"R-1A"
|
Single-family Residential District
|
"R-1B"
|
Single-family Residential District
|
"R-1C"
|
Single-family Residential District
|
"R-1D"
|
Single-family Residential District
|
"C-1"
|
Local Commercial District
|
"C-2"
|
General Commercial District
|
"I-1"
|
Light Industrial District
|
"HTCD"
|
High Tech Corridor District
|
"ND"
|
New Development Zoning District
|
|
Face. Thirty-two (32) square feet per face
plus one (1) square foot for every four (4) feet of frontage over
thirty (30) feet on a street frontage to a maximum of sixty-four (64)
square feet.
|
|
Setback. Twenty-five (25) feet from back of
curb.
|
"ND" New Development District Use Matrix
| ||||
---|---|---|---|---|
Property Location
|
Corresponding Zoning District Regulations
| |||
1.
|
Single-Family Residential
(Applicable to those properties along either the east and west
sides of Post Road and the south side of Town Square Avenue in the
vicinity of the intersection of these roadways and not otherwise described
in this matrix)
|
a.
|
"R-1B" Single-Family Residential District
|
Section 405.150
|
b.
|
"R-1C" Single-Family Residential District
|
Section 405.160
| ||
c.
|
"R-1D" Single-Family Residential District
|
Section 405.170
| ||
2.
|
Commercial/Residential Alternative
(Applicable to the southern section of the parcel located at
the intersection of Post Road and Technology Drive with frontage to
both roadways)
|
a.
|
Any residential district as specified in Subsection (D)(1) above
| |
b.
|
"C-1" Local Commercial District
|
Section 405.180
| ||
c.
|
"C-2" General Commercial District
|
Section 405.190
| ||
3.
|
Commercial
(Applicable to the properties on the north side of Town Square
Avenue immediately east of the shopping center and all properties
fronting Technology Drive/I-64 north of Post Road)
|
a.
|
"C-2" General Commercial District
|
Section 405.190
|
b.
|
"C-3" Retail Commercial District
|
Section 405.195
| ||
c.
|
"HTCD" High Tech Corridor District
|
Section 405.210
| ||
4.
|
Public, Institutional, and Parks
(Applicable to those properties along either side of Post Road/Hanley
Road currently used for public, institutional, religious, or parks
and recreation facilities)
|
a.
|
Park or playground
| |
b.
|
Recreational facility
| |||
c.
|
Government facility
| |||
d.
|
Religious institution
| |||
e.
|
Educational facility/institution
|
"ND" New Development District Site Regulations
| ||||||
---|---|---|---|---|---|---|
1.
|
Lot Standards
|
As required by the applicable Corresponding Zoning District Regulations per Subsection (D) above.
| ||||
2.
|
Yard and Setback Requirements
|
As required by the applicable Corresponding Zoning District Regulations per Subsection (D) above.
| ||||
3.
|
Height Requirements
|
As required by the applicable Corresponding Zoning District Regulations per Subsection (D) above.
| ||||
4.
|
Off-street parking and loading
|
a.
|
Off-street parking and loading shall be provided in compliance with the requirements of Article XI of Chapter 405 of this Code; provided, however, that the shared parking reductions set forth under Subsection (E)(4)(b) and (c) of this Section may be approved as part of the approval of an Area Plan pursuant to Article IV of Chapter 405 of this Code for uses located within 800 feet of the shared parking facility.
| |||
b.
|
Shared parking reductions for different use combinations
|
(1)
|
Joint Office and retail or service uses
|
A maximum 20% reduction in total spaces required.
| ||
(2)
|
Joint Residential and retail or service uses
|
A maximum 30% reduction in the residential parking required.
