[Added 6-20-2005]
The Town of Derry Planning Board finds that:
A. 
Our Town contains an historic downtown area, multiple commercial and industrial districts, attractive residential neighborhoods, beautiful rural landscape replete with unique natural and cultural resources, an excellent architectural tradition, a colorful history, and much visual appeal.
B. 
Preserving and enhancing these features is integral to maintaining the character and identity of our community.
C. 
Building designs which are indifferent to the traditions of our Town and region, aggressively seek the attention of passing motorists, do not consider the quality of the pedestrian environment, or are erected at the lowest possible cost without due concern for aesthetics, harm the character of our community, depress property values, and impair our quality of life.
D. 
While subjectivity and judgment is invariably part of reviewing architectural designs there are universal principles of good design.
E. 
Well-crafted design standards can promote building design that is functional, economical, attractive, and harmonious. Quality development and sustainable economic development are not mutually exclusive; rather, they are interdependent.
This article is adopted pursuant to the Town of Derry Master Plan and New Hampshire Revised Statutes Annotated 674:16 (Grant of Power), 674:21 (Innovative Land Use Controls) and 674:44 (Site Plan Review Regulations).
A. 
The purpose of the architectural design regulations is to:
(1) 
Provide for high-quality architecture that respects universal design principles, enhances the appearance of Derry, reinforces pedestrian character where appropriate, and is sensitive to neighboring buildings, its own site, the broader setting, and natural and cultural resources.
(2) 
Protect and enhance the positive visual qualities of Derry's downtown, residential neighborhoods, commercial corridors, industrial parks, and scenic and rural landscapes.
(3) 
Encourage design which is compatible with the commonly recognized traditional character of Derry and New England.
(4) 
Enhance property values and foster civic pride.
(5) 
Minimize potential aesthetic conflicts between residential and nonresidential uses and between single-family and multifamily uses.
B. 
Adherence to these regulations should not be burdensome and they are not intended to stifle creativity or variety. On the contrary, the regulations will likely encourage more thoughtful approaches to building design. There is much flexibility embodied in the regulations and many ways of meeting the objectives. It is hoped that they will be useful for design professionals and applicants seeking to produce quality designs respectful of place and context.
A. 
Architectural design review is required as part of site plan review for all nonresidential structures and for all multifamily residential structures, as authorized in Chapter 165, Zoning, of the Town of Derry Code. This includes all new construction, building additions, and alterations to buildings if those alterations would affect the exterior appearance of the building. All applicable development must conform to these regulations as reasonably interpreted and applied by the Planning Board.
B. 
Architectural design review is not conducted for routine repair or maintenance of structures, any work on the interior of a building, any existing structures for which no exterior alterations are proposed, and modifications solely for the purpose of providing safe means of egress or access in order to meet requirements of the various building codes or safety codes, as may be adopted by the State of New Hampshire and the Town of Derry, from time to time.
Various sections of the Town differ from one another in character and in appropriate architectural treatment. The level of architectural design regulation compliance required for each zoning district is listed below, as may be authorized in Chapter 165, Zoning, of the Town of Derry Code.
A. 
Very high level of compliance with regulations:
(1) 
CBD/TBOD. These districts encompass the downtown area and are highly sensitive because of the importance and challenge of maintaining a pleasing pedestrian environment. This is the Central Business District, which includes the areas north and south of Broadway, with Rollins Street and Lenox Road on the north, Maple Street and Central Street on the west, Marlboro Road and Park Avenue on the east, down Birch Street to South Avenue on the south, back to Central Street. As one travels closer to the core areas traditionally the buildings are taller, closer to the sidewalk, built of more substantial materials, and more elaborate in design and detailing. This is the Traditional Business Overlay District that has frontage lots along East and West Broadway from Maple Street to Crystal Avenue and Birch Street.
(2) 
WRB. This district is bounded to the north by the lots now or formerly known as 2 and 4 Humphrey Road and 45 South Main Street, to the south, the frontage lots along South Main Street and Rockingham Road to include 120 Rockingham Road and 139 Rockingham Road, and to the east, the frontage lots on Rockingham Road beginning at 92 and 123 Rockingham Road, but excluding 2 Brady Avenue, ending at and including 74 Rockingham Road and 109 Rockingham Road. This district was created to retain the unique character that differs from the other commercial districts given its proximity to the historic West Running Brook.
[Added 12-18-2019]
B. 
High level of compliance with regulations:
(1) 
Residential districts: MFR/MHDR/CBD. These areas include multifamily residential districts as well as multifamily uses in the Downtown Central Business District and multifamily development in some of the older high-density residential neighborhoods close to the traditional core downtown area.
