Town of Clinton, NJ
Hunterdon County
By using eCode360 you agree to be legally bound by the Terms of Use. If you do not agree to the Terms of Use, please do not use eCode360.
Table of Contents
Table of Contents
[HISTORY: Adopted by the Mayor and Council of the Town of Clinton as indicated in article histories. Amendments noted where applicable.]
GENERAL REFERENCES
Fuel tanks and dumpsters — See Ch. 80.
Garbage, rubbish and refuse — See Ch. 82.
Land use — See Ch. 88.
Littering — See Ch. 94.
Recycling — See Ch. 109.
Sewer connections — See Ch. 111.
Sewers — See Ch. 112.
Soil removal — See Ch. 118.
Streets and sidewalks — See Ch. 122.
Water — See Ch. 142.
Protection of water supply — See Ch. 143.
[Adopted 11-24-2009 by Ord. No. 09-20]

§ 120-1 Purpose.

This article requires the retrofitting of existing storm drain inlets which are in direct contact with repaving, repairing, reconstruction or resurfacing, or alterations of facilities on private property, to prevent the discharge of solids and floatables (such as plastic bottles, cans, food wrappers and other litter) to the municipal separate storm sewer system(s) operated by the Town of Clinton so as to protect public health, safety and welfare and to prescribe penalties for the failure to comply.

§ 120-2 Definitions; word usage.

A. 
For the purpose of this article, the following terms, phrases, words and their derivations shall have the meanings stated herein unless their use in the text of this article clearly demonstrates a different meaning.
B. 
When not inconsistent with the context, words used in the present tense include the future, words used in the plural number include the singular number, and words used in the singular number include the plural number. The word "shall" is always mandatory and not merely directory.
MUNICIPAL SEPARATE STORM SEWER SYSTEM
A conveyance or system of conveyances (including roads with drainage systems, municipal streets, catch basins, curbs, gutters, ditches, man-made channels or storm drains) that is owned or operated by the Town of Clinton or other public body and is designed and used for collecting and conveying stormwater.
PERSON
Any individual, corporation, company, partnership, firm, association or political subdivision of this state subject to municipal jurisdiction.
STORM DRAIN INLET
An opening in a storm drain used to collect stormwater runoff and includes, but is not limited to, a grate inlet, curb-opening inlet, slotted inlet and combination inlet.
WATERS OF THE STATE
The ocean and its estuaries, all springs, streams and bodies of surface water or groundwater, whether natural or artificial, within the boundaries of the State of New Jersey or subject to its jurisdiction.

§ 120-3 Prohibited acts.

No person in control of private property (except a residential lot with one single-family house) shall authorize the repaving, repairing (excluding the repair of individual potholes), resurfacing (including top coating or chip sealing with asphalt emulsion or a thin base of hot bitumen), reconstructing or altering any surface that is in direct contact with an existing storm drain inlet on that property unless the storm drain inlet either:
A. 
Already meets the design standard below to control passage of solid and floatable materials; or
B. 
Is retrofitted or replaced to meet the standard in § 120-4 below prior to the completion of the project.

§ 120-4 Design standard; exceptions.

Storm drain inlets identified in § 120-3 above shall comply with the following standard to control passage of solid and floatable materials through storm drain inlets. For purposes of this section, "solid and floatable materials" means sediment, debris, trash, and other floating, suspended or settleable solids. For exemptions to this standard see Subsection C.
A. 
Grates.
(1) 
Design engineers shall use either of the following grates whenever they use a grate in pavement or another ground surface to collect stormwater from that surface into a storm drain or surface water body under that grate:
(a) 
The New Jersey Department of Transportation (NJDOT) bicycle safe grate, which is described in Chapter 2.4 of the NJDOT Bicycle Compatible Roadways and Bikeways Planning and Design Guidelines (April 1996); or
(b) 
A different grate, if each individual clear space in that grate has an area of no more than seven square inches, or is no greater than five inches across the smallest dimension.
(2) 
Examples of grates subject to this standard include grates in grate inlets, the grate portion (non-curb-opening portion) of combination inlets, grates on storm sewer manholes, ditch grates, trench grates and grates of spacer bars in slotted drains. Examples of ground surfaces include surfaces of roads (including bridges), driveways, parking areas, bikeways, plazas, sidewalks, lawns, fields, open channels and stormwater basin floors.
B. 
Whenever design engineers use a curb-opening inlet, the clear space in that curb opening (or each individual clear space, if the curb opening has two or more clear spaces) shall have an area of no more than seven square inches or be no greater than two inches across the smallest dimension.
C. 
This standard does not apply:
(1) 
Where the municipal engineer agrees that this standard would cause inadequate hydraulic performance that could not practicably be overcome by using additional or larger storm drain inlets that meet these standards;
(2) 
Where flows are conveyed through any device (e.g., end of pipe netting facility, manufactured treatment device or a catch basin hood) that is designed, at a minimum, to prevent delivery of all solid and floatable materials that could not pass through one of the following:
(a) 
A rectangular space 4 5/8 inches long and 1 1/2 inches wide (This option does not apply for outfall netting facilities); or
(b) 
A bar screen having a bar spacing of 0.5 inch.
(3) 
Where flows are conveyed through a trash rack that has parallel bars with one-inch spacing between the bars; or
(4) 
Where the New Jersey Department of Environmental Protection determines, pursuant to the New Jersey Register of Historic Places Rules at N.J.A.C. 7:4-7.2(c), that action to meet this standard is an undertaking that constitutes an encroachment or will damage or destroy the New Jersey Register listed historic property.

