The purpose of this chapter is to regulate the
design, construction, installation and maintenance of signs, awnings,
canopies, marquees, barber poles and illumination thereof in order
to:
A. Balance the right of individuals to identify themselves
and/or their businesses and to convey their messages with the right
of the public to be protected against the unrestricted proliferation
of signs.
B. Protect and enhance the physical appearance of the
community of the Village of Pelham by ensuring that the signs and
other items regulated by this chapter are appropriate to their architectural
context and the character of the Village.
C. Protect property values and create a more attractive
economic climate.
D. Protect the public health, safety and welfare.
E. Reduce sign distractions and obstructions that may
contribute to traffic accidents.
F. Protect residents in their homes as well as the public
either walking or in vehicles moving through the Village of Pelham
from distracting or disturbing light spillage and pollution from the
illumination of signs, awnings, canopies and marquees.
[Added 12-21-1999 by L.L. No. 2-1999]
In this chapter the following terms shall have
these meanings:
A-FRAME SIGN
A freestanding portable sign that has two faces that are
hinged at the top and open at the bottom and has light-gauged chains
or bars of equal length that attach the sides of the two faces near
their midpoints.
[Added 5-6-2014 by L.L. No. 3-2014]
ANIMATED SIGN
Any sign that uses movement or change of lighting to depict
action or create a special effect or scene.
[Added 12-21-1999 by L.L. No. 2-1999]
ARCHITECTURALLY DEFINED WINDOW SECTION
A window bay of a storefront that is separated from another
such window by an architectural feature such as a door, wall, partition,
or another architectural feature such as a column. Divided lights,
mullions and other elements framing the glass do not qualify as such
architectural features.
[Added 2-20-2001 by L.L. No. 1-2001]
AWNING
A roof-like covering having open sides and consisting of
a pliable material attached to a rigid or retractable frame.
BILLBOARD
A freestanding sign which directs attention to a business,
commodity, service or entertainment not conducted, sold or offered
on the premises where such sign is located.
CANOPY
A roof-like covering having closed sides and consisting of
a pliable material attached to a rigid frame.
CHANGEABLE COPY SIGN
A sign or portion thereof with characters, letters or illustrations
that can be changed or rearranged electronically or mechanically without
altering the face or the surface of the sign.
[Added 12-21-1999 by L.L. No. 2-1999]
DESIGNATED SIGN AREA
The area on a building's facade that the architect designated
as the sign area for the primary sign or, in the absence of such designation,
the area that the Architectural Review Board so designates.
FACADE
The building's general outer surface abutting and fronting
on a legal street.
FREESTANDING SIGN
A sign that is rigidly maintained on a structure which is
set in the ground within the property lines.
INTERIOR SIGNS
Signs, displayed within a premises and visible from outdoors,
including but not limited to signs that identify the occupant, announce
the hours of operation, list the telephone number and/or describe
the merchandise or services offered by the occupant of the premises.
LETTERING
Any lettering, numerals or pictorial matter.
MARQUEE
Any permanent roof-like shelter securely affixed to a building
and projecting from a building's facade.
PERPENDICULAR SIGN
Any sign the face of which is perpendicular to the facade
of a building.
PORTABLE SIGN
A movable sign, with or without wheels, including but not
limited to easel-type and A-frame signs.
PRIMARY SIGN
The principal sign that identifies a business by name, logo,
franchise or similar affiliation and a short description of the business.
[Amended 12-21-1999 by L.L. No. 2-1999; 2-20-2001 by L.L. No. 1-2001]
PUBLIC SAFETY NOTICES
Signs that are designed to protect the health and safety
of the public, including but not limited to push-pull signs, security
alarm signs, step up and step down signs and no-smoking signs.
[Added 12-21-1999 by L.L. No. 2-1999]
SECONDARY SIGN
A second sign that repeats all or part of the content of
the primary sign and/or includes the street address of the premises.
[Amended 12-21-1999 by L.L. No. 2-1999]
SELF-ILLUMINATED SIGN
A sign in which either:
[Added 12-21-1999 by L.L. No. 2-1999]
A.
The light source itself is shaped and utilized
to form the sign, such as neon or an array of individual lamps; or
B.
