General sign regulations (applicable to all permanent residential CPDD and NFPDD signs):
(1) 
Only signs that are specifically permitted within this regulation may be displayed. All other signs and types of signs not specifically permitted are forbidden within the CPDD and NFPDD.
(2) 
A sign shall not rotate, gyrate, blink, flash, or move in any fashion.
(3) 
Off-premises signs are not permitted.
(4) 
Roof signs are not permitted.
(5) 
Sign copy on any sign shall be coordinated in size, color and type style.
(6) 
Copy shall be applied in a manner which avoids shadow distortion.
(7) 
Primary attached building identification signs shall be mounted in a position generally centered in position on the building facade. In no case shall a sign extend in height above the horizontal line where the building wall plane intersects the building roof line. When mounted on a parapet, no sign may extend above the parapet wall.
(8) 
Logo symbols shall not exceed the maximum sign height or be 50% greater than the actual letter height; symbols may not be located closer than 1/2 letter height to any building edge, window, door, column, corner, mullion, sign band, canopy or other significant architectural feature. Exceptions may be granted to these size and location requirements when the logo is part of a registered trademark.
(9) 
A sign’s background color shall be limited to one color only.
(10) 
A sign shall not have excessive detail and information which make the sign difficult to read.
(11) 
Copy color shall contrast with the background color.
(12) 
When there are multiple individual identifying business signs on a building (e.g., retail strip center), all signs must be coordinated in size, color and type style.
(13) 
Paint on nonferrous metals shall be a Matthews acrylic polyurethane or equal self-etching primer.
(14) 
Notwithstanding anything contained herein to the contrary, any sign authorized in this article may contain a noncommercial message in lieu of a commercial message.
(Ordinance 2006-017, sec. 152.13(A), adopted 8/1/06)
(a) 
Applicability.
The following residential signs (with their respective governing requirements stated) are permitted in the following zones and within residential developments approved for development in all other CPDD and NFPDD zones:
(1) 
CPDD zones.
(A) 
Town Square Zone (Zone C).
(B) 
Residential Adjacency Zone (Zone D).
(C) 
Old Highway 5 Zone (Zone G).
(D) 
Residential Transition Zone (Zone H).
(E) 
Central Single-Family Preservation Zone (Zone I).
(F) 
Eastern Single-Family Preservation Zone (Zone L).
(2) 
NFPDD zones.
(A) 
Gateway Zone.
(B) 
Old Mill Road Zone.
(b) 
Residential development identification signs.
(1) 
Location.
Must be located at and incorporated as part of the development entry or entries. When constructed on an entry median, must be located so that it does not project into or encroach upon any sidewalk or sidewalk setback. When not on an entry median, these signs may not be built as a separate structure and placed in a location in front of any wall built as part of the development entry.
(2) 
Design.
The sign must be designed so that it is fully integrated with the overall development entry (or multiple entries) design or with a mall design when identifying one development among several when located at or along a common entryway (drive, street, etc.). Signs may be designed to be either part of a development’s entry feature wall, or a detached monument sign placed on an entry median. When designed as a median sign, the sign must not be taller than five (5) feet nor longer than eight (8) feet. Median signs must have a masonry base that is the same predominant building material as that of the development being identified.
(3) 
Lighting.
The sign may be illuminated only with either:
(A) 
Concealed external shielded floodlights; or
(B) 
Halo lighting.
(c) 
Site directional and information signs.
(1) 
Location.
Uniform in selected sites within the development.
(2) 
Design.
Must be of a uniform design throughout the CPDD. Signs must be mounted on a 3-1/2-inch diameter (square cross-section) tubular pole at a uniform height of 6 feet above grade. The poles must be colored dark bronze (and painted with polyester urethane paint).
(3) 
Lighting.
Directional and information signs will not be illuminated.
(Ordinance 2006-017, sec. 152.13(B), adopted 8/1/06)