For the purpose of this article, the following terms,
phrases, words and their derivations shall have the meanings stated
herein unless their use in the text of this article clearly demonstrates
a different meaning. When not inconsistent with the context, words
used in the present tense include the future, words used in the plural
number include the singular number, and words used in the singular
number include the plural number. The word "shall" is always mandatory
and not merely directory. The definitions below are the same as or
based on corresponding definitions in the New Jersey Pollutant Discharge
Elimination System (NJPDES) rules at N.J.A.C. 7:14A-1.2.
ILLICIT CONNECTION
Any physical or nonphysical connection that discharges domestic
sewage, non-contact cooling water, process wastewater, or other industrial
waste (other than stormwater) to the municipal separate storm sewer
system operated by the Township of Ewing, unless that discharge is
authorized under a NJPDES permit other than the Tier A Municipal Stormwater
General Permit (NJPDES Permit No. NJ0141852). Nonphysical connections
may include, but are not limited to, leaks, flows or overflows into
the municipal separate storm sewer system.
INDUSTRIAL WASTE
Nondomestic waste, including, but not limited to, those pollutants
regulated under Section 307(a), (b), or (c) of the Federal Clean Water
Act [33 U.S.C. § 1317(a), (b), or (c)].
MUNICIPAL SEPARATE STORM SEWER SYSTEM (MS4)
A conveyance or system of conveyances (including roads with
drainage systems, municipal streets, catch basins, curbs, gutters,
ditches, man-made channels or storm drains) that is owned or operated
by the Township of Ewing or other public body and is designed and
used for collecting and conveying stormwater.
NJPDES PERMIT
A permit issued by the New Jersey Department of Environmental
Protection to implement the New Jersey Pollutant Discharge Elimination
System (NJPDES) rules at N.J.A.C. 7:14A.
NON-CONTACT COOLING WATER
Water used to reduce temperature for the purpose of cooling.
Such waters do not come into direct contact with any raw material,
intermediate product (other than heat) or finished product. Non-contact
cooling water may, however, contain algaecides, or biocides to control
fouling of equipment such as heat exchangers, and/or corrosion inhibitors.
PERSON
Any individual corporation, company, partnership, firm, association,
or political subdivision of this state subject to municipal jurisdiction.
PROCESS WASTEWATER
Any water which during manufacturing or processing comes
into direct contact with or results from the production or use of
any raw material, intermediate product, finished product, by-product
or waste product. Process wastewater includes, but is not limited
to, leachate and cooling water other than non-contact cooling water.
STORMWATER
Water resulting from precipitation (including rain and snow)
that runs off the land's surface, is transmitted to the subsurface,
is captured by separate storm sewers or other sewerage or drainage
facilities, or is conveyed by snow removal equipment.