[Added 5-12-2003 by Ord. No. 2003-05]
The purpose of this article is:
A.
To encourage the effective use of signs as a means of communication
in the Township and to allow each individual business to identify
itself and the goods and services it offers in a clear and distinctive
manner.
B.
To maintain and enhance the aesthetic environment by encouraging
signs which, by their good design, are integrated with and harmonious
to the site that they occupy and the surrounding properties.
C.
To create a unique environment, to attract visitors and to enhance
the Township's ability to attract sources of economic development
and growth.
D.
To improve pedestrian and traffic safety.
E.
To restrict and eliminate signs tending to depreciate the value of
property and to minimize the possible adverse affect of signs on nearby
public and private property.
F.
To render unlawful signs that are in disrepair or of faulty construction
and eliminate confusing sign displays.
G.
To enable the fair and consistent enforcement of these regulations.
H.
To establish a permit system subject to the standards of these regulations,
establish a reasonable fee and provide for the enforcement of the
provisions of these regulations.
[Amended 12-10-2001 by Ord. No. 2001-12; 5-12-2003 by Ord. No. 2003-05; 3-22-2021 by Ord. No. 2021-3]
A.
Signs shall be located to avoid impeding or interfering with the
operation of a traffic signal, traffic signage, and traffic control
devices or of a roadway, sidewalk or pathway, and with the general
vision and safety of motorists, pedestrians and bicyclists.
B.
Signs shall not be erected or used on the top of any building or
structure.
C.
Signs shall be designed without any type of visual flashing or physically
moving part, fixture or caricature. Electronic digital signs shall
be designed without any movement of message, graphics or caricature,
except for an electronic digital clock or a thermometer that is permitted
to change when time elapses in minutes and hours or temperature changes,
respectively.
D.
Signs shall be directly related to the use(s) of or the business(es)
operating on the premises on which the signs are located.
E.
Illumination of signs:
(1)
Illuminated signs shall be arranged in a manner to prevent any light
or glare from shining or reflecting upon any street, sidewalk, or
adjacent property and from creating any sky glow.
(2)
Plastic backlit signs must illuminate the lettering or symbols, and
not more than 1/2 the normal intensity of letters and symbols shall
illuminate the background material. If the background material is
clear, white or of an opaque color, no more than 1/4 of the normal
intensity of the letters and symbols shall illuminate the background
material.
(3)
No exterior light shall exceed 100 watts. The use of mercury vapor
lighting is prohibited.
(4)
Light emission from any sign lighting shall not exceed one footcandle
at a distance of two feet from the sign surface.
(5)
For internally illuminated signs, at least 75% of the background
around the letters and any logo on the sign shall be opaque and shall
not be illuminated. Dark, opaque backgrounds with light-colored lettering
or symbols that are backlit are preferred to minimize detrimental
effects.
(6)
For externally illuminated signs, lighting shall be provided either
from below the sign by ground-mounted lights or from above the sign
by lights attached to the top of the sign. In the case of externally
illuminated facade-mounted signs, lighting shall be attached to the
facade and may be provided either above or below the sign. In the
case of externally illuminated projecting signs, lighting shall be
attached to the facade or the projecting pole or structure that supports
the sign. The lights shall be focused directly and completely onto
the sign face, with appropriate and necessary shielding on the top,
sides, and, if necessary, bottom of the fixture to prevent any sight
of the light source from any street, sidewalk or neighboring property.
(7)
Electronic digital signs (EDS). Maximum illumination:
(a)
Illumination measurement criteria. The illumination of an EDS
shall be measured with an illumination meter set to measure footcandles
accurate to at least two decimals. Illuminance shall be measured with
the EDS off, and again with the EDS displaying a white image for a
full color-capable EDS, or a solid message for a single-color EDS.
All measurements shall be taken as close as practical to a perpendicular
plane of the center midpoint of the sign from a level at least five
feet above the ground level at the distance determined by the total
square footage of the EDS as shown in the table Sign Area versus Measurement
Distance. Before an EDS is approved for permanent operation, applicants
shall submit to the Zoning Officer for their review and approval a
report that provides the results of measuring the illumination of
the installed EDS. The report shall indicate the preparer of the report
and his/her professional qualifications, the persons measuring the
illumination of the EDS and their professional qualifications, the
equipment used to measure the illumination, the methodology for measuring
the illumination, and the results of measuring the illumination of
the EDS. The report may be submitted by the sign company that erected
the sign.
 |
|
Source: Night-time Brightness Level Recommendations for On-Premise
Electronic Message Centers. International Sign Association. August
2016.
|
(b)
EDS illumination limits. The difference between the off- and
solid-message measurements using the EDS measurement criteria shall
not exceed 0.3 footcandle at night.
