In any new subdivision or land division, the
street layout shall conform to the arrangement, width and location
indicated on the Comprehensive Master Plan and Official Map of the
Village of Cottage Grove. In areas for which such plans have not been
completed, the street layout shall recognize the functional classification
of the various types of streets and shall be developed and located
in proper relation to existing and proposed streets, to the topography,
to such natural features as streams and tree growth, to public convenience
and safety, to the proposed use of the land to be served by such streets
and to the most advantageous development of adjoining areas. The subdivision
or land division shall be designed so as to provide each lot with
satisfactory access to a public street.
A. Collector streets, as hereafter defined, shall be
arranged so as to provide ready collection of traffic from residential
areas and conveyance of this traffic to the major street and highway
system and shall be properly related to special traffic generators
such as schools, churches and shopping centers and other concentrations
of population and to the major streets into which they feed.
B. Minor streets, as hereafter defined, shall be arranged
to conform to the topography, to discourage use by through traffic,
to permit the design of efficient storm and sanitary sewer systems
and to require the minimum street area necessary to provide safe and
convenient access to abutting property.
C. Proposed streets shall extend to the boundary lines
of the subdivision or land division unless prevented by topography
or other physical conditions or unless, in the opinion of the Village
Board, such extension is not necessary or desirable for the coordination
of the layout of the subdivision or land division or for the advantageous
development of the adjacent tracts.
D. Reserve strips shall not be provided on any plat to
control access to streets or alleys, except where control of such
strips is placed with the Village under conditions approved by the
Village Board.
E. Alleys may be provided in commercial and industrial
districts for off-street loading and service access but shall not
be approved in residential districts. Dead-end alleys shall not be
approved and alleys shall not connect to a major thoroughfare.
F. Street names shall not duplicate or be similar to
existing street names, and existing street names shall be projected
wherever possible.
G. To facilitate solar access, streets shall be oriented in a manner
that maximizes the east-west length of blocks to the maximum extent
possible or to within 20º of such orientation. Solar access is
generally greatest when the buildings' longest axis is east to west
and southerly building exposures are maximized. The requirement above
shall not apply where the subdivider demonstrates any of the following:
[Added 6-21-2021 by Ord.
No. 05-2021]
(1) There are other means of assuring solar access to lots in question,
including but not limited to cluster development on large parcels
or through the use of building setback or solar access easements.
(2) Topographic conditions on or surrounding the land being subdivided
make such orientation unreasonable.
(3) The shape and size of the property being subdivided makes such orientation
unreasonable.
(4) Adopted stormwater management plans or policies make such orientation
unreasonable.
(5) Existing or approved future development contiguous to the subject
property make such orientation unreasonable.
(6) Existing street patterns contiguous to the subject property precludes
adequate solar access to the portion in question.
(7) Specific adverse environmental impacts would occur on the site if
such orientation were achieved.
(8) Desirable street circulation patterns require some streets to be
in more of a north-south direction.
Whenever the proposed subdivision or land division
contains or is adjacent to a limited access highway or railroad right-of-way,
the design shall provide the following treatment:
A. When lots within the proposed subdivision or land
division back up on the right-of-way of an existing or proposed limited
access highway or a railroad, a planting strip at least 30 feet in
depth shall be provided adjacent to a part of the platted lots but
shall have the following restriction lettered on the face of the plat:
"This strip reserved for the planting of trees and shrubs, the building
of structures hereon prohibited."
B. Streets parallel to a limited access highway or railroad
right-of-way, when intersecting a major street and highway or collector
street which crosses said railroad or highway, shall be located at
a minimum distance of 250 feet from said highway or railroad right-of-way.
C. Minor streets immediately adjacent and parallel to
railroad rights-of-way shall be avoided, and location of minor streets
immediately adjacent to arterial streets and highways and to railroad
rights-of-way shall be avoided in residential areas.
Streets shall intersect with each other at as
nearly right angles as topography and other limiting factors of good
design permit.
A. The number of streets converging at one intersection
shall be reduced to a minimum, preferably not more than two.
B. The number of intersections along arterials shall
be held to a minimum. Wherever practicable, the distance between such
intersections shall not be less that 600 feet.
