[Amended 10-27-2010 by Ord. No. 23-2010]
In any MFH Manufactured Home District, the land
buildings or premises shall be used by right only for only one of
the following:
All conditional uses of the A Residence District
shall be allowed, provided that the conditions set forth thereunder
shall be complied with, and further provided that the lot size for
any such conditional use shall not be less than 1/2 acre.
All accessory uses permitted in the A Residence
District shall be allowed.
Area and bulk regulations shall be as follows:
A. Minimum lot size: 5,000 square feet.
B. Minimum lot frontage: 40 feet.
C. Minimum lot depth: 90 feet.
D. Minimum lot width: 50 feet at building.
E. Minimum front setback: 20 feet.
F. Minimum rear setback: 10 feet.
G. Minimum side yards: 10 feet each and 20 feet combined.
I. Maximum coverage: 60% for all lot improvements.
J. These bulk area requirements are for buildings placed
perpendicular to the street. For buildings placed parallel to the
street, the lot depth may be decreased provided that the minimum front,
side and rear yard dimensions are maintained. In no case shall the
minimum lot size be less than 5,000 square feet.
The maximum gross density permitted, including
wetlands, shall not exceed 6.5 units per acre.
The following parking regulations shall apply:
A. A minimum of two off-street parking spaces shall be
provided for each unit.
B. Parking spaces may be located within the side yard
area of each lot, if necessary.
C. Parking stalls shall be 10 feet by 18 feet.
[Amended 10-27-2010 by Ord. No. 23-2010]
D. Garage-driveway combinations count as only 1.75 spaces.
E. Stacked parking, one car in front of the other, count
as only 1.75 spaces for each two stacked.
All setbacks shall be measured from any storm,
sewer or water easement line.