This article shall be known as "Maintenance
of Vacant Buildings" and is supplementary to applicable provisions
of the New York State Fire Prevention and Building Code.
This article provides standards governing the
facilities and the condition and maintenance of vacant premises to
safeguard the safety, health, and welfare of the community.
This article shall be applicable to the following:
A. Lots, plots or parcels of land on which buildings
designed for or developed for residential use or occupancy, mixed-occupancy
buildings, nonresidential occupancy or accessory structures are located;
and
B. Buildings designed for or developed for residential
use or occupancy, including one- and two-family dwellings and multiple
dwellings, mixed occupancy buildings, nonresidential occupancy and
accessory structures.
Provision for safe and continuous entry shall
be provided to the interior of a building or structure from the exterior
at a street or to a yard, court or passageway leading to a public
open area at any time entry is necessary for purposes of required
maintenance or inspection.
Railings and parapet walls shall be maintained
at open sides of balconies, mezzanines, porches, accessible roofs,
exit passageways, areaways, motor vehicle parking decks, and ramps
and around floor openings.
Chimneys, smokestacks, flues, gas vents, smoke
pipes and connectors shall be maintained structurally safe and smoketight.
Fuel gas pipe systems shall be maintained gastight,
safe, and operative under conditions of use or shall be disconnected
at the main.
Tanks shall be maintained so as not to be a hazard or shall be discontinued in a manner consistent with Chapter
C of the State Uniform Fire Prevention and Building Code (9 NYCRR).
Electrical fixtures, devices, wiring and systems
shall be maintained in safe working condition in a manner which will
avoid a potential source of ignition or shock or service shall be
disconnected at the supply.
Elevators, dumbwaiters and escalators shall
be maintained or taken out of service, in accordance with ANSI A17.1.