Developer shall furnish and install a four way
road name sign at every road intersection made by the roads he constructs.
Signs and posts shall conform to the standards established by the
New York State Department of Transportation Manual of Uniform Traffic
Control Devices. (See Figure 17.)
All signs, signals, markings and other control
devices for maintenance and protection of traffic must conform to
the requirements of the New York State Manual of Uniform Traffic Control
Devices.
Roof drains shall in no case be allowed to flow
onto the highway right-of-way. With the approval of the Town Superintendent
of Highways and Town Engineer, in writing, roof drains may be piped
to the roadway stormwater pipe drain to which they shall be connected
on the top only. Such drains must be installed prior to the start
of fine grading of the roadway.
[Added 11-24-2008 by L.L. No. 4-2008]
In general, the purpose of these road specifications
is to provide guidance in the design and construction of safe new
roadways or the improvement of existing roadways, all in accordance
with generally recognized standard highway, engineering and design
principles. If an applicant wishes to propose an alternative highway
design, said applicant shall provide, with the application, properly
prepared plans with calculations and references to generally recognized
highway engineering and design standards, and in full conformance
with the provisions of the New York Highway Law, in which said design
shall be certified by a New York State licensed professional engineer.
Final decisions as to the interpretation or variance of any part of
these streets shall rest with the Town Board, following the recommendation
of the Town Superintendent of Highways.