23.1.1
Signs shall be permitted in the various districts as accessory uses in accordance with the regulations contained in this section.
23.1.2
The following name plates and signs shall be permitted in any "R" District:
23.1.2.1
One (1) identification sign per one-family or two-family dwelling, provided such sign does not exceed two (2) square feet in area per face.
23.1.2.2
One (1) identification sign per multiple-family dwelling, provided such sign does not exceed twenty (20) square feet in area per face and has only indirect illumination.
23.1.2.3
One (1) "For Sale" or "For Rent" sign per lot, provided such sign does not exceed six (6) square feet in area per face and is unlighted. Signs are allowed to be placed on seller's property except in the Texas Department of Transportation right-of-way. Signs are not permitted to be placed in the Texas Department of Transportation right-of-way, attached to a utility pole of any kind, to a tree or any other device.
23.1.2.4
One (1) identification sign during the first year of construction of a new subdivision, provided such sign does not exceed one hundred (100) square feet in area per face and is unlighted; or, until all lots are sold.
23.1.2.5
One (1) identification sign per agricultural, mobile home park, public or semi-public use, provided such sign does not exceed thirty-five (35) square feet in area per face and has only indirect illumination.
23.1.3
The following signs shall be permitted in the "B-1" District:
23.1.3.1
All name plates and signs permitted in any "R" District.
23.1.3.2
A limit of four (4) square feet of sign area is permitted for each lineal foot of building frontage for a wall sign attached to the building.
23.1.3.3
Any exterior sign displayed shall pertain only to the use conducted within the building and shall be attached to the wall of the building. All signs with lights shall be shielded to eliminate annoyance to residential areas.
23.1.3.4
Monument signs are ground signs with a width greater than its height made of stone, metal, wood, brick or other materials approved by the building official. A monument sign shall be solid from the ground up, and all poles or supports shall be concealed.
(a)
A single-tenant business shall be allowed one square foot of signage per 50 square feet of total building space, with each business allowed a minimum of 40 square feet of signage and a maximum of 160 square feet, regardless of size.
(b)
A multi-tenant building shall be allowed one square foot of signage per 40 square feet of total building space, with each business allowed a minimum of 50 square feet of signage and a maximum of 160 square feet.
(c)
The maximum sign area on either type of sign is 160 square feet, including the base. The main sign supporting structure may not be visible.
23.1.3.5
Freestanding signs are ground signs with a height greater than its width.
23.1.4
The following signs shall be permitted in any "B-2" or "I" District:
23.1.4.1
All name plates and signs permitted in the "B-1" District.
23.1.4.2
A limit of four (4) square feet of sign area is permitted for each lineal foot of building frontage.
23.1.4.3
Signs shall not extend past the property line.
23.1.4.4
Signs of any type may not be erected upon the roof or go above the roofing of a commercial building.
(Ordinance 1142 adopted 7/25/06; Ordinance 1496 adopted 12/4/2023)