C. Property lines at street intersections shall be rounded
with a minimum radius of 15 feet or of a greater radius when required
by the Village Board or shall be cut off by a straight line through
the points of tangency of an arc having a radius of 15 feet.
D. Minor streets shall not necessarily continue across
arterial or collector streets, but if the center lines of such minor
streets approach the major streets from opposite sides within 150
feet of each other, measured along the center line of the arterial
or collector street, then the location shall be adjusted so that the
adjoinment across the major or collector street is continuous and
a jog is avoided.
The widths, lengths and shapes of blocks shall
be suited to the planned use of the land; zoning requirements; need
for convenient access, control or safety of street traffic; and the
limitations and opportunities of topography.
A. Length. Blocks in residential areas shall not as a
general rule be less than 600 feet nor more than 1,500 feet in length
unless otherwise dictated by exceptional topography or other limiting
factors of good design.
B. Pedestrianways of not less than 10 feet right-of-way
width may be required near the center and entirely across any block
over 900 feet in length where deemed essential by the Village Board
to provide adequate pedestrian circulation or access to schools, shopping
centers, churches or transportation facilities.
C. Width. Blocks shall have sufficient width to provide
for two tiers of lots of appropriate depth except where otherwise
required to separate residential development from through traffic.
The width of lots or parcels reserved or laid out shall be adequate
to provide for off-street service and parking required by the use
contemplated and the area zoning restrictions for such use.
The size, shape and orientation of lots shall
be appropriate for the location of the subdivision or land division
and for the type of development and use contemplated. The lots should
be designed to provide an aesthetically pleasing building site and
a proper architectural setting for the buildings contemplated.
A. Side lot lines shall be at right angles to straight
street lines or radial to curved street lines on which the lots face.
Lot lines shall follow municipal boundary lines rather than cross
them.
B. Double-frontage and reverse-frontage lots shall be
prohibited except where necessary to provide separation of residential
development from through traffic or to overcome special disadvantages
of topography and orientation.
C. Access. Every lot shall front or abut on a public street as specified in Chapter
325, Zoning.
D. Area and dimension of all subdivisions and minor subdivisions,
including all plats and certified survey maps, and lot sizes shall
conform to the area and width requirements of the Zoning Code, unless otherwise modified by the provisions of this chapter.
Whenever a tract is divided into large parcels, such parcels shall
be arranged and dimensioned so as to allow redivision of any such
parcels into normal lots in accordance with the provision of this
chapter and the Zoning Ordinance.
[Amended 4-16-2001 by Ord. No. 03-2001]
E. Depth. Lots shall be a minimum average depth of 100
feet. Excessive depth in relation to width shall be avoided and a
proportion of 2:1 shall be considered a desirable ratio under normal
conditions. Depth of lots or parcels reserved or laid out for commercial
or industrial use shall be adequate to provide for off-street service
and parking required by the use contemplated and the area zoning restrictions
for such use.
F. Width of lots shall conform to the requirements of Chapter
325, Zoning.
G. Corner lots shall have an extra width of 10 feet to
permit adequate building setbacks from side streets.
H. No person may record any certified survey map or plat unless they have obtained approval from the Village of an address plan pursuant to Article
I of Chapter
133.
[Added 12-18-2023 by Ord. No. 10-2023]
In the design of the plat or certified survey map, due consideration shall be given to the reservation of suitable sites of adequate area for future schools, parks, playgrounds, drainageways and other public purposes. If designated on the Comprehensive Master Plan, Comprehensive Master Plan Component, Official Map or neighborhood development plan, such areas shall be made a part of the plat as stipulated in Article
IX of these regulations. If not so designated, consideration shall be given in the location of such sites to the preservation of scenic and historic sites, stands of fine trees, marshes, lakes and ponds, watercourses, watersheds and ravines.
The requirements and standards of §§
274-40 through
274-48 of this chapter may be modified by the Village Board for planned unit development provided such proposed developments are zoned planned unit development (PUD) and shall not conflict with other laws or requirements or with the purpose or intent of this chapter and are approved by the Village Board. In addition, continued provision, maintenance and use of open space, recreation areas, services and amenities shall be assured in a manner acceptable to the Village Board.