(2) 
OBD/OMBD. These areas are architecturally sensitive because some older neighborhoods that are zoned for mixed use have been harmed by incompatible multifamily and nonresidential development. These are transitional districts, and as such the new nonresidential components shall respect the character and nature of the existing residential uses. New development shall blend in with the traditional character of these neighborhoods in order not to diminish property values and the small scale pedestrian nature of these areas. These districts include the Office/Business District along West Broadway from the Londonderry Town Line to Maple Street, the Office/Medical/Business District which is the area along Birch Street adjacent to Parkland Hospital to Shute's Corner.
(3) 
Neighborhood commercial. This district would allow for limited retail sales in the residential districts in the outlying areas of Town, primarily in the Medium, Low-Medium and Low Density Residential Districts.
C. 
Medium high level of compliance with regulations:
(1) 
GC/GC-II/IND-II/IND-IV. It is important to enhance the quality of commercial development and light industrial along these corridors. All serve as gateways to our Town, carry high levels of traffic, and are the most prominent areas of the Town. On the other hand, an intensive automobile-oriented and big box/small box character is already established in many areas. This district includes different areas of Town. It includes the Route 28 (Rockingham Road) corridor, Ryan's Hill south to the Windham Town Line, the Webster's Corner area (Island Pond/Rockingham Road intersection), Crystal Avenue up to Ross' Corner, Folsom Road, By-Pass 28 and Tsienneto Road. It also includes the Route 28 (Manchester Road) corridor.
(2) 
IND-I/IND-III/IND-IV/IND-V/IND-VI/ORD. Derry seeks to enhance the quality of its industrial parks. These areas include industrial parks, office/research districts, office/light industrial districts and the Windham Road area, Ash Street Extension area, the area behind Ashleigh Drive and the area of A Street, B Street and Franklin Street.
A. 
An application is considered to meet the design requirements of the architectural design regulations if the Planning Board, in its judgment, determines that the application overall demonstrates substantial compliance with these regulations. In reviewing plans under these regulations, the Planning Board shall take into account the level of expected compliance based on the zoning district in which the development is to occur, as defined in § 170-84, the nature of the surrounding uses, style of the surrounding buildings, and special features of historic, cultural or community interest in the vicinity of the development.
B. 
The regulations contained herein do not expect to foresee all possible building situations. Decisions concerning such unforeseen situations will be made with these regulations in mind. Where the Planning Board finds unnecessary hardship may result from strict compliance with these regulations with respect to a particular tract of land, the Board may modify or waive these regulations so that substantial justice may be done and the public interest secured, provided that:
(1) 
The waiver shall not have the effect of nullifying the intent and purpose of these regulations;
(2) 
The Planning Board requires such conditions as will, in its judgment, secure the objectives of the regulations which are waived;
(3) 
The waiver is requested in writing;
(4) 
The waiver is based on evidence presented to the Board by the applicant;
(5) 
The Planning Board formally votes on such waiver; and
(6) 
The waiver is noted on the final approved plan.
C. 
Subject to specific architectural design requirements set forth in other sections of the chapter, no particular architectural style is stipulated, and innovative, contemporary, and distinctive designs are encouraged, provided that they are respectful of general design principles, and fit within the architectural context of the neighborhood.
[Amended 12-18-2019]
D. 
Buildings shall be compatible with traditional New England architecture. They shall be articulated to express an architectural integrity and design continuity.
E. 
While the use of a traditional architectural vernacular (gables, porticos, belt courses, etc.) is desirable, designers are encouraged to use this vocabulary in creative ways.
F. 
It is recognized that many national and regional chain businesses seek to build a standard design across the country or region without regard to local conditions. However, the Planning Board will evaluate all proposed designs for their compatibility with our own local community character and for conformance with the goals of these regulations. It shall be the obligation of the applicants to develop designs that are compatible with our community character; the Town need not make adjustments to accommodate these template designs.
G. 
Use of false or partial mansard roofs, unconventionally shaped roofs, overly bright colors, disproportionately sized building elements, crudeness of features, or a general plastic feel of the building, is not appropriate.
H. 
Buildings shall possess an overall integrity. Architectural details shall not give the impression of being tacked on but rather shall be integral to the overall design.
I. 
The reuse of existing structures that have special architectural, historical, cultural, or contextual value by the applicant is strongly encouraged.
J. 
Modifications and additions to existing buildings shall be harmonious with the character of the building.
K. 
Building design shall be consistent with other features of the site, signage, landscaping, lighting, fencing, outbuildings, etc.
L. 
Signage shall reflect the architectural character of the building.
A. 
