This chapter shall be known and may be cited as the "Town of Blooming Grove Noise Ordinance."[1]
[1]
Editor's Note: See also Ch. 235, Zoning, § 235-66, Performance standards, for additional provisions relating to noise.
The purpose of this chapter is to prevent the making, creation or maintenance of excessive unnecessary, unnatural or unusually loud noises which are prolonged, unusual and unnatural in their time, place and use and which are a detriment to public health, peace, welfare or good order.
As used in this chapter, unless the context otherwise clearly indicates, the words and phrases used in this chapter are defined as follows:
A-BAND LEVEL
The total sound level of all noise as measured with a sound level meter using the A-weighting network. The unit is the dbA.
AMBIENT NOISE
The all-encompassing noise associated with a given environment, usually being a composite of sounds with many sources near and far.
BAND PRESSURE LEVEL OF A SOUND FOR A SPECIFIED FREQUENCY BAND
The sound-pressure level for the sound contained within the restricted band.
COMMERCIAL PURPOSE
The use, operation or maintenance of any sound amplifying equipment for the purpose of advertising any business or any goods or any services or for the purpose of attracting the attention of the public to or advertising for or soliciting patronage or customers to or for any performance, show, entertainment, exhibition or event, or for the purpose of demonstrating any such sound equipment.
CYCLE
The complete sequence of values of a periodic quantity which occur during a period.
DECIBEL (db)
A unit of level which denotes the ratio between two quantities which are proportional to power; the number of decibels corresponding to the ratio of two amounts of power is 10 times the logarithm to the base 10 of this ratio.
EMERGENCY WORK
Work made necessary to restore property to a safe condition following a public calamity or work required to protect persons or property from an imminent exposure to danger.
FREQUENCY OF A FUNCTION PERIODIC IN TIME
The reciprocal of the primitive period. The unit is the cycle per unit time and shall be specified.
MICROBAR
A unit of pressure commonly used in acoustics and is equal to one dyne per square centimeter.
MOTOR VEHICLES
Include, but not be limited to, minibikes and go-carts.
NONCOMMERCIAL PURPOSE
The use, operation or maintenance of any sound equipment for other than a commercial purpose. "Noncommercial purpose" shall mean and include, but shall not be limited to, philanthropic, political, patriotic and charitable purposes.
PERIODIC QUANTITY
Oscillating quantity, the values of which recur for equal increments of time.
PERIOD OF A PERIODIC QUANTITY
The smallest increment of time for which the function repeats itself.
SOUND-AMPLIFYING EQUIPMENT
Any machine or device for the amplification of the human voice, music or any other sound. Sound-amplifying equipment shall not include standard automobile radios when used and heard only by the occupants of the vehicle in which the automobile radio is installed. Sound-amplifying equipment, as used in this chapter, shall not include warning devices on authorized emergency vehicles or horns or other warning devices on any vehicle used only for traffic safety purposes.
SOUND ANALYZER
A device for measuring the band pressure level or pressure spectrum level of a sound as a function of frequency.
SOUND-LEVEL METER
An instrument, including a microphone, an amplifier, an output meter and frequency weighting networks, for the measurement of noise and sound levels in a specified manner.
SOUND-PRESSURE LEVEL IN DECIBELS OF A SOUND
Twenty times the logarithm to the base 10 of the ratio of the pressure of this sound to the reference pressure, which reference pressure shall be explicitly stated.
SOUND TRUCK
Any motor vehicle, or any other vehicle regardless of motive power, whether in motion or stationary, having mounted thereon or attached thereto any sound-amplifying equipment.
SPECTRUM OF A FUNCTION OF TIME
A description of its resolution into components, each of a different frequency.
A. 
Use of meters and filters. For the purpose of measuring the intensity and frequencies of sound, sound-level meters and octave band filters shall be employed. Sounds of short duration which cannot be measured accurately with the sound-level meter shall be measured with an impact noise filter in order to determine the peak value of the impact.
B. 
Maximum permitted sound-pressure level. The decibels resulting from any activity, whether open or enclosed, shall not exceed at any point on or beyond any lot line, the maximum decibel level for the designated octave band as set forth in the following table, except that, where the lot lies within 200 feet of a residence district, whether within or without the Town, the maximum permitted decibel level at any point on or beyond the district boundary shall be reduced by six decibels from the maximum permitted level set forth in the table, and further, except that such reduction shall also apply to any sound emitted between the hours of 9:00 p.m. and 7:00 a.m., and all day Sunday.
Octave Band
(cycles per second)
Sound-pressure level
(decibels)
0 to 74
66
75 to 149
58
150 to 299
55
300 to 599
50
600 to 1,199
45
1,200 to 2,399
42
2,400 to 4,799
38
4,800 to 20,000
35