The light source, enclosed and thus obscured
from view, back-lights a translucent, transparent or opaque material
that forms the sign.
SIGN
Any lettering or ornamentation with related background on
or in a window, on any structure, on an A-frame, or displayed on the
inside of a building so as to be visible from the street, which:
[Amended 5-6-2014 by L.L. No. 3-2014]
B.
Identifies the presence of an institution;
C.
Identifies the presence, occupancy and existence
of an entity related to the property; or
D.
Directs attention to a business, commodity,
service or entertainment conducted, sold or offered either upon the
property or elsewhere.
SIGN AREA
A.
The sign area of an exterior sign is the area
of the sign's sign board or of the sign's lettering including any
related background that is distinguishable from the material or appearance
of the building's facade.
B.
The sign area of an interior sign or window
sign is the smallest rectangle which encompasses all of the lettering.
[Amended 12-21-1999 by L.L. No. 2-1999]
SWINGING POST SIGN
A sign hung from brackets attached to a post set in the ground
within the property lines.
TELEPHONE NUMBER
A telephone number of 10 digits for the business located
at the premises.
[Added 12-21-1999 by L.L. No. 2-1999]
TEMPORARY SIGN
Any sign, banner, bunting, pennant or advertising display
that is framed or unframed, is constructed of paper, cloth, canvas,
fabric, cardboard, wallboard, plastic or other material, and that
is intended to be displayed for a short period of time.
[Amended 12-21-1999 by L.L. No. 2-1999]
[Amended 11-21-2006 by L.L. No. 4-2006; 5-6-2014 by L.L. No. 3-2014]
A. Applications for a permit for items other than A-frame
signs shall be submitted on prescribed forms available from the Village
Clerk.
B. Applications may be submitted either by the building
owner or by the occupant of the premises. If the applicant is the
occupant, the building owner must endorse the application to indicate
consent.
C. Applications for a sign, awning, canopy, marquee or
barber pole shall include:
(1) A drawing that:
(a) Identifies the applicant's name, address and telephone
number;
(b) Identifies the building and the unit of occupancy
on which the item is to be erected;
(c) Indicates the existing signs or other items regulated
by this chapter and whether such existing items will remain or be
removed;
(d) Identifies the name, address and telephone number
of the person who prepared the drawing;
(e) Indicates the date of the original submission and
all revisions with notations identifying the revisions; and
(f) Indicates the setback from any freestanding sign,
swinging post sign, perpendicular sign, awning, canopy, marquee or
barber pole to the lot lines.
(2) An elevation, color rendering and specifications for
the proposed item that include:
(a) Its vertical, horizontal and depth dimensions;
(b) Its projection from the building;
(c) The total exterior wall length of the unit of occupancy
for which the sign is proposed and a minimum of 10 feet on either
side of the adjacent property drawn to the scale of one inch equals
four feet;
(d) The lettering, texture, color and materials of the
sign or structure;
(e) The engineering specifications for the method of attachment
of the item to the structure, if applicable;
(f) A fabric sample, if applicable;
(g) A detailed description and location plan of the illumination,
if any; and
(h) Such other information that the Architectural Review
Board and the Building Inspector may require to show compliance with
the provisions of this chapter.
D. Applications for a permit must be submitted to the
Architectural Review Board at Village Hall during regular business
hours.
E. The Architectural Review Board shall examine every application made pursuant to §
77-3. Once the Architectural Review Board has concluded that the proposed item conforms to this chapter, it shall approve the application and forward it to the Building Inspector.
F. After the Architectural Review Board has approved an application pursuant to §
77-3 and the Building Inspector has determined that a proposed structure meets the structural standards of all applicable codes, the Building Inspector must issue a permit once the applicant has provided:
(1) Payment of the permit fee established by resolution
of the Village Board of Trustees;
(2) Satisfactory evidence of compliance with the provisions
of the State Worker's Compensation Law;
(3) When required by §
77-6, satisfactory proof of insurance; and
(4) When required by §
77-9F(1), proof of approval by the Zoning Board of Appeals.
G. A permit shall be valid for 90 days.
[Added 5-6-2014 by L.L. No. 3-2014]
A. Applications for A-frame sign permits shall be submitted on prescribed
forms available from the Village Clerk.