Proposed designs will be evaluated on how well the project's theme, site design and building design are integrated into its neighborhood and the project's consistency with Derry's Master Plan. A checklist of design elements is available to facilitate a consistent and orderly evaluation of a project. The applicant is encouraged to use the checklist throughout the project's design process and in the presentation of that project to the Planning Board.
B. 
The design elements checklist includes two sections, site and building, based on the assumption that good design starts with site development and evolves into an integrated design plan for the proposed construction.
(1) 
Site portion of design elements checklist.
(a) 
The site portion of the design elements checklist addresses various elements, such as setbacks, alignment with the street, relative spacing with respect to other structures and the use of and integration with natural features. Buildings shall not be oriented at odd angles to the street unless this is already the prevailing pattern in the area or if it is dictated by strong topographic or site consideration.
(b) 
Site development shall address the quality of the streetscape and pedestrian friendly access especially in those districts that encourage village or downtown environments. Way-finding for both vehicles and pedestrians should not be dependant on just signage; there should be a natural progression defined by landscape, pathways and building forms that attract the user to the project. Buildings shall be brought to the front of the site with parking and service elements away from the street frontage. Lighting and landscape should enhance the spirit of the project, and advertising signage should be in proportion to the site and buildings.
(c) 
The building's orientation to the lot boundaries and to the streets shall be considered in the overall design. This pattern reinforces the streetscape.
(2) 
The building portion of the design elements checklist addresses:
(a) 
Building scale and proportion. Building elevations, scale, massing and the proportional relationship between structures can complement or detract from the architectural character of the surrounding area. The scale and proportion of proposed buildings shall take into consideration the scale and proportion of buildings as evidenced in the development pattern of the surrounding area. Visual conflicts between properties shall be minimized.
(b) 
Massing. The physical bulk or mass of buildings, particularly larger and elongated ones, can either enhance or detract from the architectural character of the community. Structures should be carefully designed to break up their mass into smaller visual components providing human scale, variation and depth.
(c) 
Roof. Rooflines can provide visual interest and help to reduce the apparent mass of a building. Traditional roofline types, such as gabled, hipped, and gambrel, that are evidenced in Derry's architectural heritage are strongly encouraged. Type, shape, pitch, and direction of roofs shall be considered in the design. Extensive areas of visible pitched roof should be broken up with dormers, cross gables, cupolas, chimneys, parapets, balustrades, and towers. Multistory buildings (three or more stories) are encouraged to have an interesting roofline that can include a pitched roof, some appropriate cornice or parapet detail or a combination of both. An unadorned flat roof is not acceptable in the areas where a high degree of compliance with these regulations is required.
(d) 
Building facade. Much attention shall be given to create an attractive building facade that relates to the function of the building. Broad expanses of blank walls are inappropriate. Traditionally, the parts of a facade that might be embellished, or at least articulated in some fashion include:
[1] 
A horizontal base where the building meets the ground (such as a different treatment for the foundation or water table).
[2] 
A horizontal top where the building's roof meets the sky (such as a projecting cornice with brackets for a flat roof or an articulated pitched roof).
[3] 
Horizontal sections (such as a belt course between stories or a change of material from the first to the upper stories).
[4] 
The building's corners (such as corner boards or quoins, a material or texture change).
[5] 
Vertical articulation in the middle (such as pilasters) the enhancement of the door/entry (such as a portico).
[6] 
The areas around the windows (such as window trim, lintels and sills). Depth shall be created for the facade through use of projecting or recessed sections, bay windows, or arcades and porches.
(e) 
Fenestration. Windows are an integral part of a building's facade and shall be incorporated on all building elevations, regardless of style, to humanize the building by giving it scale.
[1] 
If the building has traditional lines, windows shall follow the proportions typical of that style, where they tend to be more vertical rather than squat. In less traditional styles, window patterns need to be in proportion to the facade. In all cases, windows and doors shall establish an orderly, balanced pattern and rhythm that makes the building inviting.
[2] 
In pedestrian-oriented downtown, use of large picture-type windows for retail uses on the first floor is strongly encouraged. In residential areas and on upper floors of downtown buildings, use of multiple panes of glass (or the appearance of multiple panes) rather than picture-type windows is preferred. Windows abutting the street or sidewalk in downtown areas shall have a low window sill in relation to the street or sidewalk in order to create an open effect inviting to the pedestrian.
[3] 
Shutters, where appropriate, shall be sized properly for the window openings, approximately 1/2 the width of the opening, otherwise they shall not be used.
