A. 
The preliminary layout and the supporting documents for a proposed subdivision constitute the material to be officially submitted to the Planning Board, and later one copy shall become the official record of the Municipal Clerk. They show the general design of the subdivision and its public improvements so that the Planning Board can indicate its approval or disapproval of the subdivision prior to the time that the final plat, including the design and detailing of the public improvements and utilities, is completed. Approval of the preliminary layout does not constitute an approval of the final plat, nor should it be considered a valid basis for the construction of site improvements or for other commitments which depend upon its design characteristics.
B. 
When revision of the proposed subdivision is required, the preliminary layout shall be revised accordingly so that the files of the Planning Board and other municipal officials will be current.
C. 
The preliminary layout shall serve as a key map to subdivisions subsequently laid out in sections on final plats.
A. 
The submission of the preliminary layout shall consist of the following items:
(1) 
Application for the subdivision of land, Form A-101, three copies.
(2) 
The preliminary layout, six paper prints.
B. 
The subdivider shall file his complete submission of the preliminary layout and his filing fee at the Municipal Clerk's office. A proposed submission which does not include all the required drawings and documents will not be accepted for filing. A submission shall be filed 15 days prior to a meeting date in order to be heard at that particular meeting.
C. 
The Municipal Clerk shall retain one complete set of the preliminary submission for the municipal records. The remainder of the preliminary submission shall be forwarded to the Planning Board, which shall keep the complete Planning Board records pertaining to the subdivision.
D. 
The Planning Board shall take formal action either approving or disapproving the preliminary layout submission, and copies of such action shall be forwarded to the subdivider or his representative who appeared for him and to the Municipal Clerk.
E. 
If the approved preliminary subdivision of land occurs within 500 feet of the municipal boundary, a copy of the preliminary layout shall be sent by the Planning Board Secretary to the appropriate municipal official of the adjoining community, indicating whether the proposed subdivision is in reasonable harmony with its Master Plan. Any written communication will be considered if received prior to the public hearing date on the final plat.
[Amended 6-16-1987 by L.L. No. 6-1987]
The filing fee shall be established by resolution of the Board of Trustees.
Planning Board approval of a preliminary layout submission shall expire six months after the date of such formal action. No Planning Board action will be taken after such expiration until a new application and filing fee are submitted. A waiver for a reasonable period of time may be given in cases of hardship, upon petition to the Planning Board.
A. 
The preliminary layout shall be prepared by a licensed professional engineer and land surveyor and shall provide the information noted in this section.
B. 
The drawing sheet.
(1) 
Size shall be either 20 inches by 20 inches or 20 inches by 40 inches.
(2) 
If more than one sheet is required, a clearly drawn "cut" line shall be shown on both sheets and on the key map.
C. 
Title block.
(1) 
Name of the subdivision, municipality and County in which located.
(2) 
Name of the subdivider.
D. 
Other notations.
(1) 
Name, address, license number and seal of the professional engineer and land surveyor who prepared the drawings.
(2) 
Total acreage for the entire tract and for each zone district within the tract.
(3) 
Total number of proposed lots.
(4) 
Date of original submission and of each subsequent revised submission.
(5) 
Graphic scale of 100 feet equals one inch.
(6) 
True North point and the date taken.
(7) 
Certification by the licensed land surveyor that the topography shown resulted from an actual land survey or aerial survey developed through the process of photogrammetry, and the date of that survey.
(8) 
Offers of cession, statements establishing easements and similar statements should be indicated on the drawing (see § 207-32).
E. 
Key map (inset on preliminary layout).
(1) 
Scale: one inch equals 400 feet.
(2) 
Information:
(a) 
Relationship to the existing highway system and main intersections and Master Plan of streets and highways.
(b) 
Boundary lines: special districts and municipal properties and boundaries.
(c) 
Subdivision streets and blocks, to scale.
(d) 
Cut lines as needed when there are two or more drawings to show the complete subdivision.
F. 
Boundary lines of preliminary layout.
(1) 
Subdivision boundary line (heavy solid line), true bearings and lengths of courses.
(2) 
Boundaries of adjacent properties and property owners' names. Adjacent properties that are part of a recorded subdivision plat may be identified by the subdivision name.
(3) 
Boundaries of zoning districts.
(4) 
Boundaries of special districts.
G. 
Existing site conditions.
(1) 
Topography.
(a) 
For land with an average slope of less than 10%, topographic contours at two-foot intervals referred to the United States Coast and Geodetic Survey datum of mean sea level.
(b) 
For land with an average slope exceeding 10%, topographic contours at not more than five-foot intervals,.
(c) 
Smaller or larger topographic contour intervals, when advisable due to the terrain, may be used after approval by the Planning Board.
(d) 
Contours shall extend 200 feet beyond the subdivision boundary line.
(2) 
Street rights-of-way in the subdivision and within 200 feet of its boundaries.
(a) 
Name.
(b) 
Location and width.
(c) 
Center-line elevations at intersections and other critical points.
(d) 
Typical cross section.
(3) 
Other rights-of-way and easements in the subdivision and within 200 feet of its boundaries.
(a) 
Identification.
(b) 
Location and width.
(c) 
Restrictions on use, if any.
(4) 
Stormwater drains and drainage structures in the subdivision and within 200 feet of its boundaries.
(a) 
Type of structure.
(b) 
Location, invert elevations, gradients and sizes of all drains and of all other structures where applicable.
(5) 
Other utility structures, such as water and gas mains and power lines, in the subdivision and within 200 feet of its boundaries.
(a) 
Location and size or capacity.
(6) 
Marshes, ponds, streams and land subject to periodic or occasional flooding, or similar conditions, in the subdivision and within 200 feet of its boundaries.
(a) 
Location and area covered, indicating apparent high-water level.
(b) 
Water line on date of survey and survey date.
(c) 
Maximum depth of water at critical points.
(7) 
Test hole data.
(a) 
Date, location and graphic representation of findings for all test holes, including groundwater level; one test hole shall be required for each acre of land to be subdivided.
(b) 
Locations shall include critical conditions and areas where drainage structures requiring seepage are to be constructed.
(8) 
Municipal or other public lands, lands designated as parks, open spaces or for some other public use.
(9) 
Buildings and other structures located in the subdivision and within 200 feet of its boundaries.
H. 
Proposed site conditions (see Article VII, Design Standards).
(1) 
Streets.
(a) 
Name (to be checked with the Municipal Clerk prior to submission).
(b) 
Right-of-way width.
(c) 
Tentative center-line elevations at intersections and at principal changes in gradient.
(d) 
Tentative center-line gradient shown as percent of slope.
(2) 
Lot layout.
(a) 
Lot lines and dimensions to the nearest foot.
(b) 
Building setback lines (dashed) and dimensions.
(c) 
Easements and restricted areas, with notation as to purpose and restriction.
(d) 
Identification of lots or parcels for special uses, whether they are to be offered for cession or not.
(e) 
Layout (dash-dotted) for all reserved parcels in conformance with existing zoning regulations.[1]
[1]
Editor's Note: See Ch. 240, Zoning.
(3) 
Preliminary stormwater drainage system plan.
(a) 
Stormwater sewers and drainage structures.
(b) 
Open drainage lines (watercourses and ditches).
(c) 
Outline of watersheds tributary to stormwater drains, drainage structures and open drainage lines, and their approximate area in acres, including those that extend beyond the boundaries of the subdivision, shall be shown in red ink on only two copies of the preliminary layout.