||
2. Banner sign
| |||||||||
3. Feather sign
|
Limit of 2 feather signs for each site or limit 1 per each tenant
|
Not allowed
|
30 square feet maximum area per sign
10 feet maximum height per sign
| ||||||
B. Temporary Changeable Sign Category:* Temporary changeable
signs may be displayed daily3
| |||||||||
1. Sandwich board sign
|
Sign permit not required
|
Limit of 1 Sandwich Board Sign per sidewalk entrance during
owner/tenant occupation of the property.
|
Shall not be more than four feet high or more than two feet
wide, including frame or supporting structure.
|
Street terrace or on private property within the Central Business
(CB) Zoning District
|
Ambient only
|
Not allowed
|
Allowed in CB Zoning District Only
8 square feet maximum area per sign
4 feet maximum height per sign
| ||
C. Temporary Approved Development Sign Category:*
| |||||||||
1. Active building board sign
|
Sign permit not required
|
Limit of 1 for each approved building with a valid Building
Permit
|
None needed. Use max area limit
|
On-building or free-standing. Minimum sign setback from each
property line shall be greater or equal to the sign height
|
Ambient only
|
32 square feet maximum area per sign
6 feet maximum height per sign
| |||
2. Active plat board sign
|
Limit of 1 for each public street intersection at the perimeter
of any active plat phase
|
32 square feet maximum area per sign
6 feet maximum height per sign
|
*
|
Refer to § 550-131B for definition and rules for each sign category (lettered) and each sign type (numbered).
|
1
|
Available to land uses identified in Article IV of this chapter as agricultural, institutional, commercial, storage or disposal, transportation, and industrial.
|
3
|
Shall be kept inside the principal structure when the property
owner or tenant is not occupying the principal structure.
|
Table 550-132A(3): Permanent Misc. Sign Group1
|
Sign Area and Height Maximums for Zoning Districts
| ||||||||
---|---|---|---|---|---|---|---|---|---|
Sign Categories and Sign Types
|
Sign Permit Needed
|
Number of Signs Allowed
|
Sign Area Formula
(each side)
|
Sign Location Require-ments
|
Sign Lighting Allowed
|
ER, CR, SR, TR, MR, SNR
|
RH, NO, NB
|
PO, PB, GB, CB, PI, GI, HI
| |
B. Optional Miscellaneous Sign Category:*
| |||||||||
1. Plaque sign
|
Sign permit required for each new sign
|
Up to 3 per designated historic property, site, or district
|
None needed. Use max area limit
|
On-building, within 10 feet of the main entrance.
|
Ambient only
|
6 square feet maximum area per sign
8 feet maximum height per sign
| |||
2. Permanent plat sign
|
Per final plat or Certified Survey Map
|
In plat or Certified Survey Map Outlot
|
100 square feet maximum area per sign
8 feet maximum height per sign
| ||||||
3. Auxiliary freestanding sign.
|
Not to exceed the total number of required parking stalls
|
3 feet from any street, side, or rear lot line
0 feet for parcels located within the CB Zoning District
|
2 square feet maximum area per sign
8 feet maximum height per sign
| ||||||
4. Auxiliary wall sign.
|
6 square feet maximum area per sign
|
*
|
Refer to § 550-131C for definition and rules for each sign category (lettered) and each sign type (numbered).
|
1
|
Available to all land uses.
|
2
|
"Standard" means the following forms of sign lighting: ambient,
backlit, internal character or cabinet, and gooseneck
|
Table 550-132A(4): Temporary Misc. Sign Group1
|
Sign Area and Height Maximums for Zoning Districts
| ||||||||
---|---|---|---|---|---|---|---|---|---|
Sign Categories and Sign Types
|
Sign Permit Needed
|
Number of Signs Allowed
|
Sign Area Formula
(each side)
|
Sign Location Require-ments
|
Sign Lighting Allowed
|
ER, CR, SR, TR, MR, SNR
|
RH, NO, NB
|
PO, PB, GB, CB, PI, GI, HI
| |
A. Yard Sign Category:* A Yard Sign may be displayed permanently,
but typically is not.
| |||||||||
1. Stake sign
|
Sign permit not required
|
Unlimited
|
None needed. Use maximum area limit.2
|
Must be located on-site.2
Minimum sign setback from each property line shall be greater
than or equal to sign height.
|
Ambient only
|
6 square feet maximum area per sign
4 feet maximum height per sign
| |||
2. Frame sign
| |||||||||
3. Arm and post sign
|
9 square feet maximum area per sign
6 feet maximum height per sign
|
*
|
Refer to § 550-131D for definition and rules for each sign category (lettered) and each sign type (numbered).
|
1
|
Available to all land uses.
|
2
|
Sign must be located on-site and must not be located within
any street right-of-way (which includes the entire public sidewalk
and street terrace area).
|