The various districts established by this title and into which the town is divided are designated as follows:
A. 
SF-1 – Single-family residential district, low density;
B. 
SF-2 – Single-family residential district, medium density;
C. 
SF-3 – Single-family residential district, high density;
D. 
MF-1 – Multifamily residential district, medium density;
E. 
MF-2 – Multifamily residential district, high density;
F. 
C-1 – Downtown commercial district;
G. 
C-2 – General commercial district;
H. 
I – Industrial district;
I. 
AP – Aerospace district;
J. 
PUD – Planned unit development district.
(Ord. 94-06 § 2, 1994)
A. 
Adoption. The designation, location and boundaries of the various districts are shown on the official zoning map. The official zoning map is adopted and made part of this title.
B. 
Location – Identification. The official zoning map shall be on file in the public works department office. The map shall be identified by the signatures of the town clerk and town attorney and bears the title, "Town of Eatonville Zoning Map, Ordinance 2011-10."
C. 
Display Zoning Map. In addition to the official zoning map, there may be a display zoning map which may be used to indicate the various districts, but not to locate precise boundaries.
D. 
Amendments. If changes are made in the district boundaries or other matters portrayed by the official zoning map, such changes shall be entered on the official zoning map after the amendment has been approved by the town council. The signature of the town clerk and the town attorney shall be entered on the official zoning map with the ordinance number of the amendment. Each amendment shall be filed as part of the official zoning record.
E. 
Unclassified Property. All property not otherwise classified on the official zoning map shall be treated as follows:
1. 
Interim Zoning. All property not otherwise classified on the official zoning map is hereby placed in an interim zone. Such an interim zone shall be governed by provisions applicable to the SF-1 single-family residential district, low density.
2. 
Upon annexation of property, or upon the town otherwise being made aware of property in the interim zoning designation, the planning director shall commence all necessary steps to zone such property. Interim zoning of property shall be for six months unless otherwise provided by the ordinance.
(Ord. 94-06 § 2, 1994; Ord. 2006-23 § 1, 2006; Ord. 2008-19 § 1, 2008; Ord. 2011-10 § 1, 2011)
Where uncertainty exists as to the boundaries of districts as shown on the official zoning map, the following rules shall apply:
A. 
Boundaries indicated as approximately following the centerlines of streets, highways or alleys shall be construed to follow such lines.
B. 
Boundaries indicated as approximately following platted lot lines shall be construed as following such lot lines.
C. 
Boundaries indicated as approximately following town limits shall be construed as following town limits.
D. 
Boundaries indicated as following railroad lines shall be construed as to be midway between the main tracks.
E. 
Boundaries indicated as following shorelines shall be construed to follow such shorelines, and in the event of change in the shoreline shall be construed as moving with the actual shoreline.
F. 
Boundaries indicated as parallel to or extensions of features indicated in subsections A through E of this section shall be so construed. Distances not specifically indicated on the official zoning map shall be determined by the scale of the map.
G. 
Where physical or cultural features existing on the ground are at variance with those shown on the official zoning map, or in other circumstances not covered by subsections A through E of this section, the planning director shall interpret the district boundaries.
H. 
Where a district boundary line divides a lot which was in single ownership at the time of passage of the ordinance from which this title is derived, the planning director may permit the extension of the regulation for either portion of the lot not to exceed 50 feet beyond the district line into the remaining portion of the lot.
(Ord. 94-06 § 2, 1994)
Except as otherwise provided in this title:
A. 
No building or part thereof or other structure shall be erected, altered, added to or enlarged, nor shall any land, building, structure or premises be used, designated or intended to be used for any purpose or in any manner other than is included among the uses listed in this title as permitted in the district in which such building, land or premises are located.
B. 
No building or part thereof or structure shall be erected, reconstructed or structurally altered to exceed in height the limit designated in this title for the district in which such building is located.
C. 
No building or part thereof or structure shall be erected, nor shall any existing building, be altered, enlarged or rebuilt or moved into any district, nor shall any open space be encroached upon or reduced in any manner, except in conformity to the yard, building site area and building location regulations designated in this title for the district in which such building or open space is located.
D. 
No yard or other open space provided about any building for the purpose of complying with provisions of this title shall be considered as providing a yard or open space for any other building, and no yard or other open space on one building lot shall be considered as providing a yard or open space for a building on any other building lot.
(Ord. 94-06 § 2, 1994)
In their interpretation and application, the provisions of this title shall be held to be minimum requirements. Where this title imposes a greater restriction than is imposed or required by other rules or regulations or ordinances, the provisions of this title shall control.
(Ord. 94-06 § 2, 1994)