A. 
The Village's industrial districts are listed in Table 250-25 below. When this zoning law refers to industrial districts it is referring to the following:
Table 250-25
District Name
Abbreviation and Map Symbol
Light Industrial
LI
General Industrial
GI
B. 
The industrial district names and map symbols are intended to provide a general indication of what is allowed in the district by denoting the intensity, scale, and/or type of uses permitted.
A. 
Light Industrial (LI) District. The purpose of the LI District is to permit the operation of low-impact industrial and commercial activities within the Village in a manner that is consistent with the Village's adopted Comprehensive Plan. Development within the LI District should be campus-style in building design and layout and should facilitate internal pedestrian circulation systems that are linked to external walkways, where practicable. Unless otherwise stated in this chapter, industrial and manufacturing uses permitted within the LI District shall operate within a fully enclosed structure, with limited external operations or storage visible from the public right-of-way or adjacent residential properties.
B. 
General Industrial (GI) District. The purpose of the GI District is to permit the operation of commercial, industrial, manufacturing, and distribution activities in a manner that is consistent with the Village's adopted Comprehensive Plan. Larger industrial uses may be considered in this district due to the proximity of major thoroughfares and railway systems. All uses allowable within this district shall employ techniques to minimize negative impacts on adjacent nonindustrial districts (including, but not limited to, traffic, parking, glare, noise, dust, odor, etc.), especially established residential districts and environmentally sensitive areas.
Uses are allowed in industrial districts in accordance with Table 250-27 below.
A. 
Uses identified with a "P" in the table are permitted as-of-right in the zoning district, subject to compliance with all other applicable standards of this zoning law.
B. 
Uses identified with a "SP" in the table may be allowed if reviewed and approved in accordance with the special use permit procedures contained in Article XVII of this chapter.
C. 
Uses not listed and those identified with a "-" are expressly prohibited.
Table 250-27
Uses by Industrial District
Use
LI
GI
Business and Commercial
1.
Animal hospital or veterinary clinic*
P
P
2.
Brewery or distillery
P
P
3.
Gasoline service station*
SP
SP
4.
Kennel*
SP
SP
5.
Laundromat or dry-cleaner
P
P
6.
Office, administrative or professional
P
P
7.
Vehicle sales*
SP
SP
8.
Vehicle service or repair shop*
SP
SP
Industrial
9.
Animal slaughter facility
10.
Enclosed manufacturing, processing, or production facility
P
P
11.
Enclosed packaging facility
P
P
12.
Enclosed research and development facility
P
P
13.
Enclosed self-storage facility
P
P
14.
Junkyard
15.
Manufacture or bulk storage of explosives, chemicals, or petroleum
Other
16.
Adult use*
SP
17.
Agricultural operation
P
P
18.
Farm and garden crop production
P
P
19.
Municipal structure or use
P
P
20.
Off-street parking area
P
P
21.
Outdoor sales and display*
P
P
22.
Outdoor storage*
P
P
23.
Public utility
P
P
24.
School, occupational or skill training
P
P
25.
Telecommunications facility*
SP
SP
26.
Transportation terminal facility
SP
27.
Nonresidential accessory use or structure*
P
P
*
Indicates that additional requirements for such use may be found in Article VIII, Additional Use Regulations, of this chapter.
The lot and yard requirements listed in Table 250-28 shall apply to the industrial districts.
Table 250-28
Lot and Yard Requirements
Requirement
LI
GI
A.
Minimum lot size
62,500 square feet
SPR1
B.
Minimum lot width
200 feet
SPR1
C.
Minimum front yard
40 feet
SPR1
D.
Minimum side yard
30 feet/50 feet2
SPR1
E.
Minimum rear yard
50 feet/75 feet2
SPR1
NOTES:
(1)
"SPR" indicates that site plan review is required to determine the appropriate regulation.
(2)
When adjacent to a residential use, the larger yard requirement shall apply.
The bulk requirements listed in Table 250-29 below shall apply to all uses within industrial districts.
Table 250-29
Bulk Requirements
Requirement
LI
GI
A.
Maximum building height:
Primary structure or use
35 feet
50 feet
Accessory structure or use
15 feet
20 feet
B.
Maximum lot coverage
30%
60%