B. Applications may be submitted either by the building owner or by
the occupant of the premises. If the applicant is the occupant, the
building owner must endorse the application to indicate consent.
C. Completed applications for an A-frame sign permit must be submitted
to the Village Clerk.
D. If the Building Inspector approves an application for an A-frame
sign permit, the Building Inspector will issue an A-frame sign permit
and a seal to be attached to the sign after the applicant has submitted:
(1) Payment of the permit fee established by resolution of the Village
Board of Trustees;
(2) A certificate of insurance for an insurance policy that meets the
following requirements:
(a)
An insurance company authorized to do business in New York State
must issue the policy.
(b)
The policy must list the Village of Pelham as an additional
insured.
(c)
The policy must specifically refer to the fact that the policy
is for the display of an A-frame sign on the sidewalk.
(d)
The policy must indemnify and save harmless the Village from
any and all judgments and expenses that the Village may incur or suffer
by reason of granting the A-frame sign permit.
(e)
The insurance policy and the insurance certificate must have
the endorsement: "No Cancellation of or change in this policy will
become effective until after the A-frame sign's permit seal has
been returned to the Village or until after 15 days' written
notice of such cancellation or change has been given by certified
mail to the Village Clerk, Village of Pelham, New York 10803."
(f)
Throughout the time the A-frame sign is in use, the required
insurance must be in effect.
(g)
Proof of every renewal of the required insurance policy must
be filed with the Village Clerk.
(h)
If the required insurance policy becomes ineffective or the
sign no longer has a valid permit, the holder of the A-frame sign
permit must immediately stop displaying the A-frame sign or the Village
of Pelham may remove the sign.
E. A-frame signs must always display a valid permit seal in the center
of the upper frame of the sign.
F. All A-frame sign permits shall be valid for no more than one calendar
year and shall expire on December 31. Each year applicants must apply
for new A-frame sign permits.
G. If a business changes ownership, a valid permit for an A-frame sign
may be transferred to the new owner if:
(1) The name of the business is the same.
(3) The new owner of the business files with the Village Clerk an amendment
to the permit application that indicates the name, address and telephone
number of the new business owner; and
(4) The new owner of the business files satisfactory proof of insurance
with the Village Clerk.
[Amended 12-21-1999 by L.L. No. 2-1999]
The following regulations are applicable to all property in the business and office districts, except for the properties of the institutions specified in §
77-11:
A. Signs.
(1) These signs are prohibited:
(c) Portable signs, with the exception of A-frame signs.
[Amended 5-6-2014 by L.L. No. 3-2014]
(d) Signs painted or papered directly on building walls.
(e) Moving or rotating signs, including but not limited
to animated signs and changeable-copy signs.
(f) Signs with fluorescent or iridescent colors and materials.
(g) Signs with mirrors or other excessively reflective
surfaces.
(h) Signs projecting more than two inches beyond the building
surfaces upon which they are mounted.
(i) Exterior and interior signs that are internally illuminated or self-illuminated, except as provided in §
77-9D(2) and
E(3)(b).
[Amended 2-20-2001 by L.L. No. 1-2001]
(2) Location of signs.
[Amended 2-20-2001 by L. L. No.
1-2001]
(a) No sign on private property shall be located so as
to:
[1]
Interfere with the vision of any driver entering
or leaving the property where the sign is located; or
[2]
Interfere with visibility of any driver at any
intersection or traffic light.
(b) With the exceptions set forth in §
77-9A(2)(e),
(f) and
(j), every exterior sign:
[Amended 5-6-2014 by L.L. No. 3-2014]
[1]
Shall be located on the facade in the designated
sign area; and
[2]
Shall be parallel to the facade to which it
is attached.
(c) With the exceptions set forth in §
77-9A(2)(d), a business is allowed no more than one primary sign and one secondary sign.
[1]
A primary sign must be displayed in the designated
sign area, on or in a window, on the valance of an awning or canopy
or on the face of a marquee.
[2]
A secondary sign must be located on or in a
window or on the valance of an awning or canopy.