Restaurant and entertainment venues shall be excluded
| ||||
(3)
|
Joint Residential and office uses
|
A maximum 40% reduction in the residential parking required
| ||||
c.
|
Shared parking reductions for same use combinations
|
(1)
|
4 or more separate establishments of same use
|
A maximum 20% reduction in the total spaces required
| ||
(2)
|
3 separate establishments
|
A maximum 15% reduction in the total spaces required
| ||||
(3)
|
2 separate establishments
|
A maximum 10% reduction in the total spaces required
| ||||
5.
|
Utilities
|
Utilities serving a site and the on-site structures shall be
located underground in easements that can serve multiple properties.
| ||||
6.
|
Landscape Requirements
|
As required by Article IX of this Chapter
| ||||
7.
|
Performance Standards
|
As required by Article XII of this Chapter
| ||||
8.
|
Storm Sewer and Drainage Facilities
|
As required by Chapter 550 of this Code
|
"ND" New Development District Design Standards
| |||||
---|---|---|---|---|---|
1.
|
Building Placement and Orientation
|
a.
|
The main facade of a building must be oriented to face the principal
street on which it has frontage.
| ||
b.
|
Buildings on corner lots must be oriented so that the facade
design is given equal treatment to each street on which it has frontage.
| ||||
c.
|
Buildings should occupy a lot in accord with the standards of
the Corresponding Zoning District Regulations as may be applicable
as set forth in Subsections (D)(1) and (E) above.
| ||||
2.
|
Building Materials
|
a.
|
Building materials should be used and installed in keeping with
the chosen architectural style. Building material colors should be
varied and complementary to each other
| ||
b.
|
Unless modified through Area Plan or Site Plan approval, at
least 70% of each building's facade (not including window and
door openings) should be clad using primary materials as identified
under Subsection (F)(2)(c) of this Section.
| ||||
c.
|
Walls (primary materials)
|
(1)
|
Primary materials include brick, stone, stucco, cast stone,
wood shingle, wood or fiber cement siding.
| ||
(2)
|
EIFS shall also be allowed as a primary material but shall not
be permitted on the ground floor portion of a facade.
| ||||
(3)
|
Tilt-up concrete, or similar, shall be permitted when tinted,
stained, or stamped with a pattern.
| ||||
d.
|
Walls (accent materials)
|
Accent materials include metal panels, decorative concrete masonry
units, architectural cement block, textured concrete panels, glass
block, or any primary materials.
| |||
e.
|
Arches and Piers
|
Shall match or be compatible with wall materials.
| |||
f.
|
Columns and Posts
|
Shall be wood, composite, metal, brick, stone, or cast stone.
| |||
g.
|
Fences
|
(1)
|
Shall be wood boards, composite, vinyl, ornamental iron, decorative
concrete, decorative metal (but not including chain link), masonry,
trellis, lattice, or some combination thereof.
| ||
(2)
|
Bases or columns of stucco, brick, or stone are encouraged.
| ||||
h.
|
Accessory buildings or structures
|
Shall be clad with materials compatible with or matching the
primary building or structure.
| |||
i.
|
Generally unacceptable materials
|
Vinyl or aluminum siding, plywood panels, plexiglass, corrugated
metal, concrete modular block, corrugated tin roof, mirrored glass
on ground floor.
| |||
3.
|
Facade Articulation and Relief
|
a.
|
Each building shall incorporate several common architectural
features, appropriate for the architectural style chosen. Design features
should be used to enhance main facades, especially at building entries.
Windows are key to the overall design of a building and the relationship
between the exterior and interior.
| ||
b.
|
Entrance design requirements
|
Building entrances are required to be clearly delineated and
indicate a clear transition from the exterior to the interior of the
building. Every main entrance to a building is required to have a
special emphasis when compared to the other portions of the building.
| |||
c.
|
Articulation requirements
|
Horizontal and vertical facade variations (depth relief) shall
be required on the first 3 floors of building facade. Above the third
floor, a flat facade design is permitted.
| |||
d.
|
Window requirements
|
At least 50% of the ground floor facade shall be window or door
openings. Clear glass for storefronts, windows, and doors shall be
used for retail type buildings.
| |||
e.
|
Corner requirements
|
Corner lot buildings should include a prominent architectural
feature of greater height than the rest of the roof, or emphasis at
the corner where the 2 public streets meet.
