In any new subdivision the street layout shall conform to the
arrangement, width and location indicated on the Official Map, County
jurisdictional highway system plan, Comprehensive Plan or plan component,
or precise neighborhood unit development plan of the Village of Williams
Bay, Wisconsin. In areas for which such plans have not been completed,
the street layout shall recognize the functional classification of
the various types of streets and shall be developed and located in
proper relation to existing and proposed streets, to the topography,
to such natural features as streams, to streams and tree growth, to
public convenience and safety, to the proposed use of the land to
be served by such streets, and to the most advantageous development
of adjoining areas. The subdivision shall be designed so as to provide
each lot with satisfactory access to a public street. In addition:
A. Arterial streets, as hereafter defined, shall be arranged so as to
provide ready access to centers of employment, centers of governmental
activity, community shopping areas, community recreation, and points
beyond the boundaries of the community. They shall also be properly
integrated with and related to the existing and proposed system of
major streets and highways and shall be, insofar as practicable, continuous
and in alignment with existing or planned streets with which they
are to connect.
B. Collector streets, as hereafter defined, shall be arranged so as
to provide ready collection of traffic from residential areas and
conveyance of this traffic to the major street and highway system
and shall be properly related to the mass transportation system, to
special traffic generators such as schools, churches and shopping
centers and other concentrations of population and to the major streets
to which they connect.
C. Minor streets, as hereafter defined, shall be arranged to conform
to the topography, to discourage use by through traffic, to permit
the design of efficient storm and sanitary sewerage systems, and to
require the minimum street area necessary to provide safe and convenient
access to abutting property.
D. Proposed streets shall extend to the boundary lines of the tract
being subdivided unless prevented by topography or other physical
conditions or unless, in the opinion of the Village Plan Commission,
such extension is not necessary or desirable for the coordination
of the layout of the subdivision or for the advantageous development
of the adjacent tracts.
E. Arterial street and highway protection. Whenever the proposed subdivision
contains or is adjacent to an arterial street or highway, adequate
protection of residential properties, limitation of access and separation
of through and local traffic shall be provided by reversed frontage,
with screen planting contained in a non-access reservation along the
rear property line or by the use of frontage streets.
F. Stream or lake shores shall have a minimum of 60 feet of public access
platted to the low-water mark at intervals of not more than 1/2 mile
as required by § 236.16(3), Wis. Stats.
G. Reserve strips shall not be provided on any plat to control access
to streets or alleys, except where control of such strips is placed
with the Village under conditions approved by the Village Plan Commission.
H. Alleys shall be provided in commercial and industrial areas for off-street
loading and service areas unless otherwise required by the Village
Plan Commission, but shall not be approved in residential districts.
Dead-end alleys shall not be approved, and alleys shall not connect
to an arterial street.
I. Street names shall not duplicate or be similar to existing street
names elsewhere in the Village, and existing street names shall be
projected wherever possible.
Whenever the proposed subdivision contains or is adjacent to
a limited access highway or railroad right-of-way, the design shall
provide the following treatment:
A. When lots within the proposed subdivision back upon the right-of-way
of an existing or proposed limited access highway or a railroad, a
planting strip at least 20 feet in depth shall be provided adjacent
to the highway or railroad in addition to the normal lot depth. This
strip shall be a part of the platted lots but shall have the following
restriction lettered on the face of the plat: "This strip reserved
for the planting of trees and shrubs, the building of structures hereon
is prohibited."
B. Commercial and industrial properties shall have provided, on each
side of the limited access highway or railroad, streets approximately
parallel to and at a suitable distance from such highway or railroad
for the appropriate use of the land between such streets and highway
or railroad, but not less than 150 feet.
C. Streets parallel to a limited access highway or railroad right-of-way,
when intersecting a major street and highway or collector street which
crosses said railroad or highway, shall be located at a minimum distance
of 250 feet from said highway or railroad right-of-way. Such distance,
where desirable and practicable, shall be determined with due consideration
of the minimum distance required for the future separation of grades
by means of appropriate approach gradients.
D. Minor streets immediately adjacent and parallel to railroad rights-of-way
shall be avoided, and location of minor streets immediately adjacent
to arterial streets and highways and to railroad rights-of-way shall
be avoided in residential areas.
The minimum right-of-way and roadway width of all proposed streets
shall be as specified by the Comprehensive Plan, Comprehensive Plan
component, Official Map, neighborhood development study; or jurisdictional
highway system plan; or if no width is specified therein, the minimum
widths shall be as shown on Table 1. Street sections are for standard arterial streets only.
Cross-sections for freeways, expressway and parkways should be based
upon detailed engineering studies. In addition:
A. Cul-de-sac streets designed to have one end permanently closed shall
not exceed 750 feet in length. All urban cul-de-sac streets designed
to have one end permanently closed without a center planting island
shall terminate in a teardrop turnaround having a minimum right-of-way
radius of 60 feet and a minimum outside curb radius of 48 feet, and
all urban cul-de-sac streets designed to have one end permanently
closed with a center planting island shall terminate in a teardrop
turn-around having a minimum right-of-way radius of 60 feet and a
minimum outside curb radius of 48 feet.