(d) The exceptions to the numerical limits on primary
and secondary signs are the following:
[1]
Only businesses located on the corner of two
intersecting legal streets may have two primary signs. If such a business,
whether on the street level or on an upper floor of a building, displays
two primary signs, no more than one primary sign may face each legal
street, and both primary signs must be parallel to the street.
[2]
Businesses that elect to display the secondary
sign on a window instead of on an awning or canopy may place such
secondary sign on more than one window if:
[a]
The storefront has more than one architecturally
defined window section; and
[b]
Such secondary signs are identical in size,
typeface and color, and they are positioned in the same location on
the glass of each window section.
(e) Freestanding and swinging post signs are permitted
if the storefront or building is set back more than 10 feet from the
property line and if the sign meets the following requirements:
[1]
The face of the sign is parallel or perpendicular
to the street.
[2]
The top of the sign is no higher than the highest
point of the roof and no more than 15 feet above the top of the curb.
[3]
No part of the sign is within 10 feet of a side
lot line or, if located on a corner lot, no part of the sign is within
30 feet of the lot corner.
[4]
All illumination conforms to Subsection
E of this section.
(f) A perpendicular sign is permitted where the store front is set back 10 or more feet from the property line. This restriction however, does not apply to an A-frame sign, the required location of which is set forth in §
77-9A(2)(j).
[Amended 5-6-2014 by L.L. No. 3-2014]
(g) Telephone numbers.
[1]
Telephone numbers must not be displayed on a
primary sign.
[2]
Other than on an interior sign, a business telephone
number may be displayed in only one location for each business. It
may be displayed either:
[a]
With a secondary sign on the flap of an awning
or canopy; or
(h) Interior signs
[1]
Interior signs must be suspended or be displayed
on stands inside windows.
[2]
Signs must not be papered, taped, glued, painted upon or in any other way directly affixed to the glass of a window or door unless the signs are licensed primary or secondary signs or are signs permitted pursuant to §
77-4I,
J,
K,
L or
M.
(i) Exterior temporary signs. With the exception set forth in §
77-4E, only a business announcing its grand opening or change of ownership may display on the exterior of its premises bunting, banners, pennants or other temporary signs. Such display must be reasonable and remain for no more than 30 days.
(j)
A-frame signs. If a business is displaying a legal primary sign,
the business may display one A-frame sign. The A-frame sign is excluded
from the requirements for primary and secondary signs, but it must
meet the following requirements:
[Added 5-6-2014 by L.L. No. 3-2014]
[1]
The sign must be located on the sidewalk directly in front of
the business that it advertises.
[2]
The sign must not impede or obstruct pedestrian or vehicular
traffic.
[a]
There shall be on the sidewalk a minimum of four feet of open
space free of all obstructions, including but not limited to the A-frame
sign, sidewalk cafe furnishings, street trees, parking meters, fire
hydrants, and lamp posts.
[b]
No A-frame signs shall be placed on sidewalks opposite crosswalks,
bus stops or driveways.
[c]
To prevent obstructions in the line of sight of motorists and
impediments to pedestrian traffic, the A-frame sign for a business
located on a corner lot must be placed on the sidewalk within the
building lines.
[d]
A-frame signs shall not have moving parts, projections, lighting
or anything attached to them, including but not limited to streamers
and balloons.
[e]
Stability. Every A-frame sign must be stable. If necessary,
the sign must be braced to prevent collapse or toppling. If the Village
determines that an approved sign is unstable, the Village may remove
the sign without notice to the owner.
[3]
Hours of display. An A-frame sign may be displayed on the sidewalk
only during the hours when the business that the sign advertises is
open for business. When the business is closed, the holder of the
A-frame sign permit is responsible for removing the sign from the
sidewalk and storing it inside the premises of the business.
(3) Size of signs.
(a) The overall length of a sign area for the occupant
of part of a premises shall not exceed the length of the building
frontage possessed by such occupant.
(b) Buildings with business establishments, above the
first floor may display nameplates provided that the nameplates are
mounted next to the building's entrance, are no more than nine inches
high and 18 inches wide, are of uniform design and appearance, and
are compatible with the appearance of the building and its other signs.
