The record subdivision plat shall be clearly and legibly drawn
with black waterproof India ink on a good quality of heavy clothbacked
white drawing paper. All lines, letters, figures, certificates, acknowledgments
and signatures shall be made in black India ink, except in the case
of standard forms. The plats shall be not more than 36 inches long
nor more than 24 inches wide and shall be drawn to a scale large enough
to show the details clearly but shall not be less than one inch equals
100 feet. A one-half-inch marginal border line shall be drawn around
the outer edge of each plat, and all data to appear thereon shall
be within said marginal lines.
[Amended effective 7-29-1980]
With said plat, there shall also be filed for the Town Engineer's
files a black line print thereof on tracing cloth and four prints
on paper.
The record subdivision plat shall conform to and shall contain
and show the following:
A. The title of the subdivision, North arrow, scale, date and the name
of the owner or owners.
B. A certification signed and sealed by the land surveyor making such
survey and plat who shall be duly registered in the State of Connecticut
to make such surveys, that it is made from the actual land survey
and is substantially correct.
C. The boundaries of the subdivision with courses and distances marked
thereon as determined by an accurate land survey, from control points
approved by the Town Engineer and noted on the drawing. The error
of closure must not exceed 1:5,000. The traverse sheets or a copy
thereof showing the error of closure of the field survey, and the
calculations for the final adjustment, if required, must be submitted
to the Town Engineer for approval.
D. The length, bearing or direction of all straight lines, deflection
angles, radii, arcs and central angles of all curves along the property
line of each street, all established building lines and all dimensions
along the lines of each lot all duly balanced so as to be consistent
throughout with the courses and distances of the boundary lines. All
dimensions shall be shown in feet and decimals of a foot.
E. The lines of all easements or rights-of-way to which any lots are
subject shall be denoted by fine dotted lines. The limits of the easements
or rights-of-way shall be definitely stated and clearly labeled and
identified.
F. The line of mean high tide in case the subdivision or any part thereof
is adjacent to tidewater.
G. The location of all monuments which are required to be set under the provisions of §
A221-34G hereof. At least one of these monuments, or a street line, shall be tied in by reference data to the horizontal control to other monuments of which the coordinates on the Town control are established or located by solar or Polaris observation.
H. All lines shown on the map which do not constitute a part of the
subdivision itself shall be broken lines or otherwise clearly distinguished
from the lines constituting a part of the subdivision.
I. Town boundary lines which cross or adjoin the subdivision shall be
clearly designated and tied in.
[Amended effective 7-29-1980]
With the record subdivision plat there shall be filed four additional prints on paper showing thereon the location of all proposed drainage facilities, storm and sanitary sewers, culverts, catch basins, bridges, curbs, sidewalks, paving and other improvements to be installed by the developer. A copy of this print shall be included in the bond required under §
A221-35 of these regulations.