[Added 8-15-1989 by Ord. No. 05.89]
A.
Minimum gross development area. The minimum gross
development area shall be an area of not less than 20 acres.
B.
Lot area and width. There shall be a lot area of not
less than two acres with minimum lot frontage of 200 feet and minimum
lot coverage of 35%.
C.
Front yard. There shall be a front yard on each street
on which a lot abuts which shall be not less than 50 feet in depth.
D.
Side yard. There shall be side yards which shall be
not less than 15 feet, and if the property abuts a residential property,
then an additional 20 feet to accommodate screens and noise barriers
shall be required.
E.
Rear yard. There shall be a rear yard which shall
be not less than 15 feet, and if the property abuts a residential
property, then an additional 20 feet to accommodate screens and noise
barriers shall be required.
F.
Building area. Not more than 35% of the area of each
lot may be occupied by buildings.
G.
Building height. No building erected shall exceed
40 feet in height.
H.
Notwithstanding the provisions of Subsections A through G hereof, where an entrance door is provided which faces a side yard lot line and there is not provided a structure or dwelling door that is parallel to the street line, the distance from the entrance door facing the side yard lot line shall be equal to the front door depth required in Subsection C. If an additional entrance door is provided which faces the other side yard lot line, that door location in relation to the side yard distance shall be governed by the provisions of Subsection D.
A.
A building may be erected or used and a lot may be
used or occupied for any of the following purposes and no other:
(1)
Light manufacturing.
(a)
Light machinery, such as small parts for automobiles,
small machine parts, cash registers, sewing machines, typewriters,
calculators, computers, other office machines and small electrical
appliances.
(b)
Fabrication of metal products, such as baby
carriages, bicycles, metal furniture, musical instruments and toys.
(c)
Fabrication of paper products, such as bags,
books, boxes, packaging materials, office supplies and toys.
(d)
Fabrication of wood products, such as boats,
boxes, cabinets, furniture and toys.
(e)
Food and associated industries comprising any
of the following: bakeries, bottling of food and nonalcoholic beverages,
food and cereal mixing and milling, food processing, food sundry manufacturing
and ice cream manufacturing.
(4)
Garages.
(a)
Private garage space necessary to store vehicles
associated with businesses operating in this district. All vehicles
shall be stored in closed garages.
(5)
Health center or spa.
B.
Notwithstanding any of the provisions of this article,
all vehicles and storage shall be indoors.
A.
On buildings.
(1)
One sign on each facade of any building showing only
the name of the building or its occupants shall be permitted.
(2)
Signs shall not exceed 15% of the area of the facade
upon which it is placed.
(3)
Signs may be illuminated but not of the flashing or
animated type.
(4)
Signs shall not project more than 12 inches in any
direction from the facade.
B.
Freestanding signs.
(1)
Freestanding signs may be erected to identify permitted
buildings or to identify occupants in a multi-occupant building.
(2)
Freestanding signs shall not exceed an area of 25
square feet on one side.
(3)
Not more than one freestanding sign shall be erected
for each 100 feet of street frontage.
(4)
Freestanding signs may be illuminated but not be of
the flashing or animated type.
A.
Roadways. Roadways shall be a minimum of 50 feet in
width throughout the district and shall be of such construction as
to properly handle vehicles normally using the roads in the Industrial
Park District. Specifications for these roads shall be determined
by the Borough Engineer. A minimum of two entrances and/or exits shall
be provided for access to the district.
B.
Driveways. Driveways shall be sized to accommodate
the size of vehicles using them and also to adequately accommodate
the volume of vehicles likely to be attracted to the site on a daily
basis. Driveway sizes shall be specified by the Borough Engineer.
One driveway shall be provided for a site frontage of 100 feet, two
driveways shall be provided for site frontages of more than 100 to
800 feet. Driveway provisions for site frontages greater than 800
feet shall be specified by the Paulsboro Planning Board on advice
of the Borough Engineer. The Borough Engineer must and shall be involved
in the design of driveways and of the entrance and exit to and from
the Industrial Park District.
A.
Design. Buildings should be of a similar design and
be constructed of the same or similar materials.
B.
Placement. Buildings should be placed upon their site
in such a manner as to provide practical access and to enhance the
site and surrounding buildings as much as possible.
C.
Common areas. Common areas throughout the zone shall
be established. These areas shall be landscaped where possible, and
provisions shall be made to maintain them in proper order.
There shall be one full-size parking space for
each 200 feet of building area.
There shall be noise barriers, buffers and screens
surrounding and around all trash cans, dumpsters and at the property
line of any property which abuts a residential parcel.
That portion of the Zoning Map attached hereto
and made a part hereof, designated as "Addendum A"[1] marked "District IP," presently designated on the Tax
Maps of the Borough of Paulsboro as Block 124, Lots 2 and 10, amends
the Zoning Map to the extent of the boundaries of the districts outlined
therein and shall be rezoned from R-2 Residential to IP Industrial
Park.
[1]
Editor's Note: The Zoning Map and Addendum
A are on file in the office of the Borough Clerk.
This ordinance shall become effective upon final
adoption and publication according to law.