(c) A directory to multiple business establishments located
in the same building is permissible, provided that the directory is
mounted next to the entrance of the building, is no more than 30 inches
high and 24 inches wide, and is compatible with the appearance of
the building and its other signs.
(d) The total area of all signs displayed on or in a window may not exceed 25% of the window area. This limitation on the area of signs applies to all licensed and unlicensed signs, including but not limited to primary signs, secondary signs, interior signs and signs described in §
77-4. The sole exceptions to this section are:
[Amended 2-20-2001 by L.L. No. 1-2001]
[1]
A business establishment may exhibit one neon sign that exceeds 25% of the window area, if the neon sign is the only sign displayed in the window and meets the requirements set forth in §
77-9E(3)(b)[1].
[2]
Business establishments located on the upper
floors of a building may exhibit in or on a window a primary sign
as well as a telephone number that combined exceed 25% of the window
area, provided that:
[a]
The lettering of the primary sign and of the
telephone number is on a clear background; and
[b]
The overall vertical dimension of the lettering of the primary sign is no more than eight inches and the overall vertical dimension of the telephone number complies with §
77-4M(2).
(e) Signs on the glass of every door are to be limited
in area so that the total area of all the signs, both licensed and
unlicensed signs, shall not exceed 25% of the area of the door's glass.
(f)
A-frame signs shall have a maximum height of four feet and a
minimum height of two feet except for A-frame signs of businesses
located on corner lots. The A-frame signs displayed by businesses
on corner lots shall have a maximum height of three feet and a minimum
height of two feet. The maximum width of all A-frame signs shall be
three feet.
[Added 5-6-2014 by L.L. No. 3-2014]
(4) Size of lettering.
[Amended 2-20-2001 by L.L. No. 1-2001]
(a) Primary signs. The vertical dimension of the lettering
of a primary sign shall be limited to 12 inches unless the sign is
located on an awning or canopy. The vertical dimension of the lettering
of a primary sign located on an awning or canopy and of any street
address displayed with such sign is limited to eight inches.
(b) Secondary signs. The vertical dimension of the lettering
of a secondary sign shall be limited to eight inches, with the following
exceptions:
[1]
Secondary signs that do not include the business
name and are located on the flap of an awning or a canopy displaying
a telephone number may have lettering with a vertical dimension of
no more than four inches.
[2]
Secondary signs that include the business name
and are located on the flap of an awning or a canopy displaying a
telephone number must comply with the following:
[a]
The vertical dimension of the lettering of the
business name must be no more than eight inches.
[b]
The telephone number must be located at one
end of the sign and must be balanced by the street address or logo
at the opposite end of the sign. A minimum of four character spaces
of the typeface used in the business name must separate the business
name and the nature of the business, if used as permitted, from all
other lettering.
[c]
The vertical dimension of the street address,
logo and telephone numbers may be no more than 50% of the size of
the lettering of the business name. When the lettering of the business
name includes upper- and lowercase letters, the vertical dimension
of the street address, logo and telephone numbers shall be no greater
than 50% of the size of the tallest lettering.
(5) Sign materials.
[Amended 5-6-2014 by L.L. No. 3-2014]
(a) An
exterior sign with the exception of A-frame signs, shall be a painted
signboard or consist of letters in relief applied to the sign area
or a signboard that is made of painted or natural wood, aluminum or
stainless steel. The use of reflective or high-gloss materials for
signboards is prohibited.
(b)
A-frame signs must have two faces of chalkboard that are of
equal size and are framed by wood, metal or other hard material. The
frames must provide stable contact with the sidewalk. A-frame signs
must not have wheels.
B. Awnings.
(1) An awning's frame must be supported entirely from
the building.
(2) An awning's pliable covering must be made of an opaque
material that is neither metallic nor reflective.
(3) At all times, all parts of an awning and its supporting
frame must be at least seven feet above the sidewalk and set back
at least five feet from the face of the curb.
(4) All awnings must be located over fenestration and
be limited to the size of that fenestration.
(5) When an awning projects beyond the property line and/or
into any required front, side or rear setback, it must be constructed
so that either it can be raised to a position flat against the building
when not in use or it can be totally removed in 30 minutes.
