Town of Cornwall, NY
Orange County
By using eCode360 you agree to be legally bound by the Terms of Use. If you do not agree to the Terms of Use, please do not use eCode360.
Table of Contents
Table of Contents
[HISTORY: Adopted by the Town Board of the Town of Cornwall 4-14-1980 by L.L. No. 1-1980. Amendments noted where applicable.]
GENERAL REFERENCES
Unsafe buildings — See Ch. 72.
Fire Prevention and Building Code administration — See Ch. 84.
Zoning — See Ch. 158.

§ 154-1 Purposes.

The Cornwall Town Board enacts this chapter to encourage the proper and safe installation of heating stoves and fireplaces in order to better protect life and property by providing a permit procedure and inspection of the design and installation of heating stoves and fireplaces.

§ 154-2 Applicable regulations.

The Town Board of the Town of Cornwall adopted the New York State Building Construction Code effective in the Town of Cornwall on June 11, 1965.[1]
[1]
Editor's Note: Current regulations are in the New York State Uniform Fire Prevention and Building Code. See Chapter B, Building Construction; Article 10, Heating, Ventilating and Air Conditioning Equipment; Part 1006, Fireplaces and Stoves.

§ 154-3 Compliance required.

Any person, firm or corporation, all hereinafter "the applicant," seeking to install or to have installed a heating stove or fireplace fueled by wood, coal or any other fuel in any building, as the same is defined by the zoning regulations of the Town of Cornwall,[1] within the unincorporated area of the Town of Cornwall, shall comply with the provisions of this chapter.
[1]
Editor's Note: See Ch. 158, Zoning.

§ 154-4 Procedure.

Prior to installing any heating stove or fireplace, the applicant shall submit to the Building Inspector a plan, sketch or drawing illustrating the design and proposed installation of the heating stove or fireplace. If the Building Inspector determines that the proposed installation meets the requirements of the New York State Building Construction Code,[1] he will issue a permit for the installation. After receiving the permit, the applicant must advise the Building Inspector prior to any construction, and the Building Inspector shall make an on-site inspection of the building. Following completion of the installation and prior to the use of the heating stove or fireplace, the applicant shall advise the Building Inspector of completion of construction and the Building Inspector will make a final inspection. If the Building Inspector finds that the installation is in accordance with the New York State Building Construction Code, he will issue a permit to use the heating stove or fireplace.
[1]
Editor's Note: Now see the New York State Uniform Fire Prevention and Building Code.

§ 154-5 Fees.

[Amended 5-14-2012 by L.L. No. 2-2012]
The fee for a permit to install a heating stove or fireplace within the Town of Cornwall pursuant to this chapter shall be established by resolution of the Town Board, and a schedule of fees shall be maintained on file in the office of the Town Clerk.

§ 154-6 Nonliability of Town.

Notwithstanding the issuance of any permits pursuant to this chapter, should a fire occur in a building where a heating stove or fireplace has been installed, the Town of Cornwall shall not be in any way liable for any loss of life or injury to persons or property resulting therefrom.