(f) 
Entrance. The entrance is a primary element in defining a building. Articulation of that entrance is encouraged through use of a portico, canopy, sidelights or other devices scaled to the building facade. There shall be a primary entrance, located on the facade facing the street or the facade which the well-designed site plan identifies as the front facade. In those zones where there is significant pedestrian traffic, this entrance must also have a direct relation to the path of pedestrian travel. Use of a usable front porch on multifamily residential buildings is also encouraged.
(g) 
Materials.
[1] 
The use of natural materials or materials that appear natural is preferred. Materials should be high-quality and durable. Wood (clapboard and shingle), brick, stone, and terra cotta are the preferred materials, although fabricated materials which effectively imitate the character of these materials are also acceptable. Conventional vinyl and aluminum siding arranged in a horizontal clapboard pattern is acceptable but not preferred. If these materials are used, the construction details that hide the J-trim joints are recommended. Vinyl and aluminum siding use is inappropriate in downtown areas. The use of fiber reinforced stucco, block, textured block, and split block are discouraged, except in industrial districts.
[2] 
Sheet plastic, sheet fiberglass, T-111 plywood, pecky shingles (shakes), simulated brick, and similar materials shall not be used. Use of highly reflective plastic or metal surfaces is inappropriate. Prefabricated metal wall panels and undressed concrete/cinder block shall not be used except in industrial park areas. When these materials are used in industrial park areas it is preferable to minimize the area over which they are used, minimize their use on front facades, and to combine their use with other materials, such as installing metal walls over a foundation of textured block.
(h) 
Color. Subtle colors are appropriate on larger, plain buildings, whereas smaller buildings with more detailing can more effectively incorporate brighter colors. Bright colors should be limited to accent areas. High-intensity colors, metallic colors, or fluorescent colors should not be used.
(i) 
Lighting. Use of low-key, low-intensity wall pack or spot type lighting, or lighting of signage on buildings is appropriate. Use of lighting to highlight the building in a prominent manner, such as brightly illuminated roof fins or neon tube lighting is discouraged. Unless otherwise approved by the Planning Board, all pole-mounted lighting fixtures shall be fed electricity by the use of underground electrical lines installed in accordance with the applicable electrical code. Proposed exterior lighting fixtures shall provide for a level of illumination appropriate for the proposed use or uses. Illumination patterns proposed shall be such that all sites subject to these regulations will enjoy an adequate level of lighting to insure user safety and security. However, care shall be taken to avoid lighting patterns and intensities which over light a site, creating nuisance and glare at abutting properties, public streets and the neighborhood in general. All lighting plans shall be subject to review and approval by the Planning Board.
[Added 12-18-2019]
A. 
General. The following architectural design standards shall apply to all structures.
(1) 
Buildings: scale and style. Buildings in new developments and those located on lots intended for substantial redevelopment shall relate in size and scale in alignment with the purpose of the district, which is to maintain the historic character of the West Running Brook area. Buildings shall reflect a continuity of treatment consistent with new development in the district specifically in relation to building scale and architecture. Structures located at an elevation of 250 to 300 feet above sea level shall not be taller than five stories, exclusive of attics. Structures located at an elevation of 301 to 350 feet above sea level shall not be taller than four stories, exclusive of attics. Structures located at an elevation of 351 to 500 feet above sea level shall be no taller than three stories, exclusive of attics. Structures located at an elevation above 500 feet above sea level shall be no taller than two stories, exclusive of attics. A “story” as defined for this district is limited to 10 feet in height.
(2) 
Corner lots. Buildings on corner lots shall be considered significant structures given that they have at least two front facades visibly exposed to the street.
(3) 
Walls and planes. Commercial buildings, including but not limited to those used for retail uses, shall avoid long, monotonous uninterrupted walls or roof planes. Offsets, including projections, recesses, and changes in floor level, shall be used in order to add architectural interest and variety and to relieve the visual effect of a simple, long wall. Similarly, roofline offsets shall be provided in order to provide architectural interest and variety to the massing of a building and to relieve the effect of a single, long roof. Flat roofs should be avoided in favor of pitched roofs.
(4) 
Facades facing public streets. Buildings with more than one façade facing a public street or internal open space shall be required to provide multiple front façade treatments. The architectural treatment of the front façade shall be continued, in its major features, around all visibly exposed sides of a building. All sides of a building shall be architecturally designed to be consistent with regard to style, materials, colors, and details. Bland wall or service area treatment of side and or rear elevations visible from the public viewshed is discouraged.
(5) 
Roofs. Gable roofs with a minimum pitch of 9/12 should be used to the greatest extent possible. Where hipped roofs are used, it is recommended that the minimum pitch be 6/12. Both gable and hipped roofs should provide overhanging eaves on all sides that extend a minimum of one foot beyond the building wall. Flat roofs should be avoided on one-story buildings, but may be used on buildings with a minimum of two stories, provided that all visibly exposed walls shall have an articulated cornice that projects horizontally from the vertical building wall plane. Any rooftop mechanics should be out of view of pedestrian traffic.