(6) Retractable awnings must be closed when an establishment
is not open for business.
(7) A primary or secondary sign may be displayed on an
awning.
(a) The lettering of an awning sign must be located on
the flap, apron or valance which must not exceed eight inches in height.
[Amended 2-20-2001 by L.L. No. 1-2001]
(b) The street number or address may be displayed with
a primary sign on an awning.
(c) The street number or address and one telephone number
may be displayed with a secondary sign on an awning.
C. Canopies.
(1) A canopy's pliable covering must be made of an opaque
material that is neither metallic nor reflective.
(2) At all times, all parts of the canopy, except any
supporting poles, must be at least seven feet above the sidewalk and
set back at least five feet from the face of the curb.
(3) All canopies must be located over fenestration and
be limited to the size of that fenestration.
(4) When a canopy projects beyond the property line and/or
into any required front, side or rear setback, it must be constructed
so that either it can be raised to a position flat against the building
when not in use or it can be totally removed in 30 minutes.
(5) Retractable canopies must be closed when an establishment
is not open for business.
(6) A primary or secondary sign may be displayed on a
canopy.
(a) The lettering of a canopy sign must be located on
the flap, apron or valance which must not exceed eight inches in height.
[Amended 2-20-2001 by L.L. No. 1-2001]
(b) The street number or address may be displayed with
a primary sign on a canopy.
(c) The street number or address and one telephone number
may be displayed with a secondary sign on a canopy.
(7) Canopies must not block pedestrians' views of the
signs and windows of neighboring businesses.
D. Barber poles.
(1) Barber poles may project no more than 18 inches over
public property.
(2) Internal electrical illumination of barber poles is
permissible if it is wired from an internal electrical source and
if the electrical work complies with all applicable electrical codes.
E. Illumination.
(1) All signs.
(a) Intermittent or flashing lighting and moveable lighting
with moveable parts are impermissible, including but not limited to
changeable-copy signs, animated signs and searchlights.
(b) All illumination must be electrical and comply with
all applicable electrical codes.
(2) Illumination of exterior signs, including but not
limited to those in the designated sign area, on awnings, canopies
and marquees must comply with the following:
(a) All lights shall be white.
(b) No illumination will be allowed unless the related
sign, awning, canopy or marquee is constructed of noncombustible material.
(c) The illumination must not create a glare that disturbs
residents in their homes, disturbs the vision of passing pedestrians
or motorists or constitutes a hazard to traffic.
[Amended 2-20-2001 by L.L. No. 1-2001]
[1]
All illumination must be from the exterior by
shielded lights that focus the light on the sign.
[2]
The shields must be 10 feet above the ground
or sidewalk and project no more than 36 inches beyond the sign fascia.
(d) All provisions for electrical service shall be concealed.
No exposed conduit, electrical boxes, splice boxes or related items
shall be allowed.
(3) Illumination of interior signs.
(a) Except as set forth below in §
77-9E(3)(b), all interior signs shall be externally lit. No such signs shall be self-illuminated.
(b) Neon signs. An establishment may display one or more
interior nonintermittent signs in neon under the following conditions:
[Amended 2-20-2001 by L.L. No. 1-2001]
[1]
No neon sign is more than two square feet in
area.
[2]
Neon signs may be illuminated only when the
establishment is open for business.
F. Gas stations and similar special conditions.
(1) Signs related to gasoline stations and similar special
conditions will not be allowed unless each specific proposal is recommended
by the Architectural Review Board and thereafter is approved by the
Zoning Board of Appeals as a special exception use.
(2) Subsection
F(1) does not apply to small signs which are standard equipment on gasoline pumps.
[Amended 12-21-1999 by L.L. No. 2-1999]
The following regulations are applicable to all properties within the residential districts, except for the properties of the institutions specified in §
77-11.
A. Signs.
(1) Location of signs.
(a)
All signs must be at least six feet from any
street or property line.
(b)
No sign on private property shall be located
so as to:
[Amended 2-20-2001 by L.L. No. 1-2001]
[1]
Interfere with the vision of any driver entering
or leaving the property where the sign is located; or
[2]
Interfere with visibility of any driver at any
intersection or traffic light.