(c)
Dimming capabilities. All permitted EDSs shall be equipped with
a sensor or other device that automatically determines the ambient
illumination and programmed to automatically dim according to ambient
light conditions, or that can be adjusted to comply with the 0.3 footcandle
measurements.
(8)
Back-lit channel letter sign. These signs are illuminated by light-emitting
diodes (LED) behind the elements to create a visual halo appearance
of the three-dimensional elements on the wall or facade. The maximum
illumination of back-lit channel letters signs shall comply with the
maximum illumination of EDSs set forth in this section.
F.
Signs permitted by this section shall be constructed of durable materials
and must be kept in good condition and repair. All signs shall be
periodically maintained by the owner of said sign, including painting,
repairing and cleaning as necessary. Any sign that, because of improper
maintenance, is deemed by the enforcing authority to be in a state
of disrepair, such that the sign is no longer functional, visible
or is dangerous to the safety of others, shall be repaired by the
owner of said sign within 14 days of notice, indicating the requirement
of said repair; otherwise, the sign shall be removed.
[Added 3-22-2021 by Ord. No. 2021-3[1]]
A.
Prohibited signs.
(1)
Signs not expressly permitted by this section shall be prohibited,
except for signs approved by variance and preexisting nonconforming
signs as regulated in this section.
(2)
Signs that impede or interfere with the operation of a traffic signal,
traffic signage, and traffic control devices or of a roadway, sidewalk
or pathway, and with the general vision and safety of motorists, pedestrians
and bicyclists shall be prohibited. Any sign deemed by the enforcing
authority to be a hazard to traffic operations shall be removed by
the owner of said sign within 14 days of notice.
(3)
Signs with visual flashing or physically moving parts, fixtures or
caricatures shall be prohibited. Electronic digital signs with moving
messages, graphics or caricatures shall be prohibited, except for
an electronic digital clock or a thermometer that is permitted to
change when time elapses in minutes and hours or temperature changes,
respectively. Messages displayed on electronic digital signs may be
revised on a daily basis, such as modifying motor vehicle prices for
gasoline service stations, but shall not have movement of any kind
when displayed.
(4)
Billboard signs shall be prohibited.
(5)
Roof signs shall be prohibited.
(6)
Marquee signs shall be prohibited.
(7)
Signs that are unrelated to the use of or a business located on specific
premises shall be prohibited. Off-premises signs for businesses shall
be prohibited.
(8)
Signs painted on or attached to trees, fence posts, stumps, retaining
walls, utility poles, traffic signal poles, and traffic directional
and identification signs shall be prohibited. The exception to this
prohibition is the posting of signs forbidding trespassing, hunting,
fishing or trapping as regulated in this section.
(9)
Signs painted directly on building facades and walls shall be prohibited.
(10)
Signs other than official traffic control signs and devices
in public rights-of-way shall be prohibited.
(11)
Signs that simulate official, directional or warning signs erected
by governmental agencies, such as the New Jersey Department of Transportation
and the County of Burlington, shall be prohibited.
(12)
Series of two or more signs placed in a parallel line to carry
a single advertising message shall be prohibited.
(13)
Portable and temporary signs shall be prohibited, except for
such signs that are permitted in this section.
B.
Nonconforming signs.
(1)
Continuance. Except as otherwise provided in this section, the lawful
use of any sign existing at the date of adoption of this chapter may
be continued, although such sign does not conform to the regulations
specified by this section for said sign, provided that no nonconforming
signs shall be physically enlarged, extended or increased, nor shall
the material, location or illumination of such signs be changed.
(2)
Abandonment. A nonconforming sign shall be considered abandoned when
it is removed or it is completely destroyed.
(3)
Restoration. A nonconforming sign may be restored if it has not been
completely destroyed by an act of God or by forces beyond the control
of the owner, such as an accidental occurrence or action caused by
others. Restoration must occur within 90 days of occurrence.
(4)
Reversion. Once a nonconforming sign has been changed to a conforming
sign, the sign shall be prohibited from being changed back to a nonconforming
sign.
[1]
Editor's Note: This ordinance also repealed former § 540-50,
Signs permitted in all districts.
[Added 3-22-2021 by Ord. No. 2021-3[1]]
A.
Exempt signs. The following exempt signs do not require a sign permit
for erection.
