[Ord. 95-4-18-2, 4/18/1995, § 4-1]
1. 
The purpose of the presubmission sketch plan is to provide an opportunity for the applicant to consult informally with the Plumstead Township Planning Commission before preparing a preliminary and/or final plan and formal application for approval.
2. 
The presubmission sketch plan procedure gives the Township the opportunity to provided informal guidance to the applicant at a stage when potential differences can be easily resolved.
[Ord. 95-4-18-2, 4/18/1995, § 4-2]
1. 
The applicant or his agent shall distribute the required number of prints of the presubmission sketch plan and forms to the Township.
2. 
The plan requirements in §§ 22-403 and 22-404 are not mandatory.
[Ord. 95-4-18-2, 4/18/1995, § 4-3]
It is suggested but not required that the sketch plan show the following:
A. 
Name, address, and telephone number of the owner of record and applicant.
B. 
Name and address of the engineer, surveyor, or person responsible for the plan.
C. 
Zoning requirements, including:
(1) 
Applicable district.
(2) 
Maximum density permitted and proposed density.
(3) 
Lot size and yard requirements.
(4) 
Any variances or special exceptions granted or needed.
D. 
Written and graphic scales (including scale of location map).
E. 
Total acreage of the site.
F. 
Site boundaries.
G. 
Streets on and adjacent to the site.
H. 
Buildings (and their uses), driveways, sewer systems, wells if known, and any other significant features.
I. 
Proposed general lot layout.
J. 
Types of buildings proposed.
K. 
Number of units proposed.
[Ord. 95-4-18-2, 4/18/1995, § 4-4]
It is suggested that the presubmission sketch plan show:
A. 
Name of subdivision or land development.
B. 
Name, address, and telephone number of the owner of record and applicant.
C. 
Name and address of the engineer, surveyor, or person responsible for the plan.
D. 
Zoning requirements, including:
(1) 
Applicable district.
(2) 
Maximum density permitted and proposed density.
(3) 
Lot size and yard requirements.
(4) 
Required and proposed open space and impervious surface ratios.
(5) 
Any variances or special exceptions granted or needed.
E. 
Location map showing relation of site to adjoining properties and streets within 1,000 feet. Scale one inch equals 800 feet.
F. 
North point.
G. 
Written and graphic scales (including scale of location map).
H. 
Total acreage of the site.
I. 
Site boundaries.
J. 
Streets on and adjacent to the site.
K. 
Buildings (and their uses), driveways, sewer lines, sewer system, wells, storm drains, culverts, bridges, utility easements, quarries and other significant man-made features within the site.
L. 
Proposed general street layout.
M. 
Proposed general lot layout.
N. 
Types of buildings proposed.
O. 
Number of units proposed.
P. 
Open space areas.
Q. 
Recreation areas.
R. 
Proposed CBUs and location(s).
[Added by Ord. 2017-01, 5/9/2017]