| |||
f.
|
Facade detail examples
|
Pilasters, piers, columns, friezes, cornices, and window surrounds.
| |||
g.
|
Facade relief examples
|
Balconies of various depth, canopies, awnings, covered arcades,
roof overhangs, recesses, and bay windows or similar projections.
| |||
4.
|
Height and Rooflines
|
a.
|
Buildings should have varying roofline elevations to add architectural
interest and avoid the appearance of long, monotonous roofline expanses.
| ||
b.
|
For flat roof designs, a variation such as a parapet or tower
is required every 50 feet of roofline.
| ||||
5.
|
Amenity Areas
|
a.
|
Outdoor seating and gathering areas should be provided for commercial
developments.
| ||
b.
|
Patio and seating areas may be located in required setbacks,
but shall not encroach into required walkways.
| ||||
c.
|
Bicycle racks or parking areas shall be provided adjacent to
entrances. Centralized racks may be located to serve multiple businesses.
| ||||
d.
|
Public art is encouraged to help create an identity for the
"ND" District.
| ||||
6.
|
Sidewalks and Walkways
|
a.
|
Sites and buildings shall be designed to encourage pedestrian
activity and social interaction and create an environment that supports
pedestrian and bicycle access.
| ||
b.
|
Interior sidewalks and walkways shall be a minimum of 5 feet
in width
| ||||
c.
|
Walkways from rear parking areas to the front of lots shall
be a minimum of 10 feet in width.
| ||||
7.
|
Right-of-way and Streetscape
|
d.
|
If a tree lawn and sidewalk are not already located along an
adjacent street, a tree lawn of at least 5 feet in width and a sidewalk
minimum of 5 feet in width shall be constructed along the entire length
of the property line adjacent to the street. For purposes of this
Section, the term "tree lawn" shall mean a narrow band of unpaved
area located between the edge of the street pavement and an adjacent
sidewalk.
| ||
8.
|
Parking and Access
|
a.
|
Parking areas shall be located along the side or rear of buildings.
| ||
b.
|
No direct pull-in, back-out parking spaces shall be permitted
along streets. Parallel parking is allowed.
| ||||
c.
|
Shared access (vehicle ingress/egress) points are encouraged
to reduce the number of curb cuts along streets.
| ||||
9.
|
Screening
|
a.
|
Mechanical equipment and dumpster areas
|
Screening from ground-level view of primary access roads and
residential districts shall be provided for ground-mounted and rooftop
mechanical equipment and dumpster areas.
| |
b.
|
Loading and service areas
| ||||
c.
|
Solid fences or walls compatible in design and color to the
building material and design shall be used.
| ||||
d.
|
Chain link (including cloth, canvas, or slat covered) and wire
fencing shall not be used for screening.
| ||||
10.
|
Lighting
|
a.
|
Proper layout, height, fixture selection, and lighting level
shall be incorporated as part of the Final Plan or Site Plan design
requirements.
| ||
b.
|
Site lighting shall use LED bulb technology of low-intensity
from a concealed source, shall be of a clear white or amber light
that does not distort colors, and shall not spill over onto adjoining
properties, highways, or in any way interfere with the vision of oncoming
motorists. Lighting fixtures shall be of a type capable of shielding
the light source from direct view. The Final Plan or Site Plan, as
applicable, must show the relationship of fixtures and the light patterns
to each other, to the project site, to the development, and the adjacent
rights-of-way.
| ||||
c.
|
Fixtures used to accent architectural features, landscaping
or art shall be located, aimed or shielded to minimize light spillover
onto the surrounding environment.
| ||||
d.
|
Architectural lighting shall be recessed under roof overhangs
or generated from a concealed source, low-level light fixture(s).
Roof lights, lighted roof panels, and other methods of illuminating
buildings, deemed inappropriate, are not allowed.
| ||||
e.
|
Decorative, low-level intensity, non-concealed source lighting
that defines on-site vehicular and/or pedestrian ways are acceptable.
|