Before subdividing, the subdivider shall:
A. 
Meet with the planning and zoning commission to discuss the proposed subdivision;
B. 
Present a sketch of the proposed subdivision;
C. 
Reach an agreement as to any requirements and neighboring property relationships;
D. 
Meet with the City council and City engineer concerning proper standards which will be expected;
E. 
Present a sketch of the proposed subdivision to the City council; and
F. 
If the area to be subdivided is also to be annexed to the City, reach an agreement with the City concerning the proposed annexation.
[Amended by Ord. No. 83-78]
After preliminary discussions and agreements with the planning and zoning commission and the City council, the subdivider shall:
A. 
Prepare the preliminary plat as per standards set forth in Article III of this chapter;
B. 
File nine copies of the preliminary plat with the subdivision review committee;
C. 
Make any necessary corrections to the preliminary plat as per review of the subdivision review committee.
Not more than one year after receiving approval of the preliminary plat, the subdivider shall:
A. 
Before filing the final plat, submit a title report from an "abstractor" as defined in Wyoming Statutes, 1977, section 33-2-101, indicating that the subdivider has a fee simple interest in the land which is to be subdivided. Such report shall be filed with the City council;
B. 
Submit the original and five copies of the final plat and final engineering plans, prepared in accordance with Article IV of this chapter, and the estimated cost of the land improvements to the City building inspector, not less than ten days in advance of the date set for City council action. The City building inspector shall disperse these materials as follows: one copy to the City engineer; one copy to the City attorney; one copy to the City council; and one copy to the planning and zoning commission. Planning and zoning commission approval shall not be required before council action. The City engineer and the City council shall approve or disapprove the final plat and final engineering plans. The City council may extend the one year time limit;
C. 
Make arrangements with the City engineer for checking of engineering and improvement data and for the installation of proposed improvements or furnishing of the bonds in lieu of improvement; and
D. 
After having received City council approval, post a guarantee to the City for completion of all land improvements yet remaining to be installed and pay the necessary filing fee. Such plat shall then be signed by all parties as required by this chapter and state law, and the plat shall, within thirty days of approval by the City council, be filed with the county clerk.
[Added by Ord. No. 82-6; amended by Ord. No. 84-38; Ord. No. 96-3]
A. 
A final plat for a minor subdivision or lot split may be approved by the governing body of the City of Evanston by resolution.
B. 
Prior to approval, a sketch plan of the minor subdivision or lot split shall be presented to and reviewed by the subdivision review committee.
C. 
Prior to approval, a final plat of the minor subdivision or lot split, prepared in compliance with the requirements of this chapter, shall be presented to and reviewed by the subdivision review committee.
D. 
A minor subdivision or lot split shall not be required to comply with the requirements of Sections 22-7 and 22-8 nor shall the final engineering plans described by Section 22-9 be required.
Appeal of the decision to disapprove the preliminary plat or final plat or to deny a permit pursuant to section 22-11 shall be to the City council.
If, in its opinion, a preliminary plat contains land which may be needed for a public utility, park, school or other public facility, the planning and zoning commission shall submit copies of the plat to the appropriate public agency for review. The public agency shall have thirty days within which to review the plat and file a report to the commission.