The purpose of this article is to assure that
all signs within the Village of Sagaponack are compatible with its
unique character as described in its Comprehensive Plan and as more
particularly set forth below:
A. To promote the use of signs which are aesthetically
pleasing and of appropriate design and scale so as to be compatible
with surrounding buildings and landscape.
B. To balance public and private objectives by allowing
adequate signage for preexisting business identification.
C. To provide for a reasonable amortization period for
all legally preexisting but noncompliant signage, as recommended by
the Comprehensive Plan.
D. To reduce impacts associated with light pollution
and glare emanating from permitted illuminated signage.
The following terms as used in this article
shall have the following meanings:
ANNOUNCEMENT SIGN
A sign announcing the activities conducted or to be conducted
at the public or semipublic building to which it refers.
AWNING
Any retractable or fixed shade-producing device made of flexible
fabric or similar material covering a rigid skeleton structure attached
to a building.
BANNER or PENNANT
A sign that is painted or displayed on a sheet composed of
fabric, pliable plastic, paper or other nonrigid material, fastened
to the exterior of a building or exterior structure other than a flagpole,
but excluding any flag representing any federal, state or other governmental
entity.
BILLBOARD
A sign relating, in whole or in part, to a business, commodity,
service, entertainment or attraction sold, offered or existing at
a location other than the location where such sign is displayed.
CANOPY
An architectural projection comprised of a rigid structure
over which a covering is attached that provides weather protection,
identity or decoration and is supported at one end by the building
to which it is attached and at the outer end by not less than one
stanchion.
CONSTRUCTION SIGN
A freestanding sign describing construction or development
activity or identifying the entity performing such activity at the
site to which it refers.
CORNER CLEARANCE
The triangular area on a corner lot formed by measuring 50
feet from the intersection of both street side property lines or,
on an interior lot, formed by measuring 20 feet from the intersection
of its street side property line and the adjacent private street or
driveway.
EMBELLISHMENT
Structural or decorative elements or enhancements of a sign
representing significant architectural features of the associated
building or development, but excluding any symbols, logos or lettering
thereon.
FREESTANDING SIGN
A sign detached from any supporting element of a building
and consisting of a double- or single-sided sign face attached to
a single- or double-pole structure embedded in the ground or mounted
on its own self-supporting permanent structure or base. Freestanding
signs include both monument signs and pole signs, which are separately
defined below.
HISTORIC NEON SIGN
A neon window sign in existence since before January 1, 1981,
and not inconsistent with the character of the Village.
ILLUMINATED SIGN
A sign illuminated either internally, where the source of
illumination is inside the sign or from light bulbs or light tubes
affixed or incorporated into the structure thereof, or externally
where the source of illumination is separate from the sign and reflected
off the surface thereof.
MANSARD ROOF
A roof whose pitch has a twelve-inch or greater vertical
projection for each six-inch horizontal projection.
MASTER SIGN PLAN
A specific set of design standards established for the purpose
of unifying a variety of signs associated with a multi-use building
or complex of buildings. The design standards may include, but are
not limited to, letter and logo sizes, letter style, colors, texture,
lighting methods, sign type and architectural features.
MONUMENT SIGN
A freestanding sign where the aggregate width of its supports
is equal to or greater than 40% of the width of the sign itself.
NATURAL GRADE
The highest point of the natural grade of the ground at the
base of a freestanding sign or, in the case of a mansard sign, at
the base of the building to which such sign is affixed.
NEON SIGN
An illuminated sign consisting, in part, of a glass tube
filled with neon, argon, mercury or other gases caused to emit light
by the passage of an electric current and commonly bent into various
forms, or equivalent lighting method or fixture which has the same
appearance or effect as traditional neon.
OBSOLETE SIGN
A sign that no longer directs, advertises or identifies a
legal use, product or activity on the premises where such sign is
displayed.
POLE SIGN
A freestanding sign wholly supported by a single vertical
pole, gate or fence or similar structure embedded in the ground.
POLITICAL SIGN
A nonilluminated sign designed to influence voters or to
express a political opinion.
PROFESSIONAL SIGN
A sign that directs attention to a resident's home, a home
occupation, a home professional office or other permitted nonresidential
use within a residential zoning district and which bears only the
name and profession or occupation of the resident.
PROJECTING OR BLADE SIGN
A sign attached perpendicularly to a building or structure
that projects from and is supported by a wall of such building or
structure.