(1)
Political signs that are set back at least five feet from street
right-of-way and property lines, and do not exceed 16 square inches
in area.
(2)
Decorations for officially designated holidays that do not create
a traffic, physical or fire hazard and are removed within 30 days
after the holiday ends.
(3)
Signs for yard or garage sales that do not exceed six square feet
in area and are erected no more than seven days prior to sale and
removed within 48 hours after the sale. One sign shall be limited
to the premises where the yard or garage sale is to occur.
(4)
Real estate signs:
(a)
One real estate sign shall be limited to the premises that is
for sale or for lease.
(b)
Real estate signs shall be removed within seven days of the
sale or lease of the premises.
(c)
Residential use. Signs shall not exceed six square feet in area
and three feet in height, and are located within street right-of-way
and property lines.
(d)
Nonresidential use. Signs shall not exceed six square feet in
area and four feet in height, and are set back at least five feet
from the street right-of-way and property lines.
(5)
Contractor and artisan signs that do not exceed six square feet in
area and four feet in height, are set back at least five feet from
the street right-of-way and property lines, and are removed within
seven days of completion of services rendered. One sign shall be limited
to the premises on which the services are to be rendered.
(6)
Construction site signs limited to one sign per lot. Such signs shall
not exceed six square feet in area and four feet in height, are set
back at least five feet from the street right-of-way and property
lines, and are removed within 10 days of when the building located
on the lot receives a certificate of occupancy. One sign shall be
limited to the lot where the construction is to occur.
(7)
Signs forbidding trespassing, hunting, fishing or trapping that are
replaced annually, commencing January 1 and ending December 31 of
the calendar year.
(8)
Signs advertising a sale or event for charitable purposes that do
not exceed 24 square feet in area and six feet in height, are set
back at least 10 feet from street right-of-way and property lines,
are erected no more than 20 days prior to the sale or event, and are
removed within two days after the sale or event ends. One sign shall
be limited to the premises where the sale or event is to occur.
(9)
Nameplate and number plate signs identifying residents/residences:
one freestanding sign that does not exceed one square foot in area
and four feet in height and is located within the property lines of
the premises on which the residence is located; and one wall-mounted
sign that does not exceed 50 square inches attached to the residence.
(a)
When a residence contains a home professional occupation use,
one freestanding sign, which replaces the one freestanding nameplate
and number plate sign, shall be permitted, provided the home professional
occupation sign does not exceed two square feet in area and four feet
in height and is located within the property lines of the premises
on which the residence is located.
(10)
Official governmental signs.
B.
Temporary signs.
(1)
Exempt signs indicated in § 540-51A(1) through (8) are temporary signs.
(2)
Portable signs. Portable signs for businesses that advertise grand
openings, sales and special events shall comply with the following
requirements:
(a)
A sign permit shall be required for portable signs. A maximum
of three portable sign permits shall be approved per year for a business.
(b)
Portable signs shall not be displayed for more than 60 days
per permit.
(c)
A maximum of three portable signs shall be allowed per permit,
except in lieu of the three portable signs a maximum of five flag
banners, which shall not exceed 12 feet in height, shall be allowed
per permit.
(d)
Portable signs shall be located within the property line of
the premises on which the event occurs and shall not obstruct the
vision of motorists, pedestrians and bicyclists, nor shall they impede
the traffic of motor vehicles, pedestrians and bicyclists.
(e)
The maximum size of non-flag banner portable signs shall comply
with the following requirements by zoning district:
[1]
TCD Zoning District, TCM1, TCM3-C1, TCM3-C2, TCM3-RH and TCO
areas: Each sign shall not exceed 30 square feet in area and six feet
in height.
[2]
TCD Zoning District, TCM-2, TCVO and TCC areas: Each sign shall
not exceed 42 square feet in area and eight feet in height.
[3]
CH, BP and PO Zoning Districts: Each sign shall not exceed 50
square feet in area and 10 feet in height.
[4]
R-PRC Zoning District, commercial component: Each sign shall
not exceed 42 square feet in area and eight feet in height.
(f)
Portable signs for charitable purposes. Portable signs advertising
a sale or event for charitable purposes shall comply with the following
requirements:
[1]
One sign shall be permitted per sale or event.
[2]
The sign shall not exceed 24 square feet in area and six feet
in height.
[3]
The sign shall be set back at least 10 feet from street right-of-way
and property lines.
[4]
The sign shall be erected no more than 20 days prior to the
sale or event and shall be removed within two days after the sale
or event ends.
