Exciting enhancements are coming soon to eCode360! Learn more 🡪
Town of Alfred, ME
York County
By using eCode360 you agree to be legally bound by the Terms of Use. If you do not agree to the Terms of Use, please do not use eCode360.
Table of Contents
Table of Contents
The purpose of the Village District is to provide an area for a variety of residential and commercial uses in a manner appropriate to their location, an area in which the location of public facilities can serve the greatest number of people as economically as possible. The Village District will provide for continuation of a village type development pattern at a density which is lower than the Center Village District. This district will encourage the new development that will take place in Alfred do so in the vicinity of the existing village and within the service areas for water, public safety, and schools. This district will also promote a type of development that fits into the existing characteristics of the location being developed.
The location and boundaries of the Village District are established as shown on the Official Zoning Map and are a part of this chapter.
[Amended 3-11-2006 ATM by Art. 24; 3-9-2007 ATM by Art. 25]
Except for legal nonconformities, buildings or land used or occupied, lots created, and buildings erected, constructed, reconstructed, moved, or structurally altered, whether requiring a land use permit or not, must comply with the requirements of Articles XVII and XVIII (general and specific performance standards) of this chapter and the following dimensional requirements:
A. 
Minimum lot size.
(1) 
Single-family dwelling on all lots legally existing at the date of adoption of this standard, on new lots which front on existing streets, or on lots not served by public water: 87,120 square feet/two acres.
(2) 
Single-family dwelling on lots meeting the following requirements: served by public water, on a new lot, and fronting on a new street built to Town specifications: 43,560 square feet/one acre.
(3) 
Two-family or multifamily dwelling: the required minimum lot size in Subsection A(1) or (2) above for the first dwelling unit plus 50% of that for each additional dwelling unit.
(4) 
Other allowable uses: 87,120 square feet.
B. 
Minimum street frontage.
(1) 
Single-family dwelling on all legally existing lots, on new lots which front on existing streets, or on lots not served by public water: 200 feet.
(2) 
Single-family dwelling on a lot meeting the following requirements: served by public water, on a new lot, and fronting on a new street built to Town specifications: 125 feet.
(3) 
Two-family or multifamily dwelling: 200 feet per structure.
(4) 
Other allowable uses: 200 feet.
C. 
Minimum yard dimensions.
(1) 
Setback from street right-of-way on new or existing streets: 50 feet.
(2) 
(Reserved)
(3) 
Side setback: 25 feet.
(4) 
Rear setback: 25 feet.
D. 
Maximum lot coverage.
(1) 
Residential: 25%.
(2) 
Nonresidential: 25%.
The permitted uses are those indicated in Article V of this chapter.