REAL ESTATE SIGN
A sign advertising the sale, exchange, lease or rental of
the real property on which it is located.
ROOF SIGN
A sign erected upon or above a roof or parapet of a building
or structure.
SANDWICH BOARD
A portable sign capable of standing without support or attachment.
SIGN
Any material, device or structure displaying, or intending
to display, one or more messages visually and used for the purpose
of bringing such messages to the attention of the public, but excluding
any lawful display of merchandise. The term "sign" shall also mean
and include any display of one or more of the following:
A.
Any letter, numeral, figure, emblem, picture,
outline, character, spectacle, delineation, announcement, trademark,
or logo; and
B.
Colored bands, stripes, patterns, outlines or
delineations displayed for the purpose of commercial identification.
WALL SIGN
Any sign mounted on, attached to or incorporated into the
wall, mansard roof or parapet of a building or structure.
WINDOW SIGN
Any sign painted on or affixed to a window or glass door
of a building or placed in the interior of such building within four
feet from the inside surface of such window or door and visible from
the exterior of such building.
For purposes of determining compliance with
the area and height requirements throughout this article, the following
shall apply:
A. Area.
(1) The area of a sign having copy mounted, affixed, or
painted on a panel or area distinctively painted, textured, or constructed
as a background for the sign copy shall mean that area contained within
the smallest geometric shape that will enclose both the sign copy
and such background.
(2) The area of a sign having two faces shall not exceed
four square feet on either side.
B. Height. The height of a freestanding sign shall mean
the distance from the natural grade to the topmost portion of the
higher of the pole or sign.
The general provisions set forth below shall
apply to all signs within the Village of Sagaponack.
A. Wall signs.
(1) The total area of any wall sign shall not exceed 24
square feet. No more than one wall sign shall be permitted on any
wall facing a public street frontage for each business operating within
the building containing such wall.
(2) Wall signs shall not project more than one foot from
the walls on which they are mounted nor extend in any manner above
the facade or roofline of the building or structure containing such
wall.
B. Freestanding signs, including pole and monument signs.
(1) No freestanding sign, including pole and monument
signs, shall be permitted in the Village unless the entire building
to which it relates is set back from its front lot line a distance
of 40 feet or more. All such permitted signs shall be subject to the
setback requirements and the height and area restrictions of this
chapter.
(2) Each freestanding sign permitted hereunder shall be
set back at least 20 feet from all property lines.
(3) Only one freestanding sign shall be allowed for each
business.
(4) No pole sign in the Village shall exceed a maximum
area of 16 square feet and a maximum height of eight feet to the top
of its pole.
(5) Monument signs may have an area of up to 24 square
feet but shall not exceed six feet in height.
C. Window signs.
(1) No more than one sign per window or door shall be
permitted, provided that if there are more than two windows and/or
doors on any wall, no more than two such signs shall be permitted
on any such wall.
(2) Window signs shall not be illuminated.
(3) Window signs satisfying the above criteria are permitted in addition to any wall signs within the same building permitted under Subsection
A of this section.
(4) Temporary promotional or announcement signs placed
on the interior of a window may remain thereon for no more than 30
consecutive days.
D. Parking signs. Signs displaying parking-related information
shall not exceed two square feet in area, except to the extent required
by the State Department of Transportation regulations.
E. Real estate signs. Any property owner may display
anywhere on his property no more than one real estate sign, provided
that such sign shall not be illuminated; shall not exceed four square
feet in area and a height of four feet above natural grade; shall
not be placed in or interfere with any public or street right-of-way;
and shall not be placed on any other property. All such signs shall
be removed within 15 days after the property to which they relate
is no longer for sale, lease, rent or exchange.
F. Construction signs. No more than one construction
sign shall be displayed at any construction site. Such sign shall
not be illuminated, shall not have an area of more than eight square
feet and may only identify, in addition to the contractor or developer
of such site, no more than two contractors or subcontractors thereon.
Any such sign shall not interfere with any public right-of-way and
shall be removed no later than 15 days after completion of the project
to which it relates, the issuance of a certificate of occupancy or
compliance, or nine months from the date of its installation, whichever
occurs first.