[5]
Portable signs for charitable purposes shall be permitted in
all zoning districts.
[1]
Editor's Note: This ordinance also repealed former § 540-51,
Signs permitted in residential and agricultural districts, as amended 9-23-1986 by Ord. No. 1986-18; 11-28-2011 by Ord.
No. 2011-13; and 9-24-2012 by Ord. No. 2012-11.
[Added 3-22-2021 by Ord. No. 2021-3[1]]
A.
Residential and agricultural zoning districts.
(1)
Exempt signs set forth in § 540-51A shall be permitted in all residential and agricultural zoning districts.
(2)
Sign for places of worship. A sign that does not exceed 10 square
feet in area and five feet in height, and is set back at least five
feet from street right-of-way and property lines. One freestanding
sign shall be permitted for each place of worship. The sign may contain
a changeable message component that contains attachable physical letters
and numbers or an electronic digital sign.
(3)
Sign for farms and farm stands. A sign that does not exceed 30 square
feet in area and six feet in height, and is set back at least 10 feet
from street right-of-way and property lines. One freestanding sign
shall be permitted for each farm or farm stand, and for circumstances
where the farm and farm stand are located on the same premises, one
freestanding sign shall be permitted.
(4)
Signs permitted in residential zoning districts R-A, ACR, R-L, R-M, CNS and CLR. Exempt signs set forth in § 540-51A.
(5)
Signs permitted in residential zoning districts R-H and R-1B.
(a)
One development sign at the main entrance to the development,
provided it does not exceed 20 square feet in area and five feet in
height and is set back at least 10 feet from street right-of-way and
property lines. Incidental decorative elements such as walls and fencing
may be included, provided the total length of the sign structure does
not exceed 15 feet.
(6)
Signs permitted in the residential component of the residential zoning
district R-PRC.
(a)
One development sign located at each entrance to the development,
provided each sign does not exceed 35 square feet in area and five
feet in height and is set back at least 10 feet from the street right-of-way
and property lines. Incidental decorative elements such as walls and
fencing may be included, provided the total length of the sign structure
does not exceed 15 feet.
(7)
Signs permitted in the TCR Town Center Single-Family Residential Overlay Zone of the TCD Town Center District. Exempt signs set forth in § 540-51A.
(8)
Signs permitted in the TCM3-RH Overlay Zone.
(b)
One development sign at the main entrance to the development,
provided it does not exceed 20 square feet in area and five feet in
height and is set back at least 10 feet from street right-of-way and
property lines. Incidental decorative elements such as walls and fencing
may be included, provided the total length of the sign structure does
not exceed eight feet.
(9)
Signs permitted in the residential components of the TCM1, TCM2,
TCM3-C1, TCO, TCVO and TCC Mixed Use Overlay Zones of the TCD Town
Center District.
(a)
Signs for mixed-use buildings as permitted in § 540-99A(2).
[2]
One development sign at the main entrance to the development
of mixed-use buildings, provided it does not exceed 30 square feet
in area and five feet in height and is set back at least 10 feet from
street right-of-way and property lines. Incidental decorative elements
such as walls and fencing may be included, provided the total length
of the sign structure does not exceed eight feet.
(b)
Residential conditional uses set forth in § 540-99A(9)(a) through (c). Exempt signs set forth in § 540-51A.
(10)
Signs permitted in the residential component of the Eastampton
Town Center: Phase Two Redevelopment Plan adopted December 12, 2011
(Ordinance 2011-14), for the TCM3-C1 Overlay Zone of the TCD Town
Center District.
(b)
One development sign at the main entrance to the development
of mixed-use buildings, provided it does not exceed 30 square feet
in area and five feet in height and is set back at least 10 feet from
street right-of-way and property lines. Incidental decorative elements
such as walls and fencing may be included, provided the total length
of the sign structure does not exceed eight feet.
(11)
Signs permitted in the residential component of the Eastampton
Village Center Redevelopment Plan adopted June 25, 2012 (Ordinance
2012-6), for the TCO Overlay Zone of the TCD Town Center District.
(b)
One development sign at the main entrance to the development
of mixed-use buildings, provided it does not exceed 30 square feet
in area and five feet in height and is set back at least 10 feet from
street right-of-way and property lines. Incidental decorative elements
such as walls and fencing may be included, provided the total length
of the sign structure does not exceed eight feet.
B.
Nonresidential zoning districts.
(2)
A nonresidential building fronting along the corner of two public
streets shall be permitted to have one facade-mounted sign for each
street frontage and, for zoning districts that permit awning signs
and window or door signs, shall be permitted to have one awning sign
and one window or door sign for each street frontage.
