[Amended 7-16-1996 by L.L. No. 11-1996]
It is the intent of the Town Board to promulgate
special standards in order to achieve more openness of development
and to reduce the amount of public streets in the rugged areas of
the Town. In the R1-80 and R1-40 Residence Districts, the Planning
Board is hereby authorized to approve subdivision plats containing
lots with less than 100 feet of frontage on an existing or proposed
public street, subject to the standards and procedures set forth below.
A. An applicant desiring to use this section shall comply with the procedure set forth in §
300-210 of this article.
B. The preliminary density (lot count) of the parcel shall be determined by use of the density calculation formula found in §
300-211 of this article. The preliminary density shall be divided by two to determine the final density (maximum number of lots) for the parcel.
C. No parcel of land (site) shall be considered for development
pursuant to these special site standards unless the parcel has access
to at least 50 continuous feet of frontage on an existing public street.
D. Only single-family detached dwellings shall be constructed
using these special site standards.
E. The lots approved using these standards need not have
any frontage on an existing or proposed public street.
F. Neither the site, as a whole, nor individual lots
need be connected to a central wastewater treatment facility, common
sanitary sewer system or common water supply system. It is the intent
of this section to allow for individual septic systems and wells to
service individual lots.
G. The minimum lot size permitted by use of these special
site standards is 40,000 square feet in the R1-40 zone and 80,000
square feet in the R1-80 zone.