§ 120-5 Enforcement.

This article shall be enforced by the Public Works/Business Administrator, or his designee, of the Town of Clinton.

§ 120-6 Violations and penalties.

Any person(s) who is found to be in violation of the provisions of this article shall be subject to a fine not to exceed $1,000 for each storm drain inlet that is not retrofitted to meet the design standard.
[Adopted 11-24-2009 by Ord. No. 09-21]

§ 120-7 Purpose.

This article requires that dumpsters and other refuse containers that are outdoors or exposed to stormwater be covered at all times and prohibits the spilling, dumping, leaking or otherwise discharging of liquids, semiliquids or solids from the containers to the municipal separate storm sewer system(s) operated by the Town of Clinton and/or the waters of the state so as to protect public health, safety and welfare and to prescribe penalties for the failure to comply.

§ 120-8 Definitions; word usage.

A. 
For the purpose of this article, the following terms, phrases, words and their derivations shall have the meaning stated herein unless their use in the text of this article clearly demonstrates a different meaning.
B. 
When not inconsistent with the context, words used in the present tense include the future, words used in the plural number include the singular number and words used in the singular number include the plural number. The word "shall" is always mandatory and not merely directory.
MUNICIPAL SEPARATE STORM SEWER SYSTEM
A conveyance or system of conveyances (including roads with drainage systems, municipal streets, catch basins, curbs, gutters, ditches, man-made channels or storm drains) that is owned or operated by the Town of Clinton or other public body and is designed and used for collecting and conveying stormwater.
PERSON
Any individual, corporation, company, partnership, firm, association or political subdivision of this state subject to municipal jurisdiction.
REFUSE CONTAINER
Any waste container that a person controls, whether owned, leased or operated, including dumpsters, trash cans, garbage pails and plastic trash bags.
STORMWATER
Water resulting from precipitation (including rain and snow) that runs off the land's surface, is transmitted to the subsurface, is captured by separate storm sewers or other sewerage or drainage facilities or is conveyed by snow removal equipment.
WATERS OF THE STATE
The ocean and estuaries, all springs, streams and bodies of surface water or groundwater, whether natural or artificial, within the boundaries of the State of New Jersey or subject to its jurisdiction.

§ 120-9 Prohibited acts.

A. 
Any person who controls, whether owned, leased or operated, a refuse container or dumpster must ensure that such container or dumpster is covered at all times and shall prevent refuse from spilling out or overflowing.
B. 
Any person who owns, leases or otherwise uses a refuse container or dumpster must ensure that such container or dumpster does not leak or otherwise discharge liquids, semiliquids or solids to the municipal separate storm sewer system(s) operated by the Town of Clinton.

§ 120-10 Exceptions.

A. 
Permitted temporary demolition containers.
B. 
Litter receptacles (other than dumpsters or other bulk containers).
C. 
Individual homeowner trash and recycling containers.
D. 
Refuse containers at facilities authorized to discharge stormwater under a valid NJPDES permit.
E. 
Large bulky items (e.g., furniture, bound carpet and padding, white goods placed curbside for pickup).

§ 120-11 Enforcement.

This article shall be enforced by the Public Works/Business Administrator, or his designee, of the Town of Clinton.

§ 120-12 Penalties.

Any person(s) who is found to be in violation of the provisions of this article shall be subject to a fine not to exceed $1,000.