The preliminary construction plans shall be
drawn at the same scale as the preliminary plat and shall include
the following information:
A. Location and sizes of any existing water, sewer storm
drainage and other utility lines and structures within and nearby
the proposed subdivision.
B. The proposed system for the provision of water supply
and fire protection facilities, sewage disposal, stormwater drainage,
and other utility services.
C. Proposed street or private road profiles and cross-sections
showing the approximate grade of proposed streets or private roads,
the relationship of existing to proposed grades, and the proposed
grades, and the proposed vertical curvature along the center line
of all new streets or private roads.
D. Location of all existing and proposed monuments and
other subdivision improvements.
E. Such additional information as may be required by
this chapter, the Zoning chapter or the Planning Board.
Final construction plans and profiles shall
be prepared for all proposed streets, private roads and other required
improvements. Plans shall be drawn at the same scale as the final
plat and on the same size sheets, but not on the same sheets. The
following information shall be shown:
A. Plans and profiles showing the location and a typical
cross-section of street and/or private road pavements including curbs
and gutters, sidewalks, manholes and catch basins; the location of
street or private road trees, lighting and signs; the location, size
and invert elevations of existing and proposed sanitary sewers, stormwater
drains and fire hydrants; the location and size of all water, gas
or other underground utilities or structures; and the location and
design of any other required improvements.
B. Profiles showing existing and proposed elevations
along the center line of all streets and private roads. Where a proposed
street or private road intersects an existing street or private road,
the elevation along the center line of the existing street or private
road within 100 feet of the intersection, shall be shown. All elevations
must be referred to established U.S. Government or approved local
benchmarks, where they exist within 1/2 mile of the boundary of the
subdivision.
C. The Planning Board may require, where steep slopes
exist, cross-sections showing existing and proposed elevations of
all new streets and private roads every 100 feet at five points on
a line at right angles to the center line of the street or private
road, said elevation points to be at the center line of the street
or private road, each property line, and points 30 feet inside each
property line.
D. Location, size, elevation and other appropriate description
of any existing facilities which will be connected to proposed facilities
and utilities within the subdivision.
E. Where the design of the subdivision requires the regrading
of land, the regraded contours shall be shown along with estimates
of the quantity of material to be added or removed and the proposed
measures to be implemented by the subdivider to rehabilitate the disturbed
area or areas.
F. Title of all sheets, name, address, signature and
seal of licensed engineer preparing the construction plans, the date
prepared, including revision dates if any, approximate true North
point, scale, and consecutive numbering as sheet _________ of _________.
G. A notation as follows:
|
“All specifications, materials and methods
of construction to be in accordance with the City Construction Standards
and Specifications and with the requirements of the Planning Board
Resolution of Approval dated ________________, 20____.”
|
H. A notation of approval, on all sheets as follows:
|
"Approved by:
|
|
|
|
|
Owner
|
Date
|
|
and
|
|
|
|
|
Planning Board Chairman
|
Date"
|
I. Such additional information as may be required by
this chapter, the Zoning chapter or the Planning Board.