One-Family Residences
| ||||
---|---|---|---|---|
For Lots Having a Width (In Feet) Greater than but less than
|
Minimum Side Yard (In Feet)
|
Total Both Side Yards (In Feet)
|
Minimum Rear Yard (In Feet)
| |
99
|
150
|
20
|
45
|
20
|
79
|
100
|
15
|
35
|
15
|
59
|
80
|
12
|
30
|
10
|
•
|
Guiding the development of Smithfield Township consistent with
its adopted Comprehensive Plan.
|
•
|
Guiding detailed analysis of parcels to identity the best areas
for development and conservation.
|
•
|
Maintaining the existing landscape character by preserving open
spaces and natural resources.
|
•
|
Preserving scenic views by minimizing views of new development
from existing roads.
|
•
|
Preserving prime agricultural and forest land by concentrating
housing elsewhere.
|
•
|
Providing common open space for recreation by home buyers and,
if necessary, the community.
|
•
|
Providing lot sizes, housing choices and building densities
for all age and income groups.
|
•
|
Providing buffering between residential development and nonresidential
uses.
|
•
|
Minimizing disturbance to the existing environment while accommodating
growth.
|
Provided below is an illustration, followed by the regulations
that shall apply to such development in Smithfield Township:
|
0% to 25% open space
|
No density bonus
|
26% to 30% open space
|
10% density bonus
|
31% to 35% open space
|
15% density bonus
|
36% to 40% open space
|
20% density bonus
|
41% to 45% open space
|
25% density bonus
|
46% to 50% open space
|
30% density bonus
|
50% + open space
|
35% density bonus
|
This shall not, however, preclude smaller lots for purposes
of conveying title to individual property interests under condominium
ownership where these development standards are otherwise met. A mix
of lot sizes will be encouraged and up to 20% may consist of lots
of 10 acres or more that shall be counted as open space for density
calculation purposes, if deed restricted from further subdivision.
Such lots shall not represent more than 50% of the open space, however,
and shall be contiguous to such open space. Yard requirements may
also be reduced, but in no instance to less than 20 feet for the front
yard and 10 feet for the side and rear yards, except in instances
where zero lot line development is proposed with compensating yards
on the opposite side. Notwithstanding these yard requirements, however,
all principal structures shall be separated by a distance of at least
40 feet. Also, no more than 35% of any given acre shall be covered
with impervious surface in the form of access drives, parking areas
or structures.
|
Buffer Planting Requirements
| ||
---|---|---|
Plant types
|
Size
|
Plant Quantities Required
|
Evergreens
|
6 to 7 feet in height; 3 to 3 1/2 inches caliper
|
1 evergreen per 20 feet of buffer
|
Shade trees
|
|
1 shade tree per every 3 evergreens, or approximately 1 per
60 feet of buffer length
|
Ornamental Flowering Trees
|
8 to 10 feet in height; 2 1/2 inches caliper
|
1 flowering tree per every 3 evergreens, or approximately 1
per 60 feet of buffer length
|
Shrubs
|
Minimum 4 feet in height
|
5 shrubs for every 1 evergreen or approximately 1 per 4 feet
of buffer length
|
INTENSITY LEVEL NITS
| ||
---|---|---|
COLOR
|
DAYTIME
|
NIGHTTIME
|
Red Only
|
3,150
|
1,125
|
Green Only
|
6,300
|
2,250
|
Amber Only
|
4,690
|
1,675
|
Full Color
|
7,000
|
2,500
|
Smithfield Township Zoning Ordinance § 27-504, Schedule of Sign Regulations - Regional Shopping Centers
| ||||||||
---|---|---|---|---|---|---|---|---|
Sign Type
|
Description and Maximum No. of Signs
|
Maximum Sign Area
|
Maximum Sign Height
|
Copy Permitted
|
Illumination Permitted
|
Minimum Setbacks
|
Minimum Landscape Requirements
|
Other Requirements
|
Center Identification Pylon (See Figure 1 Illustration)
|
1 pylon sign
|
150 square feet per face, 2 faces maximum
|
15 feet
|
1-Name of center
2-Center logo
3-Up to 3 tenant names
|
1-Internal
2-External, if shielded to prevent glare
|
15 feet from right-of-way, outside sight triangle of any intersection
|
1-Compliance with PennDOT regulations
2-Design compatible with architectural/site features
3-Durable materials (no low gauge sheet metal box signs)
4-Single pole signs not permitted
| |
Center Monument Sign
|
1 monument (ground) sign per vehicular entrance
|
120 square feet per face, 2 faces maximum
|
10 feet
|
1-Name of center
2-Center logo
3-Up to 3 tenant names
|
1-Internal
2-External, if shielded to prevent glare
|
15 feet from right-of-way, outside sight triangle of any intersection
|
100 square feet (See § 27-504, Subsection 1F(6))
|
1-Compliance with PennDOT regulations
2-Design compatible with architectural/site features
3-Durable materials (no low gauge sheet metal box signs)
|
Building Identification Sign (See Figure 3 Illustration)
|
4 signs fitted into architectural elements of major structures
|
100 square feet per face, 4 faces maximum, 1 face per side of
architectural element
|
35 feet
|
1-Name of center
2-Center log
3-Tenant names
4-Building names
|
1-Internal
2-External, if shielded to prevent glare
|
Same as building setbacks
|
None
|