(6) 
Windows/fenestration. Fenestration shall be architecturally compatible with the style, materials, colors, and details of the building, and appropriate to the setting. Windows shall be vertically proportioned wherever possible. To the extent possible, upper story windows shall be vertically aligned with the location of windows and doors on the ground level, including storefront or display windows. Blank, windowless walls are not permitted.
B. 
Adherence to these regulations should not be burdensome, and they are not intended to stifle creativity or variety. On the contrary, the regulations will likely encourage more thoughtful approaches to building design. There is much flexibility embodied in the regulations and many ways of meeting the objectives. It is hoped that they will be useful for design professionals and applicants seeking to produce quality designs respectful of place and context.
A. 
Gasoline station. Canopies shall incorporate features to avoid the sense of a large, hovering mass. A pitched roof or other traditional roof form shall be used. Attractive examples include the Irving Station in Derry (Bypass 28 and Tsienneto Road). The fascia of the canopy shall be short in height, generally not to exceed two feet. All vertical surfaces shall be nonreflective, and colors should be muted. All lighting within the canopy shall be recessed.
B. 
Mini-warehouses/self-storage facilities. When these facilities are located on major roads, their design must be very carefully considered. Deep setbacks shall be established. The structures shall be located perpendicular to the road with no doors facing the road. Use of textured block, brick, wood, or stucco is preferred, though metal may be acceptable. Colors shall be muted.
C. 
Garages. To the extent practical, doors should be placed on side facades not facing the street, doors should be screened from view by landscaping or other structures, or garages should be set back a greater distance from the street. Where the garage is attached to the main building, it is preferable for the garage section to be subordinate to the main section by reducing the size and recessing it beyond the main section.
D. 
Utility elements. All utility elements, such as dumpsters, utility meters, and ground-mounted air conditioning units, shall be screened and located such that they are not visible from a public way or neighboring residential properties. Aboveground storage tanks shall be screened or hidden from view.
E. 
Fences. When necessary, fences shall be made of traditional New England materials, such as wood, wrought iron, brick, or stone. Use of chain link in front or side yards is discouraged. When they are used in these areas the chain links shall be covered in a colored vinyl (such as dark green) or equivalent. The design of any fencing shall be in character with the neighboring architecture and natural surroundings, and its scale and height shall be no greater than required to accomplish the purpose dictating the use of fencing.
A. 
The following items are required for site plan review, to facilitate architectural review. These submission requirements are in addition on any other submission requirements, as described in other sections of the Land Development Control Regulations.
(1) 
The site plan drawings are to show neighboring buildings, on a separate sheet or sheets, including those across the street, within a two-hundred-foot radius of the proposed development, at the same scale as the site plan.
(2) 
Photographs of the immediate neighborhood. Digital images taken in a three-hundred-sixty-degree panoramic series of shots are preferred.
(3) 
A landscape concept or landscape plan, depending on whether the submission is conceptual or a final submission. Refer to §§ 170-60B(12), 170-61A(20) and 170-64, for additional requirements.
(4) 
Lighting concept or lighting plan, depending on whether the submission is conceptual or a final submission. All such lighting plans shall, as a minimum, identify the location, number, height, type and intensity of all exterior lighting fixtures to be installed. Refer to §§ 170-60B(12) and 170-61A(19) for additional requirements.
(5) 
Signage concept or signage plan, depending on whether the submission is conceptual or a final submission. Refer to § 170-61A(22) for additional requirements. Additionally refer to Chapter 165, Zoning, of the Town of Derry Code for signage restrictions and requirements.
(6) 
Architectural elevations of each facade rendered in color. These shall also include facades of neighboring buildings, either as photos or drawn with simple detail. Include locations of any lighting proposed to be located on the building.
(7) 
An image of how the landscape will likely look in five years from the time of installation.
(8) 
Color of buildings, trim, etc.
(9) 
Actual samples of primary building materials/colors are not required, but accurate representations of all such materials, as to color, size, texture, and composition are required.
(10) 
Elevation drawings must be prepared by a registered engineer, architect, or landscape architect. Use of a registered architect is strongly encouraged.
B. 
As part of the overall site review process, the Technical Review Committee will review plans for compliance with these regulations and report to the Planning Board as to the level of adherence. At its option, the Planning Board may secure the services of a consulting architect or other professional to assist in the review of an application. The Board may impose reasonable fees upon an applicant to cover this expense.