The purpose of the Center Village District is
to protect the present character of the historic village for a mix
of residential, retail, office, and institutional uses in a village
setting, on small lots; and to provide additional regulation of activities
which are likely to cause health, safety, or general welfare problems
on small lots.
The location and boundaries of the Center Village
District are established as shown on the Official Zoning Map and are
a part of this chapter.
[Amended 3-11-1995 ATM by Art. 18; 3-11-2006 ATM by Art. 24; 3-9-2007 ATM by Art. 25]
Except for legal nonconformities, buildings or land used or occupied, lots created, and buildings erected, constructed, reconstructed, moved, or structurally altered, whether requiring a land use permit or not, must comply with the requirements of Articles
XVII and
XVIII (general and specific performance standards) of this chapter and the following dimensional requirements:
A. Minimum lot size.
(1) Single-family dwelling: 32,670 square feet/ 3/4 acre.
(2) Two-family or multifamily dwelling: 32,670 square
feet for the first dwelling unit plus 16,335 square feet for each
additional dwelling unit.
(3) Other allowable uses: 32,670 square feet.
B. Minimum street frontage.
(1) Single-family dwelling: 150 feet.
(2) Two-family or multifamily: 150 feet/principal structure.
(3) Other allowable uses: 150 feet.
C. Minimum yard dimensions.
(1) Setback from street right-of-way on existing streets,
except Route 111: 25 feet or the average setbacks of existing principal
buildings on the two abutting lots, whichever is less.
(2) Setback from street right-of-way on new streets and
Route 111: 50 feet.
(5) Rear and side setback for a nonresidential use abutting
a residential use: 30 feet.
The permitted uses are those indicated in Article
V of this chapter.