(3)
Service entrance signs that do not exceed two square feet in area
shall be permitted in all nonresidential zoning districts.
(4)
Signs permitted in the CH and BP Zoning Districts.
(a)
Freestanding monument and pylon signs identifying businesses.
[1]
Maximum height of the sign shall be 15 feet.
[2]
Maximum area of the sign shall be 100 square feet.
[3]
Minimum setback from the street right-of-way and property lines
shall be 10 feet.
[4]
A maximum number of signs shall be one regardless of the number
of occupants of the premises. For multiple occupants, the sign may
display each occupant.
[5]
The sign may be externally or internally lit, and may contain
an electronic digital sign component.
(b)
Facade-mounted signs.
[1]
The sign shall be attached to the front facade of the building
and shall not project outward from the facade wall more than eight
inches.
[2]
A maximum of one sign per business shall be permitted.
[3]
Maximum area of each facade sign shall not exceed 10% of the
area of the facade of the building on which the sign is attached or
100 square feet, whichever is less.
[4]
The sign may be externally or internally lit.
(c)
Directory signs.
[1]
The sign shall be attached to the facade of the building located
next to the building entrance and shall not project outward from the
facade wall more than six inches. The sign shall be visible at eye
level to pedestrians entering the building.
[2]
Maximum area of the sign shall be three square feet, with each
occupant limited to one square foot of the sign area.
(5)
Signs permitted in the PO Zoning District.
(a)
Freestanding monument and pylon signs identifying businesses.
[1]
Maximum height of the sign shall be 10 feet.
[2]
Maximum area of the sign shall be 50 square feet.
[3]
Minimum setback from the street right-of-way and property lines
shall be 10 feet.
[4]
A maximum number of signs shall be one, regardless of the number
of occupants of the premises. For multiple occupants, the sign may
display each occupant.
[5]
The sign may be externally or internally lit, and may contain
an electronic digital sign component.
(b)
Facade-mounted signs.
[1]
The sign shall be attached to the front facade of the building
and shall not project outward from the facade wall more than eight
inches.
[2]
A maximum of one sign per business shall be permitted.
[3]
Maximum area of each facade sign shall not exceed 5% of the
area of the facade of the building on which the sign is attached or
50 square feet, whichever is less.
[4]
The sign may be externally or internally lit.
(c)
Directory signs.
[1]
The sign shall be attached to the facade of the building located
next to the building entrance and shall not project outward from the
facade wall more than six inches. The sign shall be visible at eye
level to pedestrians entering the building.
[2]
Maximum area of the sign shall be three square feet, with each
occupant limited to one square foot of the sign area.
(6)
Signs permitted in the nonresidential component of the residential
zoning district R-PRC.
(a)
Freestanding monument and pylon signs identifying businesses.
[1]
Maximum height of the sign shall be eight feet.
[2]
Maximum area of the sign shall be 50 square feet.
[3]
Minimum setback from the street right-of-way and property lines
shall be 10 feet.
[4]
A maximum number of signs shall be one, regardless of the number
of occupants of the premises. For multiple occupants, the sign may
display each occupant.
[5]
The sign may be externally or internally lit, and may contain
an electronic digital sign component.
(b)
Facade-mounted signs.
[1]
The sign shall be attached to the front facade of the building
and shall not project outward from the facade wall more than eight
inches.
[2]
A maximum of one sign per business shall be permitted.
[3]
Maximum area of each facade sign shall not exceed 5% of the
area of the facade of the building on which the sign is attached or
50 square feet, whichever is less.
[4]
The sign may be externally or internally lit, or have backlit
channel letters.
(c)
Directory signs.
[1]
The sign shall be attached to the facade of the building located
next to the building entrance and shall not project outward from the
facade wall more than six inches. The sign shall be visible at eye
level to pedestrians entering the building.
[2]
Maximum area of the sign shall be three square feet, with each
occupant limited to one square foot of the sign area.
(d)
Window or door signs.
[1]
Maximum area of window sign shall not exceed 30% of the total
area of the window.
[2]
Maximum area of door sign shall not exceed 10% of the total
glazed area of the door.
[3]
Maximum number of one window sign shall be permitted per business.
[4]
Maximum number of one door sign shall be permitted per business.
