Users shall provide wastewater treatment as necessary to comply with this Ordinance and shall comply with all categorical pretreatment standards, local limits, and the prohibitions set out in Section 2.1 of this Ordinance within the time limitations specified by EPA, the state, or the Joint Sewer Authority, whichever is more stringent. Any facilities necessary for compliance shall be provided, operated, and maintained at the user's expense. Detailed plans describing such facilities and operating procedures shall be submitted to the Joint Sewer Authority for review, and shall be acceptable to the Joint Sewer Authority before such facilities are constructed. The review of such plans and operating procedures shall in no way relieve the user from the responsibility of modifying such facilities as necessary to produce a discharge acceptable to the Joint Sewer Authority under the provisions of this Ordinance.
A. 
Whenever deemed necessary, the Joint Sewer Authority may require users to restrict their discharge during peak flow periods, designate that certain wastewater be discharged only into specific sewers, relocate and/or consolidate points of discharge, separate sewage wastestreams from industrial wastestreams, and such other conditions as may be necessary to protect the POTW and determine the user's compliance with the requirements of this Ordinance.
B. 
The Joint Sewer Authority may require any person discharging into the POTW to install and maintain, on their property and at their expense, a suitable storage and flow control facility to ensure equalization of flow. A wastewater discharge permit may be issued solely for flow equalization.
C. 
Grease, oil, and sand interceptors shall be provided when, in the opinion of the Joint Sewer Authority, they are necessary for the proper handling of wastewater containing excessive amounts of grease and oil, or sand; except that such interceptors shall not be required for residential users unless a residential user who is contributing excessive amounts of grease, oil, or sand has first been given the opportunity to reduce the discharge by other means. All interception units shall be of type and capacity approved by the Joint Sewer Authority and shall be so located to be easily accessible for cleaning and inspection. Such interceptors shall be inspected, cleaned, and repaired regularly, as needed, by the users at their expense, in accordance with any procedure for the installation and maintenance of grease traps as may be established from time to time by the Joint Sewer Authority.
D. 
Users with the potential to discharge flammable substances may be required to install and maintain an approved combustible gas detection meter.
At least once every two (2) years, the Joint Sewer Authority shall evaluate whether each significant industrial user needs an accidental discharge/slug control plan. The Joint Sewer Authority may require any user to develop, submit for approval, and implement such a plan. Alternatively, the Joint Sewer Authority may develop such a plan for any user. An accidental discharge/slug control plan shall address, at a minimum, the following:
A. 
Description of discharge practices, including nonroutine batch discharges;
B. 
Description of stored chemicals;
C. 
Procedures for immediately notifying the Joint Sewer Authority of any accidental or slug discharge, as required by Section 6.6 of this Ordinance; and
D. 
Procedures to prevent adverse impact from any accidental or slug discharge. Such procedures include, but are not limited to, inspection and maintenance of storage areas, handling and transfer of materials, loading and unloading operations, control of plant site runoff (i.e., a spill prevention plan), worker training, building of containment structures or equipment, measures for containing toxic organic pollutants, including solvents, and/or measures and equipment for emergency response.
A. 
Septic tank waste may be introduced into the POTW only at locations designated by the Joint Sewer Authority, and at such times as are established by the Joint Sewer Authority. Such waste shall not violate Section 2 of this Ordinance or any other requirements established by the Joint Sewer Authority. The Joint Sewer Authority may require septic tank waste haulers to obtain wastewater discharge permits.
B. 
The Joint Sewer Authority shall require haulers of industrial waste to obtain wastewater discharge permits. The Joint Sewer Authority may require generators of hauled industrial waste to obtain wastewater discharge permits. The Joint Sewer Authority also may prohibit the disposal of hauled industrial waste. The discharge of hauled industrial waste is subject to all other requirements of this Ordinance.
C. 
Industrial waste haulers may discharge loads only at locations designated by the Joint Sewer Authority. No load may be discharged without prior consent of the Joint Sewer Authority. The Joint Sewer Authority may collect samples of each hauled load to ensure compliance with applicable standards. The Joint Sewer Authority may require the industrial waste hauler to provide a waste analysis of any load prior to discharge.
D. 
Industrial waste haulers must provide a waste-tracking form for every load. This form shall include, at a minimum, the name and address of the industrial waste hauler, permit number, truck identification, names and addresses of sources of waste, and volume and characteristics of waste. The form shall identify the type of industry, known or suspected waste constituents, and whether any wastes are RCRA hazardous wastes.