B. Temporary termination of streets intended to be extended at a later
date shall be accomplished with a temporary cul-de-sac in accordance
with the standards set forth above, or by construction of a temporary
"T" intersection 33 feet in width and 33 feet in length abutting the
right-of-way lines of the access street on each side.
C. Street grades.
(1)
Unless necessitated by exceptional topography subject to the
approval of the Plan Commission, the maximum center line grade of
any street or public way shall not exceed the following:
(c) Minor streets, alleys and frontage streets: 12%.
(d) Pedestrianways: 12% unless steps or stairs of acceptable design are
provided.
(2)
The grade of any street shall in no case exceed 12% or be less
than 1/2 of 1%. Street grades shall be established wherever practicable
so as to avoid excessive grading, the promiscuous removal of ground
cover and tree growth, and general leveling of the topography. All
changes in street grades shall be connected by vertical curves of
a minimum length equivalent in feet to 15 times the algebraic difference
in the rates of grade for arterial streets, and 1/2 this minimum for
all other streets.
D. Radii of curvature.
(1)
When a continuous street center line deflects at any one point
by more than 10°, a circular curve shall be introduced having
a radius of curvature on said center line of not less than the following:
(a)
Arterial streets and highways: 500 feet.
(b)
Collector streets: 300 feet.
(2)
A tangent at least 100 feet in length shall be provided between
reverse curves on arterial and collector streets.
E. Half streets. Where an existing dedicated or platted half street
is adjacent to the tract being subdivided, the other half of the street
shall be dedicated by the subdivider. The platting of new half streets
shall not be permitted.
Streets shall intersect each other at as nearly right angles
as topography and other limiting factors of good design permit. In
addition:
A. The number of streets converging at one intersection shall be reduced
to a minimum, preferably not more than two.
B. The number of intersections along major streets and highways shall
be held to a minimum. Whenever practicable, the distance between such
intersections shall not be less than 1,200 feet.
C. Property lines at street intersections shall be rounded with a minimum
radius of 15 feet or of a greater radius when required by the Village
Plan Commission, or shall be cut off by a straight line through the
points of tangency of an arc having a radius of 15 feet.
D. Minor streets shall not necessarily continue across arterial or collector
streets; but if the center lines of such minor streets approach the
major streets from opposite sides within 250 feet of each other, measured
along the center lines of the arterial or collector street, then the
location shall be so adjusted that the adjoinment across the major
or collector street is continuous; and a jog is avoided.
The widths, lengths, and shapes of blocks shall be suited to
the planned use of the land; zoning requirements; need for convenient
access; control and safety of street traffic; and the limitations
and opportunities of topography. In addition:
A. The length of blocks in residential areas shall not as a general
rule be less than 600 feet nor more than 1,500 feet in length unless
otherwise dictated by exceptional topography or other limiting factors
of good design.
B. Pedestrianways of not less than 10 feet in width may be required
near the center and entirely across any block over 900 feet in length
where deemed essential by the Village Plan Commission to provide adequate
pedestrian circulation or access to schools, parks, shopping centers,
churches or transportation facilities.
C. The width of blocks shall be wide enough to provide for two tiers
of lots of appropriate depth except where otherwise required to separate
residential development from through traffic. Width of lots or parcels
reserved or laid out for commercial or industrial use shall be adequate
to provide for off-street service and parking required by the use
contemplated and the area zoning restrictions for such use.
D. Utility easements for electric power and telephone service shall,
where practical, be placed on mid-block easements along rear lot lines.
The size, shape, and orientation of lots shall be appropriate
for the location of the subdivision and for the type of development
and use contemplated. The lots should be designed to provide an aesthetically
pleasing building site and a proper architectural setting for the
building contemplated. In addition:
A. Interior side lot lines shall be at right angles to straight street
lines or radial to curved street lines on which the lots face. Lot
lines shall follow municipal boundary lines rather than cross them.
B. Double-frontage and reverse-frontage lots shall be prohibited except
where necessary to provide separation of residential development from
through traffic or to overcome specific disadvantages of topography
and orientation.
C. Access. Every lot shall front or abut for a distance of at least
40 feet on a public street.
D. Area and dimensions of all lots shall conform to the requirements of Chapter
390, Zoning, for the subdivisions within the Village, to the Village of Williams Bay extraterritorial Zoning Ordinance for the subdivisions within the Village's extraterritorial zoning area, and to the Walworth County Zoning Ordinance for the subdivisions within the remainder of the Village's extraterritorial limits. Those building sites in the extraterritorial plat approval jurisdiction not served by a public sanitary sewerage system or other approved system shall be sufficient to permit the use of an on-site soil absorption sewage disposal system designed in accordance with Chapter SPS 383 of the Wisconsin Administrative Code. The width and area of lots located on soils suitable for the use of an on-site soil absorption sewage disposal system shall not be less than 150 feet in width and 40,000 square feet in area.
