All manufactured homes installed in flood hazard areas shall be installed by an installer that is licensed pursuant to F.S. § 320.8249, and shall comply with the requirements of Chapter 15C-1 FAC and the requirements of this chapter.
All new manufactured homes and replacement manufactured homes installed in flood hazard areas shall be installed on permanent, reinforced foundations that:
A. 
In flood hazard areas (Zone A) other than coastal high-hazard areas, are designed in accordance with the foundation requirements of the Florida Building Code, Residential, Section R322.2, and this chapter.
B. 
In coastal high-hazard areas (Zone V), are designed in accordance with the foundation requirements of the Florida Building Code, Residential, Section R322.3, and this chapter.
All new manufactured homes and replacement manufactured homes shall be installed using methods and practices which minimize flood damage and shall be securely anchored to an adequately anchored foundation system to resist flotation, collapse or lateral movement. Methods of anchoring include, but are not limited to, use of over-the-top or frame ties to ground anchors. This anchoring requirement is in addition to applicable state and local anchoring requirements for wind resistance.
[Amended 7-1-2021 by Ord. No. 2021-03]
All manufactured homes that are placed, replaced, or substantially improved in flood hazard areas shall be elevated such that the bottom of the frame is at or above the elevation required, as applicable to the flood hazard area, in the Florida Building Code, Residential Section R322.2 (Zone A).
[1]
Editor's Note: Former § 108-65, General elevation requirement, and § 108-66, Elevation requirement for certain existing manufactured home parks and subdivisions, were repealed 7-1-2021 by Ord. No. 2021-03.
Fully enclosed areas below elevated manufactured homes shall comply with the requirements of the Florida Building Code, Residential, Section R322, for such enclosed areas, as applicable to the flood hazard area.
Utility equipment that serves manufactured homes, including electric, heating, ventilation, plumbing, and air-conditioning equipment and other service facilities, shall comply with the requirements of the Florida Building Code, Residential, Section R322, as applicable to the flood hazard area.