[Ord. 518, 9/13/1976; amended by Ord. No. 950-2022, 5/16/2022]
When messages evidencing failure to comply with the operational requirements set forth in §
13-314 are received by the Police Department or the Fire Department and the Borough concludes that the automatic protection device sending such messages should be disconnected in order to relieve the particular Department of the burden of responding to false alarms, the Borough may require that the owner or lessee of the device or his/her representative disconnect the device until it is made to comply with the operational requirements.
[Ord. 518, 9/13/1976; as amended by Ord. 636, 5/23/1989,
§ 1-6; and by Ord. No. 950-2022, 5/16/2022]
For the purpose of enforcing this Part and as a condition of
installing and maintaining an automatic protection device, the owner
or lessee thereof shall register the device and execute a consent,
in such form as may be prescribed by the Borough, which will authorize
the Building Inspector, Codes Official, Borough Police Department
and Borough Fire Department to enter upon a lessee's or owner's premises
within the Borough of Oxford at such reasonable times and upon reasonable
notice to inspect the installation and operation of an automatic protection
device.
[Ord. 518, 9/13/1976]
No person shall conduct any test or demonstration of an automatic
protection device without first obtaining permission from the Police
and Fire Departments. Where the equipment is keyed through an intermediary,
no such permission is necessary unless the alarm or signal is to be
relayed to the Police Department or the Fire Department.