(c)
The sign must be attached to the building or
displayed on a rod or post(s).
(2) Size and number of signs.
[Amended 2-20-2001 by L.L. No. 1-2001]
(a)
On residential properties:
[1]
No sign may be more than two square feet in
area.
[2]
Where there is more than one residential sign
for a single property, the total area of all such signs shall not
exceed five square feet for each detached residence.
(b)
On any properties of legally nonconforming use
which are not solely residential:
[1]
No more than one sign may be displayed.
[2]
The area of such sign may be no more than 10
square feet, with five feet as a maximum dimension.
(3) Illumination. It is prohibited to illuminate signs.
(4) Residential property identification signs.
[Amended 2-20-2001 by L.L. No. 1-2001]
(a)
One- and two-family residences in the Residence
A- 1, Residence A-2, Residence A-3, Residence B-1 and Residence B-2
Districts:
[1]
Each sign may display no more than the street
address and the names of the prime occupants.
[2]
No sign shall be permitted for a home occupation
or professional office, even if such use is permitted in the district.
(b)
In Residence M and Residence M-1 Districts:
[1]
Multifamily residences. At each exterior entrance
to a building there may be one sign. Each sign may display no more
than the street address.
[2]
One- and two-family residences. Each sign may
display no more than the street address and the names of the prime
occupants.
[3]
All residences. Each permissible professional
office or home occupation located on the premises may display one
unlit sign not exceeding one square foot and attached to the building
at the building's principal entrance.
(5) Business signs on any property of a legally nonconforming
use:
(a)
These signs require permits and licenses pursuant
to this chapter.
(b)
The signs must comply with:
[Amended 2-20-2001 by L.L. No. 1-2001]
[1]
§
77-9A(1) regarding the types of prohibited signs.
(c)
The signs shall be situated so that the top
of the signs shall be no more than six feet above the top of the curb.
B. Awnings, canopies and marquees.
(1) One- and two-family dwellings in Residence A-1, Residence A-2, Residence A-3, Residence B-1 and Residence B-2 Districts: Every awning, canopy or marquee shall comply with all setback requirements set forth in Chapter
98, Zoning.
(2) In Residence M and Residence M-1 Districts:
(a)
Multifamily residences.
[Amended 2-20-2001 by L.L. No. 1-2001]
[1]
Awnings.
[a]
An awning's frame must be supported entirely
from the building.
[b]
An awning's pliable covering must be made of
an opaque material that is neither metallic nor reflective.
[c]
At all times, all parts of an awning and its
supporting frame must be at least seven feet above the sidewalk and
set back at least five feet from the face of the curb.
[d]
All awnings must be located over fenestration
and be limited to the size of that fenestration.
[e]
When an awning projects beyond the property
line and/or into any required front, side or rear setback, it must
be constructed so that either it can be raised to a position flat
against the building when not in use or it can be totally removed
in 30 minutes.
[f]
Only the building's name and/or street address
or number may be placed on an awning. The lettering must be no more
than eight inches high and must be located on the flap, apron or valance
which must not exceed 10 inches in height.
[2]
Canopies.
[a]
A canopy's pliable covering must be made of
an opaque material that is neither metallic nor reflective.
[b]
At all times, all parts of the canopy, except
any supporting poles, must be at least seven feet above the sidewalk
and set back at least five feet from the face of the curb.
[c]
All canopies must be located over fenestration
and be limited to the size of that fenestration.
[d]
When a canopy projects beyond the property line
and/or into any required front, side or rear setback, it must be constructed
so that either it can be raised to a position flat against the building
when not in use or it can be totally removed in 30 minutes.
[e]
Only the building's name and/or street address
or number may be placed on a canopy. The lettering must be no more
than eight inches high and must be located on the flap, apron or valance
which must not exceed 10 inches in height.
(b)
One- and two-family residences: Every awning, canopy or marquee shall comply with all setback requirements set forth in Chapter
98, Zoning.
(3) Awning, canopies and marquees on any property of a
legally nonconforming use:
(a)
Require a permit and license pursuant to this
chapter.
(b)
Must comply with all setback requirements set forth in Chapter
98, Zoning.