E. Depth of lots shall be a minimum of 120 feet. Excessive depth in
relation to width shall be avoided and a proportion of 2:1 shall be
considered a desirable ratio under normal conditions. Depth of lots
or parcels reserved or laid out for commercial or industrial use shall
be adequate to provide for off-street service and parking required
by the use contemplated.
F. Width of lots shall conform to the requirements of Chapter
390, Zoning, or other applicable ordinance.
G. Corner lots shall have an extra width of 20 feet to permit adequate
building setbacks from side streets.
H. Lands lying between the meander line and the water's edge and any
otherwise unplattable lands which lie between a proposed subdivision
and the water's edge shall be included as part of lots, outlots or
public dedications in any plat abutting a lake or stream.
Building setback lines appropriate to the location and type
of development contemplated, which are more restrictive than the regulation
of the zoning district in which the plat is located, may be required
by the Village Plan Commission and shall be shown on the final plat
or certified survey map. Examples of the application of this provision
would include requiring greater setbacks on cul-de-sac lots to achieve
the necessary lot width at the setback line, requiring greater setbacks
to conform to setbacks of existing adjacent development, or setting
special yard requirements to protect natural resource elements.
The Village Plan Commission may require utility easements of
widths deemed adequate for the intended purpose on each side of all
rear lot lines and on interior side lot lines or across lots where
necessary or advisable for electric power and communication lines,
wires, conduits, storm and sanitary sewers, and gas, water and other
utility lines. Where a subdivision is traversed by a watercourse,
drainageway channel or stream, an adequate drainageway or easement
shall be provided as may be required by the Village Plan Commission.
The location, width, alignment and improvement of such drainageway
or easement shall be subject to the approval of the Village Engineer;
and parallel streets or parkways may be required in connection therewith.
Where necessary, stormwater drainage shall be maintained by landscaped
open channels of adequate size and grade to hydraulically accommodate
maximum potential volumes of flow. These design details are subject
to review and approval by the Village Engineer.
In the design of the plat, due consideration shall be given to the reservation of suitable sites of adequate area for future schools, parks, playgrounds, drainageways and other public purposes. If designated on the comprehensive plan, comprehensive plan component, or official map, such areas shall be made a part of the plat as stipulated in §
375-0203 of these regulations. If not so designated, consideration shall be given in the location of such sites to the preservation of scenic and historic sites, stands of fine trees, marshes, lakes and ponds, watercourses, watersheds and ravines. Accordingly, each subdivider of land in the Village of Williams Bay shall, at the discretion and direction of the Village Plan Commission, either dedicate open space lands designated on the Village Comprehensive Plan or plan component or reserve such open space lands and pay a public site fee or, where no open space lands are directly involved, pay a public site fee. The Village Plan Commission shall, at the time of reviewing the preliminary plat or certified survey map, select one of the following options and record such selection in the minutes of the meeting at which the preliminary plat is presented for approval:
A. Dedication of site option. Whenever a proposed playground, park,
or other public open space land designated on the Village's Comprehensive
Plan, neighborhood unit development plan, or other Comprehensive Plan
component is encompassed, all or in part, within a tract of land to
be subdivided, the public lands shall be made a part of the plat and
shall be dedicated to the public by the subdivider at the rate of
one acre for each 50 proposed or potential dwelling units; and any
such proposed public lands in excess of the rate established herein
shall be reserved for a period not to exceed three years, unless extended
by mutual agreement, for purchase by the public agency having jurisdiction
at undeveloped land prices. If the lands in excess of the established
rate are not acquired within the three-year period as set forth herein,
the land will be released from reservation to the owner.
B. Reservation of site option. Whenever a proposed playground, park, or other public open space land designated on the Village's Comprehensive Plan, neighborhood unit development plan, or other Comprehensive Plan component is encompassed, all or in part, within a tract of land to be subdivided, the proposed public open space lands shall be made a part of the plat and reserved at the time of final plat approval for a period not to exceed three years, unless extended by mutual agreement, for acquisition at undeveloped land prices by the public agency having jurisdiction and the subdivider shall pay a public site fee at the time of application for final plat approval at the rate and according to the procedures set forth in §
375-0709C of this chapter. If the land is not acquired within the three-year time period as set forth herein, the land will be released to the owner from reservation.
C. Public site fee option. If the proposed subdivision does not encompass a proposed public park, parkway, or other open space lands, or if the Village Plan Commission requires the reservation of land as set forth in §
375-0709B of this chapter, a fee for the acquisition of public sites to serve the future inhabitants of the proposed subdivision shall be paid to the Village Treasurer at the time of first application for approval of a final plat of said subdivision or part thereof in the amount of $750 for each proposed dwelling unit/lot within the plat. Public site fees collected by the Village Treasurer under the provisions of this chapter shall be placed in a nonlapsing special fund for Village parks and shall be separate from the General Fund of the Village, and said special fund shall be used exclusively for the acquisition and development of park, recreation, and other open space areas within the Village.