(7)
Signs permitted in the nonresidential components of the TCM1, TCM2,
TCM3-C1, TCO, TCVO and TCC Mixed Use Overlay Zones of the TCD Town
Center District, the nonresidential component of the Eastampton Town
Center: Phase Two Redevelopment Plan adopted December 12, 2011 (Ordinance
2011-14), for the TCM3-C1 and TCM3-C2 Overlay Zones of the TCD Town
Center District, and the nonresidential component of the Eastampton
Village Center Redevelopment Plan adopted June 25, 2012 (Ordinance
2012-6), for the TCO Overlay Zone of the TCD Town Center District.
(a)
Freestanding monument and pylon signs.
[1]
Maximum height of the sign shall be eight feet.
[2]
Maximum area of the sign shall be 50 square feet.
[3]
Minimum setback from the street right-of-way and property lines
shall be 10 feet.
[4]
A maximum number of signs shall be one, regardless of the number
of occupants of the premises. For multiple occupants, the sign may
display each occupant.
[5]
The sign may be externally or internally lit, and may contain
an electronic digital sign component that is limited to 50% of the
sign area.
(b)
Facade-mounted signs.
[1]
The sign shall be attached to the front facade of the building
and shall not project outward from the facade wall more than six inches.
[2]
A maximum of one sign per business shall be permitted.
[3]
Maximum area of each facade sign shall not exceed 5% of the
area of the facade of the building on which the sign is attached or
50 square feet, whichever is less.
[4]
The sign may be externally or internally lit, or have backlit
channel letters.
(c)
Directory signs.
[1]
The sign shall be attached to the facade of the building located
next to the building entrance and shall not project outward from the
facade wall more than six inches. The sign shall be visible at eye
level to pedestrians entering the building.
[2]
Maximum area of the sign shall be three square feet, with each
occupant limited to one square foot of the sign area.
(d)
Window or door signs.
[1]
Maximum area of a window sign shall not exceed 25% of the total
area of the window, but shall not exceed a maximum of eight square
feet.
[2]
Maximum area of a door sign shall not exceed 10% of the total
glazed area of the door, but shall not exceed a maximum of four square
feet.
[3]
Maximum height of lettering, numbers or caricatures shall not
exceed 12 inches.
[4]
Maximum number of one window sign shall be permitted per business.
[5]
Maximum number of one door sign shall be permitted per business.
(e)
Projecting signs.
[1]
Maximum area of the sign shall not exceed six square feet.
[2]
Minimum distance from the finished grade of the ground to the
lowest edge of the sign shall be 10 feet.
[3]
Maximum height of the top edge of the sign shall not exceed
the height of the wall from which the sign projects of a single-story
building, or the height of the bottom of the sill of the second-story
window of a two-or-more-story building.
[4]
Maximum width of the sign shall not exceed four feet.
[5]
Maximum distance from the wall of the facade to the edge of
the sign closest to the facade shall be 12 inches.
[6]
Maximum height of the lettering, numbers or caricatures shall
not exceed eight inches.
[7]
Maximum of one sign per business shall be permitted.
[1]
Editor's Note: This ordinance also repealed former § 540-52,
Signs permitted in business districts, as amended 5-12-2003 by Ord. No. 2003-05.
[Amended 11-28-2011 by Ord. No. 2011-13; 3-22-2021 by Ord. No. 2021-3]
B.
All nonexempt portable signs set forth in § 540-51B shall require permits. A permit for nonexempt portable signs shall be valid for 60 days. A maximum of three nonexempt portable sign permits shall be approved per year for a business. No permit application fees shall be required for portable signs for charitable purposes.
C.
Permits shall be required for all nonexempt signs.
D.
It shall be unlawful for any person, business or entity to erect, physically alter, locate or relocate, reconstruct or physically change in any manner, or cause to be erected, physically altered, located or relocated, reconstructed or physically changed in any manner within the limits of the Township of Eastampton any nonexempt sign without first having obtained and having in force and effect a permit for the location of such sign or signs from the Zoning Officer at the sign fee in § 205-3A(8) of Chapter 205, Construction Codes, Uniform.
E.
Any person, business or entity desiring to procure a permit to maintain a sign in the Township of Eastampton shall file with the Zoning Officer a written application, which shall contain an accurate description of the proposed location where said sign is to be erected and a diagram of each sign that the applicant desires to erect, physically alter, locate or relocate, use or maintain. Such application shall be signed by the applicant, who shall also indicate his post office address and supply any and all information that the Zoning Officer may reasonably require in order to properly determine whether the proposed location of the sign complies with the provisions of this chapter. Applications for electronic digital signs and backlit channel signs shall provide the report set forth in § 540-49E(7)(a).