G. Subdivision and site plan signs.
(1) No sign shall be placed upon any property that is the subject of a subdivision or site plan application unless it is approved, and complies with the conditions imposed by either the Planning Board or the AHRB or its successor, as required in §
245-28A(2). Any such approval shall indicate:
(a)
The area of such sign, which shall not exceed
24 square feet;
(b)
Its location, which shall be set back at least
20 feet from all property lines; and
(c)
The sale or construction period during which
it may be displayed, which shall not exceed one year, unless renewed.
(2) Any identification or other signs erected on any such
property following the completion of such activity shall be subject
to Planning Board approval.
Signs displayed by legally existing businesses
shall be permitted in the Village, as follows:
A. A residence may have no more than one professional
sign having a maximum area of two square feet.
B. A public or semipublic building may have no more than
one announcement sign, having no more than 24 square feet in area,
on each public street frontage of its property.
C. No more than one residential development identification
sign shall be permitted having a maximum of 12 square feet in area,
provided that it is set back at least 20 feet from the front property
line and at least 25 feet from all other property lines and is not
more than six feet above natural grade, and provided that it is in
compliance with the corner clearance requirements set forth herein.
Only those illuminated signs which meet the
following conditions, limitations and restrictions shall be permitted
in the Village.
A. Exterior signs. Exterior signs may only be lit externally
and shall only be illuminated with steady, stationary, shielded white
light sources directed solely down onto such signs, which light sources
shall not be visible from the street right-of-way nor cause glare
hazardous to pedestrians or vehicular traffic nor create a nuisance
to adjacent properties. When one light fixture is used to illuminate
such sign, the total maximum wattage shall not exceed 60 watts. When
two or more light fixtures are used to illuminate such signs, spacing
between such fixtures shall not be less than four feet and the total
maximum wattage per fixture shall not exceed 60 watts.
B. Display times. All permitted illuminated signs, whether
exterior or interior, shall be extinguished by 11:59 p.m. or when
the commercial use or activity to which they relate closes, whichever
is earlier.
C. Building illumination. Although not an illuminated sign, the outlining by direct or indirect illumination of all or part of a building, such as a gable, roof, window, wall, side or corner, shall, consistent with the purposes and intent of this article, be prohibited, except lighting consistent with the Chapter
119, Lighting, of the Village Code.
The following design guidelines shall be used
by the Planning Board and the AHRB in their review of signs:
A. Sign types. The choice of sign type shall depend upon
the surroundings and attention desired. Freestanding signs are to
be used in situations where there is a large setback from the street
or where there are several uses in one building or complex. Wall signs
are to be used where the attention of people in slow-moving cars or
pedestrians is desired.
B. Simplicity. Signs are to be simple, utilizing bold,
easily recognized symbols and clear, crisp lettering which will identify
a business or activity efficiently and attractively and complement
the general appearance of the street and Village.
[Amended 1-14-2008 by L.L. No. 2-2008]
C. Color. Restraint should be exercised when selecting
colors. On most signs, no more than three colors should be used: one
for background, a contrasting color for the lettering, and a third
color perhaps for emphasis (such as for borders, motifs, or shading
lettering to give it a three-dimensional look). In selecting the principal
colors for a sign, colors which are in harmony with the general tone
of the building should be chosen. The use of neon or day-glow-type
colors is prohibited. The use of colors that are muted (i.e., saturated
with white and/or gray to soften the color) and earth tone (i.e.,
beige, tan, brown, gray, forest green or burgundy) with a matte finish
is strongly encouraged.
D. Size. The size of the sign should be kept in scale
with the viewer's location and speed and with the building, never
covering architectural details (such as arches, transom windows, moldings,
columns, capitals, sills, cornices, etc.).
E. Materials. Sign materials should be consistent with
and complement the original construction materials and architectural
style of the building on which they are to be displayed. For this
reason, materials such as wood and metal are preferred to glossy plastic.
Internally lit plastic signs, neon signs and other similarly lighted
signs are prohibited.
F. Lettering. Lettering styles should complement the
style and period of the building on which they appear. Traditional
block and curvilinear styles, which are easy to read, are preferred.
No more than two different types of style should be used on the same
sign, to avoid a cluttered appearance.
G. Illumination. To conserve energy and reduce light
pollution, signs shall not be illuminated unless the premises is open
for business. The type of lighting that is most appropriate to the
historical character of the Village is direct illumination from a
shielded, low-intensity light source. Neon, plastic and internally
lit "box" signs are not appropriate in the Village.