This article shall be known and may be cited
as a "Local Law Amending Local Law No. 2-1967 of the Town of Clifton
Park, Entitled 'Local Law Relating to Zoning for the Town of Clifton
Park, Providing for the Creation of a Planned Unit Development District
to be known as "Maxwell Drive PUD."'"
Chapter
208, Zoning, of the Code of the Town of Clifton Park and the Zoning Map of the Town of Clifton Park as set forth therein and made
a part thereof be and the same hereby are amended by changing from
Residential District R-1 and Business Non-Retail B-1 a portion thereof
as hereinafter described and by creating within the boundaries of
said newly described area a planned development district to be known
as "Maxwell Drive PUD."
The area of Maxwell Drive PUD consists of approximately
15.9 acres ("project site") and is bounded and described as follows:
All that tract, piece or parcel of land situate in the Town of Clifton
Park, Saratoga County, New York, comprising an irregular lot lying
northerly of Mooney Way, westerly of Maxwell Drive, and southerly
of Plank Road and Via DaVinci Drive and being more particularly bounded
and described as set forth on Schedule A attached hereto.
Before construction of Maxwell Drive PUD is
started or any building permit is issued relating thereto, final plans
and specifications shall be submitted to and approved by the Town
Planning Board and shall be filed with the Town Clerk.
There shall be one point of ingress and egress
to service the north portion of the Maxwell Drive PUD from Maxwell
Drive. There shall be two points of ingress and egress to service
the south portion of the Maxwell Drive PUD, one from Mooney Way and
one from Maxwell Drive. The road systems that service the Maxwell
Drive PUD shall be privately owned and maintained and meet the standards
and regulations for such roads.
All improvements shall be designed and constructed
pursuant to plans and specifications approved by a duly licensed engineer
or architect and by the Town Planning Board, and when completed and
prior to the issuance of a certificate of occupancy, the duly licensed
architect or engineer shall certify to the Town of Clifton Park that
the improvements were constructed in compliance with the New York
State Building Code. The engineer or architect performing the work
herein described shall be employed by and at the sole expense of the
developer, and all construction, during performance thereof and upon
completion, shall be subject to the inspection and approval of the
Town Building Inspector.
This amendment shall be deemed automatically
revoked and the zoning shall revert to its existing zoning status
as it appears in the Clifton Park Town Code on October 20, 2008, if,
within 36 months from the effective date of this article, commencement
of the construction of dwelling units has not begun or, if after construction
has begun, unless substantial progress continues without undue interruption
thereafter.