(c)
Must comply with § 77-10B(2)(a)[1][a],
[b], [c], [d] and [f], as well as with § 77-10(B)(2)(a)[2][a],
[b], [c] and [e].
[Amended 2-20-2001 by L.L. No. 1-2001]
[Amended 12-21-1999 by L.L. No. 2-1999]
The following regulations are applicable to
the following institutions: a church, synagogue or other house of
worship or a parish house, school, club or public building where such
structure and use are permissible.
A. Signs.
(1) No more than two institutional name and announcement
signs will be allowed for such an institution.
(2) The face area of the name or announcement signs shall
not exceed 10 square feet.
(3) Location of signs.
(a)
The signs must be freestanding or fixed to the
main wall of a building.
(b)
All signs must be at least six feet from any
street or property line.
(c)
No sign shall be located so as to:
[Amended 2-20-2001 by L.L. No. 1-2001]
[1]
Interfere with the vision of any driver entering
or leaving the property where the sign is located; or
[2]
Interfere with visibility of any driver at any
intersection or traffic light.
(4) All illumination must comply with §
77-9E.
B. Awning, canopies and marquees:
(1) Must comply with all setback requirements set forth in Chapter
98, Zoning; and
(2) Must comply with § 77-10B(2)(a)[1][a], [b], [c], [d] and [f], as well as with §
77-10B(2)(a),
[2], [a], [b], [c] and [e].
[Amended 2-20-2001 by L.L. No. 1-2001]
Design, construction, erection, relocation and
maintenance of all items covered by this chapter shall conform to
the State Uniform Fire Prevention and Building Code and all other
applicable codes and ordinances.
[Amended 12-21-1999 by L.L. No. 2-1999; 2-20-2001 by L.L. No. 1-2001]
A. Any licensed sign, awning, canopy, marquee or barber pole which exists on the effective date of this chapter or any such amendment thereto and which conforms to previous laws, but does not conform to the current laws, shall be a legally nonconforming item and shall be allowed to remain for no more than 10 years from the date of the issuance of the license. Such an item may remain until the expiration of its valid license, and if the item's license is renewed pursuant to §
77-8, the item may remain for one renewal period of five years.
B. Any unlicensed existing sign that requires a license as well as any existing unlicensed awning, canopy, marquee or barber pole conforming to this chapter on the effective date of this chapter or any amendment thereto may remain, provided that a license for the item is issued by March 1, 2002. Otherwise, such signs, awnings, canopies, marquees and barber poles shall automatically become illegal and subject to the provisions of Subsection
C of this section.
C. Existing unlicensed signs that require a license as
well as any existing unlicensed awnings, canopies, marquees or barber
poles that did not conform to this chapter on December 25, 1998, shall
be termed illegal. Such illegal items must be conformed to and licensed
pursuant to this chapter not later than March 1, 2002. Otherwise,
the owner of the premises and the owner of the business displaying
the item shall be responsible for having the illegal items removed
not later than April 1, 2002.
D. All interior signs, signs affixed to windows and exempt
from the license requirement, and temporary exterior signs that exist
on the effective date of this Chapter or any such amendment thereto
and do not conform to the current ordinances shall be termed illegal.
Such illegal items must be removed or conformed to this chapter within
30 days after the effective date of this chapter.
The Village Board of Trustees may grant a variance
to the laws of this chapter when the Architectural Review Board recommends
that the architecture of a building is so distinctive that granting
such a variance is necessary to enhance the appearance of the subject
building and that granting such a variance is not detrimental to the
neighborhood.
[Amended 5-6-2014 by L.L. No. 3-2014]
Enforcement of this chapter shall be the duty
of the Architectural Review Board, the Building Inspector and any
other designees duly authorized by the Village Board of Trustees.
Each and every week a violation of the provisions
of this chapter continues shall constitute a separate offense.
If any clause, sentence, paragraph, section
or part of this chapter shall be adjudged by any court of competent
jurisdiction to be invalid, such judgment shall not affect, impair
or invalidate the remainder thereof but shall be confined in its operation
to the clause, sentence, paragraph, section or part thereof directly
involved in the controversy in which such judgment shall be rendered.
This chapter shall take effect upon its adoption
and filing with the Secretary of State.