1-Design compatible with architectural/site features
2-Design compatible with pylon and monument signs
3-Scale compatible with that of building element
4-Top of sign shall not extend above building roofline
|
Directional Sign
|
Signs directing pedestrian and vehicular traffic at internal
driveway intersections and aisles
|
6 square feet per face, 4 faces maximum
|
5 feet
|
1-Name of center
2-Center logo
3-Directions (e.g. “one way,” “entrance”
and “exit”)
|
None, but copy may be reflective
|
None
|
None
|
Design compatible with architectural/size features
|
Parking and Aisle Sign
|
Parking and driveway aisle identification signage place on parking
lot light poles
|
6 square feet per face, 4 faces maximum
|
35 feet
|
1-Name of center
2-Center logo
3-Parking lot numbers, colors and names
|
None, but copy may be reflective
|
None
|
None
|
Design compatible with architectural/size features
|
Pathfinder Sign
|
1 sign per 50,000 square feet of gross leasable area or 5 stores,
located at sidewalks or other internal center locations
|
15 square feet per face, 4 faces maximum
|
9 feet
|
1-Name of center
2-Center logo
3-Directions for pedestrians and customers
|
1-Internal
2-External, if shielded to prevent glare
|
None
|
None
|
Design compatible with architectural/size features
|
Service Court Identification Sign
|
1 sign per 30,000 square feet of gross leasable area, located
at store delivery and service area entrances
|
7 square feet per face, 2 faces maximum
|
9 feet
|
1-Name of center
2-Center logo
3-Directions for service and delivery vehicles to service and
delivery areas in center
|
None, but copy may be reflective
|
None
|
None
|
Design compatible with architectural/size features
|
Storefront Wall Sign
|
1 sign per tenant storefront, centered on tenant’s front
store wall, facade or architectural element
|
2 square feet per linear foot of store facade visible, with
width limited to 75% of facade width
|
Limited to height of parapet
|
1-Name of tenant
2-Tenant logo
3-Brand names
|
1-Internal
2-External, if shielded to prevent glare
|
None
|
None
|
1-Design compatible with architectural/site features
2-Copy limited to 36" in height for a single row of letters
and 48 inches if 2 or more rows of copy are utilized
|
Highway Facade Wall Sign Facing Route 209
|
1 sign per store rear wall visible from Route 209, centered
on rear wall, facade, other rear facing wall or architectural element
(maximum of 2 signs)
|
2 square feet per linear foot of store facade visible, with
width limited to 75% of facade width facing Route 209
|
Limited to height of parapet
|
1-Name of store tenant
2-Tenant logo
3-Brand names
|
1-Internal
2-External, if shielded to prevent glare
|
None
|
None
|
1-Compliance with PennDOT regulations
2-Design compatible with architectural/site features
3-Copy limited to 36" in height for a single row of letters
4-Type faces compatible with size and surrounding architecture
|
Highway Facade Wall Sign Facing Route I-80
|
4 signs located on rear store facade walls visible from Route
I-80, one of which shall be limited to naming the center and the exit
|
2 square feet per linear foot of store facade visible, with
width limited to 75% of facade width facing Route I-80
|
Limited to height of parapet
|
1-1 sign limited to naming center and exit 2-3 signs limited
to logos for any 3 tenants
|
1-Internal
2-External, if shielded to prevent glare
|
None
|
None
|
1-Compliance with PennDOT regulations
2-Design compatible with architectural/site features
3-Copy limited to 48" in height
4-Type faces compatible with size and surrounding architecture
|
Blade Sign
|
1 hanging sign per storefront naming the tenant and mounted
perpendicular to the storefront entrance
|
6 square feet per face, 2 faces maximum
|
8 feet, from the sidewalk to bottom of sign
|
1-Name of center
2-Center logo
3-Name of tenant
4-Brand names
|
1-Internal
2-External, if shielded to prevent glare
|
None
|
None
|
1-Design compatible with architectural/site features
2-Copy limited to 48" in height
3-Type faces compatible with size and surrounding architecture
|
Whichever mechanism(s) may be used, the developer shall provide,
to the satisfaction of the Township and prior to the granting of any
final plan approval, for the perpetual maintenance of the open space
and also the use and enjoyment of the recreation area by residents
of the units being approved. No lots shall be sold nor shall any building
be occupied until and unless such arrangements or agreements have
been finalized and recorded.
|
The front yard, side yards, and rear yard shall be kept clear
and unobstructed and shall not be used for the storage or disposal
of any materials, except in approved locations within the PUD, but
shall be screened or landscaped or used for off-street parking and
for loading and unloading in accordance with the purposes of the PUD.
|
Octave Band (cycles per second)
|
Maximum Sound Pressure Level in Decibels (0.0002 dynes per square
centimeter)
|
---|---|
0-74
|
72
|
75-149
|
67
|
150-299
|
59
|
300-599
|
52
|
600-1,199
|
46
|
1,200-2,399
|
40
|
2,400-4,800
|
34
|
Above 4,800
|
32
|